ATOKIT License Plate Frame Backup Camera User Manual

Table of Contents

1. Package Contents
2. Product Features
3. Installation Instructions
4. Troubleshooting Tips
5. Frequently Asked Questions (FAQs)

1. Package Contents

• ATOKIT License Plate Frame Backup Camera
• RCA Video Cable
• Power Cable
• Installation Screws
• User Manual

2. Product Features

• Heavy-duty license plate frame backup camera
• IP67 Waterproof and shockproof
• 170° wide viewing angle
• High-definition color images
• Night vision with 8 white LEDs
• Universal compatibility with various vehicles

3. Installation Instructions

1. Mount the ATOKIT License Plate Frame Backup Camera onto your vehicle's license plate using the provided screws.
2. Connect the power cable of the backup camera to the harness wires that connect to the backup light on the tail light assembly. The RED wire end is positive, while the BLACK one is negative.
3. Connect the RCA output end to the car monitor. Please ensure your monitor supports NTSC video system.
4. The camera switch is controlled by the reverse gear shift. When you put your vehicle in reverse, the backup camera will automatically turn on.
5. Take care of the sealing to prevent water leakage during installation.
6. Adjust the camera up and down for the desired view angle using a generic suitable tool.
7. If connecting this backup camera to a factory radio, a suited harness and programmer (not included) will be required for installation.
8. Apply electrical tape for the joint of the red power wires and RCA wires, and use zip ties to fasten the wire on your vehicle.

4. Troubleshooting Tips

• If the image is not showing on your monitor, ensure that the RCA output end is properly connected to the car monitor and that the monitor supports NTSC video system.
• If the image is blurry or unclear, clean the camera lens and ensure there is no obstruction or dirt on the lens.
• If the camera is not turning on when you put your vehicle in reverse, check the connections to the backup light on the tail light assembly and ensure the power cables are properly connected.
• If the camera is fogged or wet during rainy or stormy weather, ensure the sealing is properly done during installation to prevent water leakage.

5. Frequently Asked Questions (FAQs)

Q: Is this backup camera compatible with my vehicle?

A: The ATOKIT License Plate Frame Backup Camera is designed to be universally compatible with various vehicles like trucks, SUVs, RVs, and Mini-Vans. It can fit well with all years of Ford, Chevrolet Silverado, Dodge Ram, Chevrolet Colorado, GMC Sierra, Toyota Tacoma/Tundra, Nissan Frontier/Titan, and Honda Ridgeline.

Q: Can I use this backup camera with my factory radio?

A: Yes, you can use this backup camera with your factory radio. However, you will need a suited harness and programmer (not included) for installation. Different radios may require different harnesses and programmers.

Q: Is this a wired or wireless backup camera?

A: The ATOKIT License Plate Frame Backup Camera is a wired backup camera. It is not a wireless camera.

Q: Can I adjust the camera angle?

A: Yes, you can adjust the camera angle up and down using a generic suitable tool to achieve the desired view angle.

Q: How do I clean the camera lens?

A: To clean the camera lens, gently wipe it with a soft, clean cloth. Avoid using abrasive materials or chemicals that may damage the lens.

Q: Is this a wired or wireless backup camera?
A: This is a wired backup camera.

Q: Does the package include a monitor or display?
A: No, the package does not include a monitor or display.

Q: Is this backup camera compatible with all vehicles?
A: This HD rear view camera is compatible with different types of vehicles like trucks, SUVs, RVs, and mini-vans. It can also fit well with all years of Ford, Chevrolet Silverado, Dodge Ram, Chevrolet Colorado, GMC Sierra, Toyota Tacoma/Tundra, Nissan Frontier/Titan and Honda Ridgeline.

Q: Is this backup camera waterproof?
A: Yes, this license plate frame backup camera is IP67 waterproof and shockproof. It can work in stormy or rainy weather without getting fogged or wet.

Q: What is the viewing angle of this reversing camera?
A: This rear view backup camera has a 170° wide-angle view that offers you the largest viewing fields. It eliminates blind spots behind your car and makes it easy to check the environment behind the car.

Q: Does this backup camera have night vision capabilities?
A: Yes, this license plate frame backup camera has 8 bright LED lights that provide better night vision than other infrared cameras. The night vision feature provides realistic and comfortable images for night-time or dark space backing up.

Q: How do I install this backup camera?
A: The installation process is easy by reading the user manual provided in the package. Please connect the power cable of the backup camera to the harness wires that connect to the backup light on the tail light assembly. The camera switch is controlled by the reverse gear shift. Please take care of the sealing to prevent water leakage when installation.

Q: What video system does this backup camera support?
A: This camera only supports NTSC video systems, so please make sure your monitor supports NTSC video systems before purchasing.

Q: Does the package include a harness and programmer for connecting to a factory radio?
A: No, the package does not include a harness and programmer for connecting to a factory radio. Different radios require different harnesses and programmers, so you need to purchase one that is suitable for your radio.

Q: Is this backup camera rated IP67 or IP68?
A: This license plate frame backup camera is rated IP67.

Q: Can I use this camera as a front license plate sensor for parking?
A: This license plate frame backup camera is designed as a backup camera and may not be suitable for use as a front license plate sensor for parking.

Q: Can I power the camera to always be on, and the lights to come on with reverse?
A: This camera is designed to hook up to the reverse lights, so it may not be possible to power the camera always on and have the lights come on with reverse.

Q: How can I get a replacement cable if the metal piece broke off into the deck?
A: You need to contact the manufacturer for a replacement cable.

Q: Is this product easy to install?
A: Yes, this product is easy to install by following the user manual provided in the package. If you have any installation questions, you can contact their team for assistance.