Riwbox WT-7S Bluetooth Headphones User Manual

Table of Contents

1. Package Contents
2. Charging the Headphones
3. Powering On/Off
4. Pairing with a Bluetooth Device
5. LED Light Control
6. Using Wired Mode
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Package Contents

• Riwbox WT-7S Bluetooth Headphones
• Riwbox D1 Audio Cable
• Micro USB Charging Cable
• User Manual

2. Charging the Headphones

Before using your Riwbox WT-7S Bluetooth Headphones for the first time, fully charge the battery. To charge the headphones, connect the included Micro USB charging cable to the charging port on the headphones and plug the other end into a USB power source (such as a computer or USB wall charger).

3. Powering On/Off

To power on the headphones, press and hold the power button for 3 seconds. You will hear a voice prompt saying "Power on" and the LED lights will start flashing. To power off the headphones, press and hold the power button for 3 seconds until you hear a voice prompt saying "Power off" and the LED lights stop flashing.

4. Pairing with a Bluetooth Device

1. Ensure your Bluetooth device (e.g., smartphone, tablet, etc.) is within 3 feet (1 meter) of the headphones.
2. With the headphones powered on, press and hold the power button for 5 seconds until the LED lights start flashing red and blue.
3. On your Bluetooth device, go to the Bluetooth settings and enable Bluetooth.
4. Search for available devices and select "Riwbox WT-7S" from the list.
5. Once connected, you will hear a voice prompt saying "Connected." The LED lights will flash blue.

5. LED Light Control

When using the headphones in Bluetooth mode, you can turn off the LED blinking effect to conserve battery life. To toggle the LED lights, press the "M" button located on the right side of the headphones. The LED lights will turn off or on depending on their current state.

6. Using Wired Mode

If the headphones run out of battery or you prefer to use a wired connection, connect the included Riwbox D1 audio cable to the headphone jack on the headphones and the other end to your audio source (e.g., smartphone, tablet, etc.). In wired mode, the headphones do not require power and the LED lights will not function.

7. Troubleshooting Tips

• If the headphones do not power on, ensure they are fully charged.
• If you cannot connect to a Bluetooth device, ensure the headphones are in pairing mode (LED lights flashing red and blue) and that your device's Bluetooth is enabled.
• If the audio quality is poor or the volume is too low, check the volume settings on both the headphones and your connected device.
• If the LED lights do not function, ensure the headphones are in Bluetooth mode and not connected using the audio cable.

8. Frequently Asked Questions

Q: How long does the battery last on a full charge?

A: The Riwbox WT-7S Bluetooth Headphones have a battery life of up to 6-10 hours, depending on usage and LED light settings.

Q: Can I use these headphones for phone calls?

A: Yes, the Riwbox WT-7S Bluetooth Headphones feature a built-in microphone for hands-free phone calls when connected to a compatible device.

Q: Are these headphones noise-canceling?

A: The Riwbox WT-7S Bluetooth Headphones do not have active noise-canceling technology. However, the over-ear design provides passive noise isolation.

Q: Are these headphones compatible with all Bluetooth devices?

A: The Riwbox WT-7S Bluetooth Headphones are compatible with most Bluetooth-enabled devices, including smartphones, tablets, and computers.

Product FAQ:

Q: What is the line cable used for?
A: The line cable is used so that the headphones can be used if the batteries die. They can plug in like standard headphones and not require a Bluetooth connection.

Q: Does it work with Android phones?
A: Yes, it works well with Android devices.

Q: Will the headphones connect to an iPad when the iPad is in airplane mode?
A: Yes, it comes with a connection cord so you can use it in any mode on the iPad. It works great.

Q: Can you adjust the volume on the headphones?
A: Yes, you can easily adjust the volume using the switches located at both sides of the headphone when using Bluetooth mode.

Q: Does this work with an Android tablet? I see it only mentions iPad and not Android.
A: Yes, it works well with Android devices.

Q: Will these headphones work for 6 and 7 year olds and does it play music all by itself?
A: It would be fine for a 6 or 7 year old. The headphones do not play music or anything by itself, they need to be connected to something playing music.

Q: Do these work with a Kindle?
A: We are not sure, but they work well with an iPad and other Android devices.

Q: Does it cancel background noise?
A: Yes, it has noise-cancelling technology to reduce background noise.

Q: Can these be used in the Philippines?
A: Yes, they can be used in the Philippines as long as there is a Bluetooth device to connect them to.