Numark PT01 Scratch DJ Turntable User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setting Up the Turntable
4. Using the Turntable
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Welcome to the Numark PT01 Scratch DJ Turntable, a portable and feature-packed turntable designed for both beginners and experienced DJs. With a built-in adjustable user-replaceable Scratch Slide Switch, built-in speaker, and USB connectivity, the PT01 Scratch is perfect for scratching anywhere you go.

2. Package Contents

• Numark PT01 Scratch DJ Turntable
• Software Download Card
• USB Cable
• User Guide
• Power Adapter
• Safety & Warranty Manual

3. Setting Up the Turntable

1. Place the turntable on a flat, stable surface.
2. Connect the power adapter to the turntable and plug it into an available power outlet. Alternatively, you can power the turntable using 6 D batteries (not included).
3. Connect the turntable to your computer using the included USB cable if you wish to use the USB recording feature.
4. Attach the included cartridge to the tonearm and secure it with the provided screws.
5. Place the included slipmat on the platter.

4. Using the Turntable

1. Power on the turntable by pressing the power button.
2. Select the desired speed (33 1/3, 45, or 78 RPM) using the speed selector switch.
3. Place a vinyl record on the platter and secure it with the included slipmat.
4. Unlock the tonearm from its rest and carefully place it on the record.
5. Use the built-in Scratch Slide Switch to perform scratches and other DJ techniques.
6. Adjust the volume and tone controls to achieve the desired sound.
7. Connect headphones, external speakers, or other audio devices using the RCA outputs, headphone output, or 1/8 inch Aux input.
8. Use the USB connection to record your performance on your computer (Mac or PC) with compatible recording software.

5. Troubleshooting Tips

• If the turntable is not powering on, ensure that the power adapter is properly connected and the power outlet is functioning. If using batteries, ensure that they are properly installed and have sufficient charge.
• If the sound is distorted or muffled, adjust the tone and volume controls, and ensure that the cartridge is properly installed and secured.
• If the needle is skipping while scratching, consider purchasing a different needle or modifying the turntable with available upgrades.
• If the USB connection is not functioning properly, try using a different USB cable or port on your computer. Ensure that your computer and recording software are compatible with the turntable.

6. Frequently Asked Questions

Q: Can I use the turntable with larger vinyl records?

A: Yes, the PT01 Scratch can be used with 7", 12", and other size vinyl records.

Q: Can I power the turntable with a USB cable?

A: No, the USB cable is for connecting the turntable to a computer for recording purposes. The turntable can be powered by the included power adapter or 6 D batteries (not included).

Q: Is the built-in speaker loud enough for performances?

A: The built-in speaker is suitable for personal use and practice, but for performances or louder sound, it is recommended to connect the turntable to external speakers via the RCA outputs.

Q: Can I replace the Scratch Slide Switch with a different fader?

A: Yes, there are various aftermarket faders available for the PT01 Scratch, such as the Jesse Dean fader, which can be installed to enhance your scratching experience.

Q: Is this a direct drive or belt drive turntable?
A: The Numark PT01 Scratch is a belt drive turntable.

Q: What's the type of cartridge and stylus being used for pt01 scratch?
A: The Numark PT01 Scratch uses the Numark Replacement Cartridge and Stylus.

Q: Can you hook two up to a mixer?
A: Yes, you can connect two PT01 Scratch turntables to a mixer by plugging them into the line inputs.

Q: Will this interface with a pioneer DDJ mixer?
A: Yes, the Numark PT01 Scratch features RCA outputs and is suitable for operation with a Pioneer DDJ mixer.

Q: Will source loop music and scratching all go through USB for recording or is it just the scratching vinyl that gets recorded?
A: It depends on the software and abilities of the internal sound card of your computer. If you are utilizing the PT01 USB output that is stock, the USB only provides recording of the audio/time code vinyls being played on the turntable. If you want to process the audio both on the turntable and the output of the AUX input/output, you should run the output on the other side of the PT01 and it will be recorded as a unified audio output from the PT01 & the MPC/Looper program/other audio placed on the AUX in channel as a “mixed audio” signal. The easiest way to achieve this with quality is to install a USB/Bluetooth sound card in the PT01, which only requires four screws and no soldering, and doesn't break the warranty. This provides superior sound quality because it converts ALL signals input and output to digital. This also allows Bluetooth to be recorded into DAWs or any app/program that has a selection drop-down for “audio source” that Bluetooth is there.

Q: I want a 2nd turntable. I like the scratch feature, but it is not essential. Can I save some money buying the PT01 USB and use it for scratch sometimes?
A: Yes, you can scratch on both the PT-01 USB and PT-01 Scratch. The difference is that to scratch on the PT-01 USB, you must add a mixer to use its crossfader, whereas to scratch on the PT-01 Scratch, the turntable alone is enough as it includes a switch you can use as a crossfader to open/close the path to the vinyl audio signal.

Q: What's a good preamp to connect to this turntable? $30 bucks or less?
A: The Behringer One is a good preamp to connect to the Numark PT01 Scratch and is available for $30 or less.

Q: Has anyone used this with Serato?
A: Yes, the Numark PT01 Scratch works fine with Serato. You can get 7 inch Serato records off eBay.

Q: How can you record the audio when you scratch?
A: If you have any audio recording software on your computer, you can go from the Line Out of the PT01 Scratch to the audio input of your computer. From there, you can record anything that's playing from the PT01 Scratch to the audio recording software, including the scratches.

Overall, the Numark PT01 Scratch is an ultra-portable DJ turntable that can be powered by AC adapter or batteries and is suitable for scratching anywhere you go. It features a built-in adjustable user-replaceable Scratch Slide Switch exclusive to Numark that accommodates both right- and left-handed turntablists, as well as room-filling built-in speaker and RCA outputs for external speakers. It also includes a cartridge, removable slip-mat, and protective dust cover for convenience.