Cerwin-Vega H746 HED(R) Series 2-Way Coaxial Speakers User Manual

Package Contents

• 2 x Cerwin-Vega H746 HED(R) Series 2-Way Coaxial Speakers
• Installation Hardware
• Speaker Wires

Installation

1. Disconnect your vehicle's battery to avoid electrical hazards.
2. Remove the existing speakers from your vehicle's dash or door panel, noting the wiring connections.
3. Connect the provided speaker wires to the Cerwin-Vega H746 speakers, ensuring that the positive (+) and negative (-) terminals match.
4. Connect the other end of the speaker wires to your vehicle's wiring harness or existing speaker connections.
5. Mount the Cerwin-Vega H746 speakers in the dash or door panel using the provided installation hardware.
6. Reconnect your vehicle's battery and test the speakers for proper operation.

Troubleshooting Tips

• If the speakers are not producing sound, ensure that the wiring connections are secure and that the speakers are connected to a working audio source.
• If the speakers are producing distorted or unclear sound, check the audio source settings and adjust the equalizer for optimal sound quality.
• If the speakers are lacking bass, keep in mind that these are 4" x 6" speakers and may not produce deep bass. Consider adding a subwoofer to your audio system for improved bass response.
• If the speakers are producing a rattling or buzzing noise, ensure that they are securely mounted and that there are no loose parts in the mounting area.

Frequently Asked Questions

Q: Can these speakers handle bass?

A: The Cerwin-Vega H746 speakers are designed for clear mids and highs. While they may produce some bass, they are not designed for deep bass output. Consider adding a subwoofer to your audio system for improved bass response.

Q: Are these speakers easy to install?

A: Yes, the Cerwin-Vega H746 speakers come with all necessary hardware and wires for installation. Simply follow the provided installation instructions to install these speakers in your vehicle.

Q: Do these speakers fit a 1997 Chevy S10?

A: Yes, the Cerwin-Vega H746 speakers are compatible with a 1997 Chevy S10 single cab dash speaker replacement.

Q: How do these speakers perform in a Jeep Wrangler?

A: The Cerwin-Vega H746 speakers have been reported to perform well in a Jeep Wrangler, even with the top off. However, keep in mind that these speakers are designed for clear mids and highs and may not produce deep bass.

Q: What is the warranty on these speakers?

A: Please refer to the manufacturer's warranty information for details on the warranty for the Cerwin-Vega H746 speakers.

Product FAQ:

Q: Is this a pair or two in a box?
A: Yes, this is a pair.

Q: What is the mounting depth?
A: The top-mount depth is 1.811 inches.

Q: How are the top mount depths actually measured?
A: It is measured from the bottom of the ring edge to the bottom of the magnet.

Q: Are they sold as singles or in pairs?
A: They are sold in pairs.

Q: Will they fit a Chevy Malibu 99?
A: Yes, they will fit. The original size is 4x6.

Q: What is the sensitivity rating and RMS wattage?
A: The sensitivity rating is 92dB, and the RMS wattage is 40 watts each.

Q: Can these speakers handle bass?
A: No, they cannot handle bass well due to their size.

Q: What is the frequency response range?
A: The frequency response range is 90 - 18000 Hz.

Q: Can these speakers be used for surround sound systems?
A: Yes, they can be used for surround sound systems.

Q: How much do these speakers weigh?
A: They weigh 2 pounds.

Q: What is the Best Sellers Rank for these speakers?
A: The Best Sellers Rank for these speakers is #14,341 in Electronics.

Q: Where are these speakers made?
A: These speakers are made in Switzerland.

Q: What kind of connectivity technology do they use?
A: They use wired connectivity technology.

Q: What type of speaker are they?
A: They are coaxial speakers.

Q: What is the maximum power handling capacity for these speakers?
A: The maximum power handling capacity for these speakers is 275 watts per pair, or 550 watts per pair.