Pyle 12 Inch Full Range Portable Bluetooth Karaoke Loudspeaker User Manual

Table of Contents

1. Getting Started
2. Connecting to Bluetooth
3. Using the Karaoke Microphone
4. Using the FM Radio
5. Charging the Speaker
6. Troubleshooting
7. Frequently Asked Questions

1. Getting Started

Thank you for purchasing the Pyle PWMA1225BT Portable Bluetooth Speaker. Before using your new speaker, please read and follow these instructions carefully to ensure proper setup and operation.

1. Remove the speaker from the packaging.
2. Place the speaker on a flat, stable surface.
3. Ensure the power switch on the back of the speaker is in the "OFF" position.
4. Connect the provided power/charging cable to the speaker and plug it into an electrical outlet.
5. Turn the power switch to the "ON" position.
6. Your speaker is now ready for use.

2. Connecting to Bluetooth

To connect your device to the speaker via Bluetooth, follow these steps:

1. Ensure that the speaker is powered on.
2. On your Bluetooth-enabled device (smartphone, tablet, laptop, etc.), go to the Bluetooth settings and enable Bluetooth.
3. Search for available devices and select "PWMA1225BT" from the list.
4. Once connected, you can start streaming audio from your device to the speaker.

3. Using the Karaoke Microphone

To use the wireless handheld microphone, follow these steps:

1. Ensure that the speaker is powered on.
2. Turn on the wireless microphone by pressing the power button.
3. The microphone should automatically connect to the speaker.
4. Adjust the microphone volume and echo controls on the speaker to your desired settings.
5. You can now sing along to your favorite songs using the microphone.

4. Using the FM Radio

To use the built-in FM radio, follow these steps:

1. Ensure that the speaker is powered on.
2. Press the "Mode" button on the speaker until the FM radio is activated.
3. Use the "Tune" buttons to search for your desired radio station.
4. Adjust the volume to your desired level.

5. Charging the Speaker

To charge the built-in rechargeable battery, follow these steps:

1. Ensure that the speaker is powered off.
2. Connect the provided power/charging cable to the speaker and plug it into an electrical outlet.
3. Allow the speaker to charge until the battery indicator shows a full charge.

6. Troubleshooting

If you experience any issues with your Pyle PWMA1225BT Portable Bluetooth Speaker, try the following troubleshooting tips:

• Ensure that the speaker is properly connected to a power source and turned on.
• Check the volume level on both the speaker and your connected device.
• Make sure your Bluetooth-enabled device is within range of the speaker (up to 33 feet).
• Reset the Bluetooth connection by turning off your device's Bluetooth, then turning it back on and reconnecting to the speaker.
• For FM radio issues, ensure the speaker is in an area with good reception and try adjusting the antenna.

7. Frequently Asked Questions

Q: How long does the battery last on a single charge?

A: The built-in rechargeable battery can last up to several hours, depending on usage and volume levels. It is recommended to charge the speaker after each use to ensure optimal battery performance.

Q: Can I connect multiple microphones to the speaker?

A: The Pyle PWMA1225BT comes with one wireless handheld microphone and a beltpack transmitter with a headset mic. You can use both microphones simultaneously, but additional microphones cannot be connected to this speaker.

Q: Can I use the speaker while it's charging?

A: Yes, you can use the speaker while it is connected to a power source and charging.

Q: Is the speaker waterproof or water-resistant?

A: The Pyle PWMA1225BT Portable Bluetooth Speaker is not waterproof or water-resistant. Keep the speaker away from water or moisture to prevent damage.

Q: How do I adjust the bass and treble on the speaker?

A: The Pyle PWMA1225BT has built-in EQ controls for adjusting the bass and treble levels. Use the "Bass" and "Treble" knobs on the speaker to fine-tune the audio output to your preference.

Product: Pyle 12 Inch Full Range Portable Bluetooth Karaoke Loudspeaker, Karaoke Microphone, Built-in Rechargeable Battery with FM Radio. (PWMA1225BT), Black - Electronics

Q: What is the power output of this speaker?
A: The Pyle PWMA1225BT Portable Bluetooth Speaker has a power output of 60 watts.

Q: Is the speaker compatible with Bluetooth devices?
A: Yes, it has built-in Bluetooth technology that allows wireless streaming from your favorite devices such as your Smartphone, Tablet, Laptop, Computer, etc.

Q: Is this speaker portable?
A: Yes, the carry handle and rolling wheels make it entirely portable to easily transport your speaker wherever you are.

Q: What comes in the package?
A: The package includes a Powerful Portable PA Speaker, Wireless Handheld Microphone, Beltpack Transmitter & Headset Mic, Power/Charging Cable, and Audio Connection Cable.

Q: How long does the battery last?
A: The battery life depends on usage and volume level. However, according to customer reviews, it can last for at least an hour.

Q: How do I get the wireless headset working?
A: The transmitter will automatically connect to the unit once you power it on. Please make sure the headset is properly and securely connected to the unit. If troubleshooting doesn't work, kindly call their Technical Support Department at 718 535 1800 Press 2 then 1 from Monday to Friday 9 AM to 5 PM EST.

Q: What is the warranty for this product?
A: By purchasing the Pyle Portable Bluetooth Speaker, you receive a worry-free 1-year warranty and friendly customer service.

Q: What is the weight and dimensions of this product?
A: The Pyle PWMA1225BT Portable Bluetooth Speaker weighs 30.5 pounds and has dimensions of 14.89 x 10.99 x 27.17 inches.

Q: Is this product discontinued?
A: No, it is not discontinued.

Q: What is the special feature of this product?
A: The special feature of this product is its full-range speakers and Bluetooth connectivity, making it a great option for karaoke parties or other events.