Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm User Manual

Package Contents

• 1 x Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm (AC-053-CN1OTN-C1)

Installation

1. Power off your computer and unplug it from the power source.
2. Open your computer case and locate the PCI-E x16 slot on your motherboard where you want to install the graphics card.
3. Remove the backplate corresponding to the PCI-E x16 slot if necessary.
4. Align the connector on the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable with the PCI-E x16 slot on your motherboard.
5. Press the connector firmly into the PCI-E x16 slot until it clicks into place.
6. Route the 200mm cable to the desired location for your graphics card.
7. Align the graphics card with the connector on the other end of the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable.
8. Press the graphics card firmly into the connector until it clicks into place.
9. Secure the graphics card to the computer case or vertical mount using the appropriate screws or mounting hardware.
10. Close your computer case and reconnect the power source.
11. Power on your computer and verify that the graphics card is recognized and functioning properly.

Troubleshooting Tips

• If your graphics card is not recognized or not functioning properly, try reseating the connectors on both the motherboard and graphics card.
• Ensure that the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable is not damaged or bent excessively.
• Check for any compatibility issues between your graphics card and the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable. Some GPU/motherboard combinations may not work well with the extender.
• If you are experiencing performance issues, try running benchmarks and tests on your graphics card both with and without the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable to determine if the extender is causing the problem.
• If you continue to experience issues, contact Thermaltake customer support for further assistance.

Frequently Asked Questions

Q: Is the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable compatible with all graphics cards?

A: The extender is designed to be compatible with most GPU/motherboard components. However, some GPU/motherboard combinations may not work well with the extender. It is recommended to check for compatibility before purchasing.

Q: Will using the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable affect the performance of my graphics card?

A: Many users have reported no significant performance loss when using the extender with their graphics cards. However, individual results may vary depending on the specific GPU/motherboard combination.

Q: Can I use the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable for an SLI or Crossfire setup?

A: Yes, the extender can be used for an SLI or Crossfire setup. However, you will need one extender for each graphics card in the configuration.

Q: How much clearance is needed below the GPU mount for the connector?

A: You will need approximately 1 to 2 inches of clearance below the GPU mount for the connector.

Q: Is there a longer version of the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable available?

A: Yes, Thermaltake also offers a 300mm version of the extender for those who require a longer cable length.

Product FAQ:

Q: What is the Thermaltake TT Gaming PCI-E x16 3.0 Black Extender Riser Cable 200mm AC-053-CN1OTN-C1?
A: It is a PCI-E x16 3.0 compatible extender riser cable with a length of 200mm designed for improved compatibility and reduced interference.

Q: Is it compatible with most GPU/motherboard components?
A: Yes, it is compatible with most GPU/motherboard components.

Q: What are the specifications of this product?
A: The brand is Thermaltake, the model number is AC-053-CN1OTN-C1, and it weighs 2.4 ounces. Its dimensions are 10.2 x 4.2 x 0.5 inches, and it comes in black color.

Q: Is it EMI shielded?
A: Yes, it has an EMI shielded design that reduces interference.

Q: How long is the cable?
A: The cable length is 200mm.

Q: Will this extender riser cable work with the Thermaltake View 71 case?
A: Yes, it will work with the Thermaltake View 71 case.

Q: What is the maximum heat that this cable can handle?
A: It can handle around 120 degrees.

Q: Will this work with the View 27 case?
A: Yes, this cable can be used with the View 27 case.

Q: What is the difference between the 200mm and 300mm versions of this product?
A: The 300mm version is better shielded and more durable than the 200mm version. It is recommended for any normal case that requires extra length.

Q: Is this compatible with an Asus Z490E motherboard and Nvidia GeForce GTX 2080 Super GPU?
A: Yes, it should work just fine with this combination.

Q: Is this cable compatible with Nvidia GeForce 3070ti?
A: Yes, it should be compatible with any PCI 4.0 device.

Q: Will this cable work with the Corsair Obsidian 500 D case?
A: Yes, it will work if the case has vertical expansion slots.

Q: What are some customer reviews of this product?
A: Customers have reported that it is worth the extra money, has no loss in performance, is easy to install, and works great with both Nvidia and AMD GPUs. Some customers have reported issues with durability or compatibility with SLI configurations.