Samsung SWA-8500S 2.0 Speaker System User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setting Up the Speakers
4. Pairing with a Compatible Samsung Soundbar
5. Adjusting Rear Speaker Volume
6. Mounting the Speakers
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Introduction

Welcome to the Samsung SWA-8500S 2.0 Speaker System! This wireless rear speaker kit is designed to expand your existing Samsung soundbar system, providing you with an immersive surround sound experience for your favorite movies, TV shows, and music. Please read this user manual carefully to ensure proper setup and usage of your new speaker system.

2. Package Contents

• 2 x Rear Speakers
• 1 x Wireless Receiver Module
• Speaker Cables
• User Manual

3. Setting Up the Speakers

1. Place the rear speakers in the desired location in your room, ideally behind or to the sides of your listening position.
2. Connect the speaker cables to the rear speakers and the wireless receiver module. Make sure the metal part of the cable is touching the clamp for proper connection.
3. Plug the wireless receiver module into a power outlet.

4. Pairing with a Compatible Samsung Soundbar

1. Ensure your compatible Samsung soundbar is turned off.
2. Press and hold the 'Up' arrow button on your soundbar's remote control for 5 seconds to enter 'LINK' mode. Some soundbars may require pressing and holding the 'Mute' button instead.
3. Once the soundbar displays 'LINK' on its LED display, it should automatically pair with the wireless rear speakers.

5. Adjusting Rear Speaker Volume

1. Press the 'Sound Settings' button on your soundbar's remote control (it may look like a cog) until 'REAR SPEAKERS' is displayed.
2. Wait for the display to show 'REAR SPEAKER VOLUME.'
3. Use the 'Up' and 'Down' arrow buttons on the remote control to adjust the rear speaker volume between -6 and +6. A setting of +4 is recommended for most users.

6. Mounting the Speakers

The Samsung SWA-8500S speakers can be wall-mounted or placed on speaker stands. To wall-mount the speakers, use the built-in keyhole slots on the back of each speaker. For speaker stands, consider purchasing stands with hidden wire management for a clean, clutter-free appearance.

7. Troubleshooting Tips

• If your rear speakers are not producing sound, ensure the speaker cables are properly connected with the metal part of the cable touching the clamp.
• If you are experiencing low volume from the rear speakers, follow the instructions in Section 5 to adjust the rear speaker volume.
• If you are having difficulty pairing the speakers with your soundbar, ensure you are following the correct pairing procedure for your specific soundbar model as outlined in Section 4.

8. Frequently Asked Questions

Q: Are these speakers compatible with all Samsung soundbars?

A: No, the SWA-8500S speakers are only compatible with select Samsung soundbars. Please refer to the product information for a list of compatible models.

Q: Can I use these speakers for multi-room audio?

A: These speakers are designed for surround sound and are not intended for multi-room audio setups.

Q: Are the speakers truly wireless?

A: The speakers connect wirelessly to the compatible Samsung soundbar via Wi-Fi, but they do require speaker cables to connect to the wireless receiver module.

Q: Can I adjust the volume of the rear speakers independently from the soundbar?

A: Yes, you can adjust the rear speaker volume independently from the soundbar. Please follow the instructions in Section 5 to adjust the rear speaker volume.

Q: What is the Samsung SWA-8500S Wireless Rear Speakers Kit?
A: The Samsung SWA-8500S is a wireless rear speaker kit designed to expand your existing sound system. It allows you to enjoy immersive, clutter-free sound by easily connecting the additional speakers wirelessly via Wi-Fi.

Q: Which Samsung soundbars are compatible with the SWA-8500S?
A: The SWA-8500S is compatible with select Samsung Soundbars, including HW-Q70R, HW-Q60R, HW-R650, HW-R550, HW-R450, HW-N400, HW-N450, HW-N550, HW-N650, HW-M360, HW-M450, HW-M4500, HW-M550, HW-Q60T, HW-T650, HW-S60T, and HW-T550.

Q: Can I use other speakers with this unit?
A: Yes, but it is recommended to check the rated power of the speakers versus the rated power of the receiving Bluetooth amp to avoid damaging either of them.

Q: How do I mount the speakers?
A: The SWA-8500S is wall-mountable. Speaker stands can also be used with additional hardware.

Q: Does the product come with an adapter for voltage?
A: It is not specified in the manufacturer-provided details whether an adapter for voltage is included in the package.

Q: Can I control the volume on the rear speakers?
A: Yes. To adjust the volume on the rear speakers, press the 'sound control' button on the soundbar remote to get to rear speaker on/off. Then press it one more time to get to rear speaker volume (-6 to +6). Use up/down arrows to adjust volume.

Q: Are these actual surround sound speakers or just "accent" sound?
A: The rear channels are discrete and provide true surround sound.

Q: How long are the speaker wires?
A: The speaker wires are approximately 10 feet long for both speakers.

Q: How do I pair the speakers with my soundbar?
A: Turn off the Samsung soundbar, then press the up arrow button for 5 seconds to go into LINK mode. Once you see the LINK mode on the LED display, the unit should pair with the wireless rear speakers.

Q: What is the output wattage of the SWA-8500S?
A: The output wattage of the SWA-8500S is 54 watts.

Q: What is the weight and dimensions of the product?
A: The item weighs 1.54 pounds and has dimensions of 3 x 3 x 5.7 inches.