Belkin Ultra HD High Speed HDMI 2.1 Cable User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Compatibility
4. Installation
5. Troubleshooting Tips
6. Frequently Asked Questions (FAQ)

1. Introduction

The Belkin Ultra HD High Speed HDMI 2.1 Cable is designed to provide optimal viewing experiences for your Apple TV, Apple TV 4K, streaming devices, HDTVs, gaming consoles, Blu-ray players, projectors, and more. This cable supports the highest resolutions, refresh rates, and most immersive viewing experience available, including compatibility with Dolby Vision.

2. Package Contents

• Belkin Ultra HD High Speed HDMI 2.1 Cable (2 M/6.ft)

3. Compatibility

This cable is compatible with the following devices:

• Apple TV / Apple TV 4K
• Streaming Devices
• HDTVs
• Gaming Consoles
• Blu-ray Players
• Projectors
• And more

4. Installation

1. Turn off all devices that you will be connecting with the Belkin Ultra HD High Speed HDMI 2.1 Cable.
2. Identify the HDMI ports on your devices. These ports are typically labeled "HDMI" and are found on the backs or sides of devices.
3. Connect one end of the Belkin Ultra HD High Speed HDMI 2.1 Cable to the HDMI port on your source device (e.g., Apple TV, gaming console, Blu-ray player).
4. Connect the other end of the cable to the HDMI port on your display device (e.g., HDTV, projector).
5. Turn on all connected devices.
6. Select the appropriate HDMI input on your display device using its remote control or built-in controls.
7. Adjust your source device's settings, if necessary, to output the desired resolution and refresh rate.

5. Troubleshooting Tips

• Ensure that both ends of the Belkin Ultra HD High Speed HDMI 2.1 Cable are securely connected to the HDMI ports on your devices.
• Check that your devices are powered on and set to the correct HDMI input.
• Try a different HDMI port on your display device, if available.
• Verify that your devices support the desired resolution and refresh rate.
• Test the cable with another compatible device to ensure it is functioning properly.
• Perform a factory reset on your devices, if necessary, to clear any potential software issues.

6. Frequently Asked Questions (FAQ)

Q: What is the difference between this cable and a standard HDMI cable?

A: The Belkin Ultra HD High Speed HDMI 2.1 Cable supports a bandwidth of up to 48 Gbps, which is significantly higher than the 18 Gbps supported by standard HDMI cables. This increased bandwidth allows for higher resolutions, refresh rates, and compatibility with Dolby Vision.

Q: Is this cable compatible with my gaming console or streaming device?

A: The Belkin Ultra HD High Speed HDMI 2.1 Cable is compatible with a wide range of devices, including gaming consoles like the Sony PlayStation 5 (PS5), Microsoft Xbox Series X, and streaming devices like the Apple TV 4K. Ensure that your device has an HDMI port for proper connection.

Q: Can I use this cable for longer distances?

A: This cable is designed to provide optimal performance at a length of 2 meters (6.6 feet). For longer distances, you may need to consider using a fiber optic HDMI cable or an HDMI extender.

Q: Does this cable support HDR and Dolby Vision?

A: Yes, the Belkin Ultra HD High Speed HDMI 2.1 Cable supports 4K HDR (Dolby Vision and HDR 10) for an enhanced viewing experience.

Q: Can I use this cable with my laptop or computer?

A: Yes, as long as your laptop or computer has an HDMI port, you can use the Belkin Ultra HD High Speed HDMI 2.1 Cable to connect it to your HDTV or projector for optimal viewing.

Q: What devices is the Belkin Ultra HD High Speed HDMI 2.1 Cable compatible with?

A: The Belkin Ultra HD High Speed HDMI 2.1 Cable is compatible with a range of devices including Apple TV, Apple TV 4K, streaming devices, HDTVs, gaming consoles, Blu-ray players, projectors and more.

Q: What is Dolby Vision and does this cable support it?

A: Dolby Vision is an advanced high dynamic range technology that offers unmatched brightness, contrast and color. This cable supports Dolby Vision for the ultimate viewing experience.

Q: Is this cable HDMI 2.1 certified?

A: Yes, this cable is HDMI 2.1 certified by an authorized testing center (Forum ATC).

Q: What are the key features and benefits of this cable?

A: The key features and benefits of this cable include compatibility with a range of devices, support for Dolby Vision and 4K HDR (Dolby Vision and HDR 10), optimal bandwidth and speeds for gaming, streaming, and HDTV, durable 2-layer shielding construction to minimize interference, and a length of 2 meters which is ideal for connecting to UHDTVs.

Q: Does this cable support HDCP 2.2 or higher?

A: Yes, this cable supports HDCP 2.2 but it ultimately depends on whether the source and sink are HDCP 2.0/2.2 compliant.

Q: Can I use this cable with my Roku Ultra?

A: While it hasn't been tested with the Roku Ultra specifically, this cable is perfect to use with UHD Blu-ray players to your TV and other HDMI devices.

Q: Is this cable ideal for my Apple TV 4K?

A: Yes, this cable is perfect for your Apple TV 4K as it supports Dolby Vision and 4K HDR (Dolby Vision and HDR 10).

Q: Does this cable come with the technology eARC?

A: Yes, this cable is compatible with the technology eARC.

Q: Is this cable the same as the one Apple sells for $29.99?

A: Yes, this is the exact same cable that Apple sells for $29.99.

Q: What is the length of this cable?

A: The length of this cable is 6.6 ft / 2 meters.

Q: What is the weight and dimensions of this product?

A: The product dimensions are 5.87 x 2.61 x 0.85 inches and it weighs 3.52 ounces.

Q: Are there any customer reviews for this product?

A: Yes, there are over 4,996 customer reviews on Amazon with an average rating of 4.7 out of 5 stars. Customers have reported that this cable works when other cables won't and provides an amazing viewing experience.