Pyle Wireless Portable PA System - PPHP1249KT User Manual

Table of Contents

1. Package Contents
2. Setting Up the PA System
3. Connecting Audio Sources
4. Using Bluetooth Connectivity
5. Adjusting Audio Levels
6. Troubleshooting Tips
7. FAQs

1. Package Contents

• 1x Active Speaker
• 1x Passive Speaker
• 2x Speaker Stands
• 1x Microphone
• 1x Remote Control
• 1x Power Cable
• 1x 1/4" SpeakOn Cable

2. Setting Up the PA System

1. Place the speakers on a flat, stable surface or mount them onto the included speaker stands.
2. Insert the speaker stands into the 35mm speaker stand mounts on the bottom of each speaker.
3. Adjust the height of the speaker stands by loosening the safety lock-in pin and extending the support arm. Tighten the safety lock-in pin once the desired height is reached.
4. Connect the active speaker to a power source using the included power cable.
5. Connect the passive speaker to the active speaker using the included 1/4" SpeakOn cable. Plug one end into the "Speaker Output" on the active speaker and the other end into the "SpeakOn Input" on the passive speaker.
6. Turn on the active speaker by pressing the power switch on the rear panel.

3. Connecting Audio Sources

You can connect various audio sources to the PA system using the following inputs:

• 3.5mm AUX input
• XLR microphone input
• USB flash drive
• SD memory card

4. Using Bluetooth Connectivity

1. Enable Bluetooth on your device (smartphone, tablet, etc.).
2. Select the PA system from the list of available Bluetooth devices. The system will be named "Pyle" followed by the model number (e.g., "Pyle PPHP1249KT").
3. Once connected, you can stream audio from your device to the PA system wirelessly.

5. Adjusting Audio Levels

Use the rear panel rotary dial and button control center on the active speaker to adjust the following audio levels:

• Master Volume
• Mic Volume
• Treble
• Bass

6. Troubleshooting Tips

• If the speakers are not producing sound, ensure that they are connected correctly and that the power is turned on.
• If the Bluetooth connection is not working, make sure your device's Bluetooth is enabled and that it is within range of the PA system.
• If you experience a buzzing sound, try replacing the 1/4" SpeakOn cable with a higher quality cable.
• If the remote control is not working, check the battery and replace it if necessary.

7. FAQs

Q: Can I use the PA system for karaoke?

A: Yes, you can connect a microphone to the XLR input and use the PA system for karaoke. You can also stream karaoke tracks from your device via Bluetooth or connect a device with karaoke tracks using the 3.5mm AUX input.

Q: How do I connect the PA system to my TV for surround sound?

A: To connect the PA system to your TV, you will need an optical cable, a digital-to-analog audio converter, and an RCA-to-XLR male patch cable. Connect the optical cable from your TV to the converter, then connect the RCA-to-XLR male patch cable from the converter to the PA system.

Q: Is the microphone that comes with the PA system wireless?

A: No, the included microphone is not wireless. If you prefer a wireless microphone, you can purchase a compatible wireless microphone set separately.

Q: Can I connect multiple devices to the PA system simultaneously?

A: You can connect multiple devices using different input methods (e.g., one device via Bluetooth and another via the 3.5mm AUX input), but only one audio source can be played at a time.

Q: What is the maximum power output of the Pyle Wireless Portable PA System?
A: The Pyle Wireless Portable PA System has a maximum power output of 1800 watt peak power / 900 watt RMS.

Q: What are the dimensions and weight of the product?
A: The product dimensions are 34 x 31 x 57.5 inches and it weighs 33.5 pounds.

Q: Does this system come with a manufacturing warranty?
A: Yes, this product comes with a limited 1-year warranty.

Q: Can you add a sub to this system?
A: Yes, you can add a powered sub to this system.

Q: Is there a way to buy only the secondary speaker?
A: No, you cannot buy only the secondary speaker for this particular pair of speakers.

Q: How does it charge? Do you have to have it plugged in to a power source to work?
A: This unit does not have a built-in battery, so it needs to be plugged into a wall outlet for it to work.

Q: Does the remote work from the front AND back of the speaker?
A: No, the remote only works from the front of the speaker.

Q: Is there an owner's manual included in the package?
A: No, but you can download the user's manual from the manufacturer's website by searching for the model number PPHP1249KT.

Q: Are there any source options for Line-In Auxiliary (USB, SD Card, Phone Direct Connect)?
A: No, there are no source selection options for Auxiliary Line-In USB & SD Card. The only available source options are Bluetooth Connection & FM Radio.

Q: Can I use this system without plugging it into a power source?
A: No, this system needs to be plugged into a wall outlet for it to work. It does not have a built-in battery.

Q: What is the load capacity of the speaker stands?
A: The maximum load capacity of each speaker stand is 100 lbs. (50 kgs.)

Q: Can I use a normal speakon cable that is plugged into a stage with the passive speaker?
A: It may not work with a normal speakon cable that is plugged into a stage.