Kanto YU4 Powered Speakers User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setting Up Your Speakers
4. Connecting to Audio Sources
5. Using the Remote Control
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Kanto YU4 Powered Speakers. These speakers are designed to deliver crystal-clear, detailed sound with a built-in phono preamp and Bluetooth connectivity. Please read this user manual carefully before setting up and using your speakers.

2. Package Contents

• 2 x Kanto YU4 Powered Speakers
• 1 x Remote Control
• 1 x Power Cord
• 1 x Speaker Wire
• 2 x AAA Batteries
• 1 x User Manual

3. Setting Up Your Speakers

1. Place the speakers on a stable, flat surface, preferably at ear level and at least 6 inches away from the wall.
2. Connect the speaker wire to the left and right speaker terminals located on the rear panel of each speaker. Make sure to match the red (+) and black (-) terminals on both speakers.
3. Plug the power cord into the AC IN port on the rear panel of the right speaker and then connect it to a power outlet.
4. Press the power button located on the rear panel of the right speaker to turn on the speakers.

4. Connecting to Audio Sources

YU4 speakers offer multiple connectivity options:

• Bluetooth: Press the Bluetooth button on the remote control or rear panel of the right speaker to enter Bluetooth mode. On your device, search for available Bluetooth devices and select "Kanto YU4" to connect.
• Phono Preamp: Connect your turntable to the RCA input on the rear panel of the right speaker. Set the PHONO/LINE switch to PHONO.
• RCA & AUX: Connect your audio source to the RCA or AUX input on the rear panel of the right speaker using the appropriate cable. Set the PHONO/LINE switch to LINE.
• Optical: Connect your digital audio source to one of the optical inputs on the rear panel of the right speaker using an optical cable.

5. Using the Remote Control

Insert the included AAA batteries into the remote control. The remote allows you to:

• Switch between audio sources
• Control volume and mute
• Control playback while streaming via Bluetooth
• Adjust bass and treble levels

6. Troubleshooting Tips

1. If you experience no sound or low volume, check that the speakers are turned on, the volume is turned up, and the audio source is properly connected.
2. If the Bluetooth connection is not working, ensure that the speakers are in Bluetooth mode and that your device is within range. Try disconnecting and reconnecting to the speakers.
3. If you hear distortion or poor sound quality, check that the audio source is not set to a low-quality output and that the speaker connections are secure.
4. If the remote control is not working, check that the batteries are inserted correctly and replace them if necessary.

7. Frequently Asked Questions

Can I connect a subwoofer to the YU4 speakers?

Yes, there is a SUB OUT port on the rear panel of the right speaker for connecting a subwoofer.

Do the YU4 speakers have a built-in USB DAC?

No, the YU4 speakers do not have a built-in USB DAC.

Can I use the YU4 speakers with my TV?

Yes, you can connect the YU4 speakers to your TV using the optical inputs or other available audio outputs on your TV.

Can I use the YU4 speakers with my computer or laptop?

Yes, you can connect the YU4 speakers to your computer or laptop using the AUX input, RCA input, or Bluetooth.

What is the range of the Bluetooth connection?

The Bluetooth range is approximately 33 feet (10 meters) without any obstructions.

Q: What are the dimensions of the Kanto YU4 Powered Speakers?
A: Each speaker measures 5.5" W x 7.5" D x 8.7" H (14 x 19 x 22 cm).

Q: Can the Kanto YU4 speakers be connected to a CD/DVD player?
A: Yes, they can be connected to most audio devices including CD/DVD players. They have RCA and AUX inputs, as well as two Optical TOSLINK ports for digital devices.

Q: Does the Kanto YU4 come with a stand?
A: No, it does not come with a stand. However, Kanto sells S4 stands separately in various colors, metals, and finishes.

Q: Are the Kanto YU4 speakers sold as a pair?
A: Yes, they are sold as a pair.

Q: Can I play sound from two different inputs at the same time on the Kanto YU4?
A: No, the YU4 can only play sound from one input at a time.

Q: Can I switch right and left channels on the Kanto YU4 speakers?
A: No, the YU4 does not have switchable channels. However, their new speaker TUK has that ability.

Q: Can I use the Kanto YU4 speakers for a turntable?
A: Yes, they have a built-in phono preamp which allows you to connect any vintage or modern turntable directly to your speakers.

Q: What is the peak power of the Kanto YU4 speakers?
A: The YU4 has a peak power of 140W (70 Watts Total RMS) with a frequency response of 60 Hz - 20 kHz.

Q: Does the Kanto YU4 come with a remote control?
A: Yes, it comes with a remote control that allows you to switch between sources, tune your sound, and control playback while streaming via Bluetooth.

Q: Can I use the Kanto YU4 speakers for a party by placing one speaker inside a room and the other on the balcony?
A: While it is possible to physically move the speakers like that with longer speaker wire, each speaker separated will not sound "correct" unless they are working together as a pair.