Canon 2140C001 Wireless Remote Control BR-E1 User Manual

Introduction

The Canon 2140C001 Wireless Remote Control BR-E1 is a Bluetooth-enabled remote controller designed for compatible Canon cameras. It allows you to wirelessly focus, take still photos, record videos, and control the zoom function using the Power Zoom Adapter PZ-E1. The operating distance is approximately 16 feet in any direction.

Compatibility

The Canon 2140C001 Wireless Remote Control BR-E1 is compatible with the following Canon camera models:

• PowerShot G5 X Mark II
• PowerShot G7 X Mark III
• EOS Rebel T7i
• EOS Rebel SL3
• EOS M50
• EOS M50 Mark II
• EOS RP
• EOS R
• EOS R6
• EOS R5
• EOS R3
• EOS R5 C

Package Contents

• Canon 2140C001 Wireless Remote Control BR-E1
• 1 Lithium Ion battery (required and included)

Pairing the Remote Control with Your Camera

1. Enable Bluetooth in your camera's menu.
2. Select "pairing" in the Bluetooth settings.
3. Hold down both zoom buttons (W and T) on the remote control.
4. When the camera asks if you'd like to pair with the BR-E1, confirm by selecting "yes".

Note: Pairing is a one-time operation for each device. If you disable Bluetooth and enable it later, the camera will remember the paired BR-E1.

Using the Remote Control

1. Put the camera in self-timer/remote mode.
2. Press the big round button on the BR-E1 to take a picture or start/stop video recording.
3. Use the three-way switch on the side of the remote control to toggle between immediate release, 2-second delay, and video release.

Bulb Mode

For bulb exposures, press the BR-E1 button once to open the shutter and again to close it. If the remote control is set to a 2-second delay, there will be a 2-second delay before the shutter first opens.

Mirror Lockup

To use the BR-E1 with mirror lockup (MLU):

1. Enable MLU in your camera's menu.
2. Enable self-timer/remote mode on your camera.
3. Set the 2-second delay on the BR-E1.
4. Press the big button on the BR-E1. The mirror will swing up, and the shutter will open two seconds later.

Troubleshooting Tips

• If the remote control is not responding, ensure that it is properly paired with your camera and that Bluetooth is enabled on your camera.
• Check the battery level of the remote control and replace the battery if necessary.
• Ensure that your camera is within the operating range (approximately 16 feet) of the remote control.
• Confirm that your camera is compatible with the Canon 2140C001 Wireless Remote Control BR-E1.

Frequently Asked Questions

Q: Can the remote control be used for bulb exposures?

A: Yes, the BR-E1 can be used for bulb exposures. Press the shutter release button once to open the shutter and again to close it.

Q: Does the remote control work with mirror lockup (MLU)?

A: Yes, the BR-E1 can be used with mirror lockup. Follow the instructions in the Mirror Lockup section of this user manual.

Q: What is the operating distance of the remote control?

A: The operating distance of the Canon 2140C001 Wireless Remote Control BR-E1 is approximately 16 feet in any direction.

Q: Is the remote control compatible with all Canon cameras?

A: No, the remote control is only compatible with specific Canon camera models. Check the Compatibility section of this user manual for a list of compatible cameras.

Q: How do I replace the battery in the remote control?

A: The remote control uses 1 Lithium Ion battery. To replace the battery, open the battery compartment on the back of the remote control and insert a new battery following the correct polarity.

Q: What is the Canon 2140C001 Wireless Remote Control BR-E1?
A: The Canon 2140C001 Wireless Remote Control BR-E1 is a wireless remote controller that is compatible with Bluetooth enabled cameras for wireless focusing, still shooting and video recording, and zooming using the Power Zoom Adapter PZ-E1. It has an operating distance of approximately 16 ft in any direction.

Q: What are the specifications of the Canon 2140C001 Wireless Remote Control BR-E1?
A: The product dimensions are 0.5 x 1.1 x 3.6 inches and it weighs 0.48 ounces. It requires one Lithium Ion battery to operate, which is included in the package. It has a maximum range of 5 meters and uses wireless Bluetooth connectivity technology.

Q: What devices is the Canon 2140C001 Wireless Remote Control BR-E1 compatible with?
A: It is compatible with the following devices: PowerShot G5 X Mark II, PowerShot G7 X Mark III, EOS Rebel T7i, EOS Rebel SL3, EOS M50, EOS M50 Mark II, EOS RP, EOS R, EOS R6, EOS R5, EOS R3, and EOS R5 C.

Q: Will this work on the Canon 6D?
A: Yes, it is compatible with the Canon 6D.

Q: Will this work with Canon G7X Mark II?
A: Only if your camera has Bluetooth.

Q: Do you have to re-sync the remote every time you want to use it and/or every time you turn the camera off/on?
A: Once set you don't need to re-sync but it's only available in timer mode.

Q: Will this work with the Powershot SX50HS for video?
A: No, it will not work with the Powershot SX50 HS as it does not have Bluetooth. However, it will work with the Powershot SX60 HS and SX70 HS as they have both WiFi and Bluetooth.

Q: Will this work with a Canon EOS M3?
A: It is not mentioned in the compatibility list provided by Canon's website. It is recommended to contact Canon directly for further information.

Q: Will this work with the EOS M6?
A: The Canon website states that the Remote Switch RS-60E3 and the Timer Remote Controller TC-80N3 can be used as a controller. It doesn't mention the BR-E1 so it may not fit the EOS M6. It is recommended to contact Canon directly for further information.

Q: Does it work on a Canon T7?
A: No, it does not work for the Canon EOS Rebel T7 as it is Bluetooth and the camera is WiFi.

Q: I am getting conflicting answers whether this works with the Canon 80D and the power zoom. Does it work or not?
A: According to Canon's website, the BR-E1 Wireless Remote Control is compatible with the Canon 80D and Power Zoom Adapter PZ-E1.

Q: What are some benefits of using the Canon 2140C001 Wireless Remote Control BR-E1?
A: The remote control helps eliminate camera shake in photos using slow shutter speeds by remotely triggering the shutter and/or AF. It can also trip the shutter from 16.4 feet above, below, behind or to the side of the camera so it makes a great substitute for a cable release. The remote control also allows video start/stop and focus without touching the camera.