LeeKooLuu LK3 Backup Camera Rear View Monitor Kit User Manual

Table of Contents

1. Package Contents
2. Installation
3. Operation
4. Troubleshooting
5. Frequently Asked Questions

1. Package Contents

• HD 1080P Waterproof Camera
• 4.3 Inch LCD Display Monitor
• 4-pin Cable with Power Cord Connector
• 12V DC Power Relay Capacitor Filter Rectifiers (for certain vehicle models)
• Installation Instructions

2. Installation

1. Choose a suitable location for the camera, preferably near the license plate. Attach the camera using the pre-installed bracket.
2. Connect the camera to the 4-pin cable and power cord connector. For continuous use, power the camera and monitor by connecting them directly to a 12V source fuse box, cigarette lighter, power point, or ignition switch. For use only when the vehicle is in reverse gear, connect the power cord to the reverse lights.
3. Route the cable from the camera to the front of the vehicle, hiding it in the trim as much as possible.
4. Choose a suitable location for the LCD display monitor, either on the dashboard or windshield, and attach it using the magnetic bracket. Connect the monitor to the 4-pin cable.
5. For certain vehicle models (e.g., VW, Dodge, Audi, BMW, and Mercedes), connect the 12V DC Power Relay Capacitor Filter Rectifiers if needed to improve image quality.
6. Test the system to ensure proper operation before completing the installation.

3. Operation

• Turn on the vehicle to activate the camera and monitor. The monitor will display the camera's view when powered on.
• Adjust the parking lines on the monitor by moving them left, right, up, or down to match the real environment. You can also turn off the parking lines if desired.
• The camera can be used as a rear backup camera or front camera, with the option to flip the image between mirror (rear view) and facing (front view).

4. Troubleshooting

• If the image on the monitor is grainy or flickering, try connecting the 12V DC Power Relay Capacitor Filter Rectifiers to improve image quality.
• If the camera is difficult to tilt, remove or loosen the four small screws that hold the camera to the license plate mount. Smooth any burrs on the case with a razor blade.
• If the cable is too short for your vehicle, contact the manufacturer for an extension cable.

5. Frequently Asked Questions

Can I use this camera for both front and rear views?

Yes, the camera can be used as a rear backup camera or front camera, with the option to flip the image between mirror (rear view) and facing (front view).

Is the camera and monitor compatible with all vehicle models?

The camera and monitor are designed to be compatible with most vehicle models. However, some vehicles may require the use of the included 12V DC Power Relay Capacitor Filter Rectifiers for optimal image quality.

Can I use the camera and monitor continuously, or only when the vehicle is in reverse gear?

You can choose to power the camera and monitor for continuous use by connecting them directly to a 12V source fuse box, cigarette lighter, power point, or ignition switch. Alternatively, you can connect the power cord to the reverse lights for use only when the vehicle is in reverse gear.

What if the cable is too short for my vehicle?

If the cable is too short for your vehicle, contact the manufacturer for an extension cable.

Does the camera have night vision?

Yes, the camera features 6 white LED lights and a digital high-definition image processor, providing superior night vision up to 30 feet in complete darkness.

Q: Is the camera waterproof?
A: Yes, the camera is IP 69K waterproof and can withstand any weather conditions.

Q: What is the display resolution of the camera?
A: The camera has an HD 1080P display that provides vivid picture quality for driving and backup use.

Q: Can I adjust the parking lines of the camera?
A: Yes, you can adjust the parking lines' width and move them left/right/up/down to fit the real condition.

Q: Does the camera have night vision?
A: Yes, the camera has upgraded 6 glass lens with a digital high-definition image processor that presents superior night vision up to 30 ft in complete darkness.

Q: How do I power the camera and monitor?
A: You can power the camera and monitor by directly connecting them to a 12v source fuse box or cigarette lighter/power point/ignition switch for continuous use. Alternatively, you can power it to reverse lights for use when the vehicle is in reverse gear.

Q: Can I buy an extra camera for this product?
A: Yes, you can buy an extra camera for this product. However, you cannot hook up two cameras to one monitor. The link to the extra camera is not provided.

Q: How do I mount the monitor?
A: The monitor comes equipped with a magnetic bracket that allows you to rotate it 360 degrees. You can mount it on dash or windshield using double-stick tape on the stand or suction cup windshield mount.

Q: What is the screen size of the monitor?
A: The screen size of the monitor is 4.3 inches.

Q: Is there a warranty for this product?
A: Yes, the backup camera system has a 2-year warranty and lifetime tech support. If you have any product questions, you can contact their customer service at [email protected].

Q: How do I switch between AV1 and AV2 on the monitor?
A: You cannot switch them manually. The AV2 has priority, so if both channel signals inputs, the monitor only displays AV2. Only AV2 turns off, then AV1 can be displayed.

Overall, this backup camera and monitor kit is a great value for its price. It is easy to install and comes with various wiring options. The camera is waterproof and has night vision capabilities, while the monitor has a magnetic bracket for easy mounting. Additionally, the product comes with a 2-year warranty and lifetime tech support for customer satisfaction.