Beam Electronics Car Phone Holder Mount User Manual

Table of Contents

1. Package Contents
2. Installation Instructions
3. How to Use
4. Troubleshooting Tips
5. Frequently Asked Questions

1. Package Contents

• Beam Electronics Car Phone Holder Mount
• Lock Washer
• Bi-directional Lever

2. Installation Instructions

1. Hold the car mount with your hands and unscrew the lock washer on the back. (Do not throw away this washer)
2. Place the circular ball on the lever through the lock washer.
3. Insert the ball into the slot in the back of the mount.
4. Tighten the lock washer back onto the mount.
5. The unit is now assembled.
6. Use the bi-directional lever to clamp the mount to your air vent. One way will be tighter than the other.
7. Adjust your mount to the desired position and you are ready to go!

3. How to Use

1. Simply open the sides with the button on the back of the mount and place your cell phone or device in the mount.
2. Close the sides to secure your phone in the mount.
3. Use the quick release button on the back to remove your device when needed.
4. Enjoy 360-degree rotation to find the best viewing angle for your device.

4. Troubleshooting Tips

• If the mount is not holding your device securely, ensure that the lock washer is tightened properly.
• If the mount is not attaching securely to your air vent, try adjusting the bi-directional lever for a tighter fit.
• Ensure that the mount is only used on horizontal or vertical vents, as it is not compatible with circular vents.

5. Frequently Asked Questions

Q: Is this mount compatible with my phone?

A: The Beam Electronics Car Phone Holder Mount is designed to fit most cellphones, with a width size between 1.9 inches to 3.7 inches. Compatible devices include iPhone 7, 7 Plus, 6s Plus, 6s, 5s, 5c, Samsung Galaxy S6, HTC, LG, Nexus, Nokia, and GPS devices.

Q: Can I use this mount with my phone case on?

A: Yes, you can keep your phone case on while using this mount. Simply adjust the side grips to accommodate the size of your phone with the case.

Q: How do I adjust the viewing angle of my device?

A: The mount features a 360-degree rotation, allowing you to adjust the viewing angle to your preference.

Q: Can I use this mount on a circular air vent?

A: No, this mount is designed specifically for horizontal or vertical vents and is not compatible with circular vents.

Q: What is the width range of phones that this car phone holder mount can hold?
A: This car phone holder mount can hold phones or devices with a width range of 1.9 to 3.7 inches.

Q: Can I keep my phone case on while using this mount?
A: Yes, you can keep your phone case on while using this mount.

Q: Does this mount have a quick release button technology?
A: Yes, this mount has a quick release button technology that allows you to easily insert and remove your phone.

Q: Is this mount designed for horizontal or vertical vents?
A: Yes, this mount is designed specifically for horizontal or vertical vents (Not compatible with circular vents).

Q: What types of phones are compatible with this mount?
A: This mount is compatible with iPhone X 8 8 Plus 7 7 Plus SE 6s 6 Plus 6 5s 5 4s 4 Samsung Galaxy S6 S5 S4 LG Nexus Sony Nokia&more.

Q: Does this mount rotate?
A: Yes, this mount provides a fully 360-degree rotation for the best viewing angle.

Q: Can I use this mount for GPS navigation while driving?
A: Yes, you can use this mount for GPS navigation while driving.

Q: Is it easy to install and remove phones from this mount?
A: Yes, it is easy to install and remove phones from this mount with its single-handed operation and simplistic installation.

Q: Will this mount fit a Galaxy S8 or OnePlus 6 in an Otterbox case?
A: It should fit a Galaxy S8 or OnePlus 6 in an Otterbox case as long as the width of the device is within the range of 1.9 to 3.7 inches.

Q: Can I turn my phone sideways to get a horizontal screen view with this mount?
A: Yes, you can turn your phone sideways for a horizontal screen view with this mount.

Q: Is this mount suitable for circular vents?
A: No, this mount is not advised to be used on circular vents. It performs best on horizontal and vertical vents only.

Q: Does this mount block the headphone jack of an iPhone SE?
A: The mount itself does not block the headphone jack of an iPhone SE, but it may depend on the overall thickness of your phone/case/pop socket.