RAAYOO L002 Reverse Backup Camera User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Installation
1. Flush Mount Installation
2. Bracket Mount Installation
4. Wiring and Configuration
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Thank you for purchasing the RAAYOO L002 Reverse Backup Camera. This camera is designed to provide you with a clear and wide view of your vehicle's rear, front, or side, ensuring safer driving and parking. With its 170-degree wide view angle, easy installation options, and customizable distance scale lines, this camera is a perfect solution for a variety of vehicles.

2. Package Contents

• RAAYOO L002 Camera
• Power Cable
• Video Cable
• Flush Mounting Accessories
• Bracket Mounting Accessories
• User Manual

3. Installation

The RAAYOO L002 Camera offers two installation options: Flush Mount and Bracket Mount. Choose the option that best suits your vehicle and preferences.

3.1 Flush Mount Installation

1. Choose a suitable location on your vehicle's bumper for the camera.
2. Using the included drilling bit, drill a hole in the chosen location.
3. Insert the camera into the hole and secure it using the provided flush mounting accessories.

3.2 Bracket Mount Installation

1. Choose a suitable location on your vehicle for the camera bracket.
2. Attach the bracket to the chosen location using the provided bracket mounting accessories.
3. Attach the camera to the bracket and adjust the angle for the best view.

4. Wiring and Configuration

1. Connect the power wire of the camera to your vehicle's reversing light (positive to reversing light+, negative to reversing light- or ground).
2. Connect the video cable of the camera to the head unit of your vehicle. Note: Ensure that your head unit supports RCA video input.
3. If your head unit has a reverse triggering wire, connect it to the red triggering wire on the extension cable.
4. Configure the camera's guidelines and image orientation by cutting the white and/or green wires as needed:
   • Keep both wires intact for a rear view camera with guidelines.
   • Cut the white wire for a rear view camera without guidelines.
   • Cut the green wire for a front/side view camera with guidelines.
   • Cut both wires for a front/side view camera without guidelines.
5. Power off the vehicle and power it back on to apply the changes.

5. Troubleshooting Tips

• If the camera is not displaying an image, check the power connections and ensure that the camera and monitor are receiving power.
• Ensure that the monitor supports RCA video input and is properly connected to the camera.
• If the camera is mounted upside down, the guidelines will also appear upside down. Rotate the camera to correct the installation orientation.
• For factory radios, a separate harness and programmer may be required for compatibility. Check your radio's specifications and requirements.

6. Frequently Asked Questions

Can this camera be used as a front view camera?

Yes, the RAAYOO L002 Camera can be used as a front, side, or rear view camera. To configure it as a front view camera, cut the green wire and follow the installation instructions.

Does the camera work with factory radios?

The camera is compatible with factory radios that support RCA video input. However, you may need to purchase a separate harness and programmer for compatibility. Check your radio's specifications and requirements.

What is the camera's working voltage?

The RAAYOO L002 Camera has a working voltage of 12V. Ensure that your vehicle's power supply is compatible before installation.

Can I disable the guidelines on the camera?

Yes, you can disable the guidelines by cutting the white wire. Refer to the wiring and configuration section for more details.

What is the camera's viewing angle?

The RAAYOO L002 Camera has a wide viewing angle of 170 degrees, providing a clear and extensive view of your vehicle's surroundings.

Q: How many times have you been backing out of your driveway or a parking spot only to have a little kid dart behind your automobile, seemingly out of nowhere?
A: The RAAYOO L002 HD 170 Degree Wide View Angle Universal Car Front/Side/Rear View Camera is a perfect solution to this problem. It provides eyes in the back of your head.

Q: What are the installation options for this camera?
A: There are two installation options for this camera: bracket mounting or flush mounting, depending on your case.

Q: Can this camera be used as both a rear view and front/side view camera?
A: Yes, it is switchable between rear view backup camera and front/side view camera. By default, it is a reverse camera (mirror image) with distance scale lines.

Q: What is the viewing angle of this camera?
A: This camera has a wide 170 degree viewing angle to help you see blind areas where your eyes can't reach.

Q: What type of displays does this camera work with?
A: This camera works with head units or aftermarket LCD/TFT displays with standard RCA input only. It is suitable for a variety of vehicles such as cars, mini-trucks, and mini-vans. It operates on 12V working voltage only and supports NTSC only.

Q: Does this product come with a warranty?
A: Yes, there is a 1-year warranty on this product along with friendly customer service. Additionally, there is a 30-day money-back guarantee.

Q: What is included in the package?
A: The package includes the RAAYOO front/side/rear camera, flush mount hole drill, mount bracket, screws, DC power cable (1.5m/4.5ft), video cable (6m/18ft), and user manual.

Q: Is this a color camera?
A: Yes, this is a color camera and not black and white.

Q: How do you change the mirrored view?
A: This camera is a rear view camera with distance scale lines as the default set for backing up. To use it as a front camera, you would need to cut the green looped wire. To cancel the parking guide lines, cut the white looped wire. Cut the green cable to switch from mirror (rear view) to normal image (front view). Cut the white cable to cancel parking guide lines. Please note that after cutting either the white or green wire, you need to power off the vehicle and power on again to convert the image successfully.