Pyle Bluetooth Marine Receiver Stereo - User Manual

Table of Contents

1. Package Contents
2. Installation
3. Basic Operation
4. Bluetooth Connectivity
5. Hands-Free Calling
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Package Contents

• Pyle Bluetooth Marine Receiver Stereo (PLRMR27BTB)
• Power and Wiring Harness
• Metal Chassis Frame Bracket
• Outer Trim Frame Cover
• Remote Control

2. Installation

Before installation, please ensure that your boat's electrical system is 12V. Follow these steps to install your Pyle Bluetooth Marine Receiver Stereo:

1. Disconnect your boat's battery to avoid any electrical damage during installation.
2. Remove your existing radio (if applicable) and disconnect any wiring.
3. Connect the power and wiring harness to the back of the Pyle Marine Receiver Stereo.
4. Mount the metal chassis frame bracket in the desired location, ensuring it is secure.
5. Slide the receiver into the metal chassis frame bracket until it clicks into place.
6. Attach the outer trim frame cover to give a clean, finished look.
7. Reconnect your boat's battery.

3. Basic Operation

Turn on the receiver by pressing the power button. Use the front panel controls or the included remote control to access the following functions:

• Adjust volume using the volume knob or remote control buttons.
• Switch between AM/FM radio using the "Mode" button.
• Press the "Menu" button to access EQ settings and adjust bass, treble, balance, and fader.
• Insert a USB drive or SD card to play MP3 files.
• Connect an external device using the Aux-in port.

4. Bluetooth Connectivity

To connect your Bluetooth-enabled device to the Pyle Marine Receiver Stereo:

1. Enable Bluetooth on your device and ensure it is discoverable.
2. Press the "Mode" button on the receiver until "BT" is displayed on the LCD screen.
3. Select "Pyle" from the list of available devices on your Bluetooth device.
4. Once connected, you can stream audio from your device and control playback using the receiver's controls or the remote control.

5. Hands-Free Calling

To use the hands-free calling feature:

1. Ensure your phone is connected via Bluetooth (see Section 4).
2. When a call is received, the phone number will be displayed on the LCD screen.
3. Press the "Phone" button to answer the call. The built-in microphone will pick up your voice.
4. Press the "Phone" button again to end the call.
5. To redial the last dialed number, press and hold the "Phone" button.

6. Troubleshooting Tips

• If the receiver does not power on, check the wiring connections and ensure the boat's battery is connected.
• If there is no sound, check the speaker connections and ensure the volume is turned up.
• If the Bluetooth connection is not working, ensure your device's Bluetooth is enabled and in range.
• If hands-free calling is not working, ensure your phone is connected via Bluetooth and the built-in microphone is not obstructed.

7. Frequently Asked Questions

Q: Can I control the receiver with my smartphone?

A: Yes, once your smartphone is connected via Bluetooth, you can control audio playback using your phone or the receiver's controls.

Q: Is the Pyle Marine Receiver Stereo waterproof?

A: The receiver is designed for marine use and can withstand exposure to moisture, but it is not fully waterproof. Avoid direct contact with water.

Q: Can I connect multiple devices via Bluetooth?

A: The receiver can only be connected to one Bluetooth device at a time.

Q: Can I play music from a USB flash drive?

A: Yes, insert a USB drive with MP3 files into the USB slot on the front panel to play music.

Product FAQ:

Q: What is the power output of the Pyle Bluetooth Marine Receiver Stereo?
A: The Pyle Bluetooth Marine Receiver Stereo has a peak power output of 300 Watts (75W x 4).

Q: Can I stream audio from my Bluetooth-enabled device with this receiver?
A: Yes, you can stream audio directly from your hand-held A2DP Bluetooth enabled device like iPhone, android, smartphones, iPad, tablets and play internet radio services like Pandora through your speakers with the help of this receiver.

Q: Does this boat indash console stereo receiver have a built-in mic for answering calls?
A: Yes, this boat indash console stereo receiver has a built-in mic for answering calls and the telephone number is displayed in the LCD panel digital display. It also has a call answer / end button and redial last dialed number function.

Q: What are the connectivity options for this marine radio?
A: This 12 volt easy to mount headunit console receiver system features digital LCD and crisp button and knob controls, Aux-in, USB / SD slot and AM FM radio, located in the front panel. It also has RCA line out jacks in the rear.

Q: What is the size of this black marine radio?
A: This black marine radio has a single DIN universal standard size design and replaces single din size radios.

Q: What is included in the package?
A: The package includes power and wiring harness, metal chassis frame bracket, outer trim frame cover, remote control.

Q: Can I charge my mobile device using the USB port of the unit?
A: Yes, you can charge your mobile device and other devices using the USB port of the unit.

Q: How do I supply constant DC power to the memory circuits if the power is disconnected when I park the vehicle?
A: The yellow wire (B+) connects directly to the battery for constant power and memory. The red wire (ACC) connects to an accessory switch.

Q: Is this unit compatible with Alexa Auto?
A: No, it is a basic unit.

Q: What is the shipping time for this product?
A: Shipping times may vary, but some customers have reported receiving their product within 2 days while others have reported up to 2 weeks.

Q: Does this unit have a control for preamp output?
A: No, the unit doesn't have a control for preamp output.

Q: What is the maximum speaker impedance for this stereo?
A: The stereo can only handle 4 ohms speakers.