Godox Xpro-C TTL Wireless Flash Trigger for Canon User Manual

Introduction

The Godox Xpro-C TTL Wireless Flash Trigger is designed for Canon cameras and is compatible with various Godox flashes, outdoor flashes, and studio flashes. This user manual will guide you through the setup, operation, and troubleshooting of your new flash trigger.

Package Contents

• 1x Xpro-C trigger for Canon
• 1x Detailed instructions
• 1x Pegear Cleaning kit

Features

• TTL Autoflash, Multi Flash, Manual Flash
• 1/8000s High-Speed Sync
• Flash Exposure Compensation
• One-Shoot & Multi-Shoot Setting
• TTL-Convert-Manual Function
• 01-99 Wireless ID, Avoid Signal Interference effectively
• 16 Groups and 32 Channels to Wirelessly Control and Trigger
• Large Dot Matrix LCD, Full Graphic Display of 5 Groups simultaneously
• FE lock
• 11 Customizable Functions
• Manual Flash 1/1 - 1/256 Power
• Modeling Light Status Control
• Adjusts the Flash Zoom Coverage for Each Group
• Selective Transmission of Data Conserves Energy and Battery Life
• Magnification Function Displays Details of Each Group Settings
• Global Adjustments to Exposure Values for Multi-Group in M Mode
• 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation
• Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack

Setting Up Your Godox Xpro-C TTL Wireless Flash Trigger

1. Insert two AA batteries (not included) into the battery compartment on the back of the trigger.
2. Mount the Xpro-C trigger onto your Canon camera's hot shoe.
3. Turn on your camera and the Xpro-C trigger by pressing and holding the power button on the trigger for 2 seconds.
4. Set up your Godox flashes, outdoor flashes, or studio flashes according to their respective user manuals and ensure they are in the correct wireless mode to communicate with the Xpro-C trigger.
5. On the Xpro-C trigger, press the "Gr/Ch" button to set the desired group and channel for your flashes. Make sure the group and channel settings on your flashes match the settings on the trigger.

Operating Your Godox Xpro-C TTL Wireless Flash Trigger

1. Press the "Mode" button to switch between TTL, Manual, and Multi flash modes.
2. Use the group buttons (A, B, C, D, E) to select the group you want to adjust.
3. Turn the dial to adjust the flash output, zoom, or other settings for the selected group.
4. Press the "TCM" button to convert the flash value in TTL mode into the power output value in Manual mode.
5. Press the "Test" button to test fire your flashes and ensure they are properly synced with the trigger.
6. Take your photos, and the Xpro-C trigger will wirelessly control and trigger your flashes according to your settings.

Troubleshooting Tips

• If your flashes are not firing, make sure the group and channel settings on the trigger match the settings on your flashes.
• Ensure your flashes are in the correct wireless mode to communicate with the Xpro-C trigger.
• If your flashes still do not fire, try adjusting the wireless ID on the trigger and flashes to avoid signal interference.
• Make sure your camera and the Xpro-C trigger are both turned on and the trigger is securely mounted on your camera's hot shoe.
• Check the battery level on the trigger and replace the batteries if necessary.
• If you are experiencing non-triggering issues when your camera is too close to your flashes, try adjusting the settings in the trigger's menu to resolve the issue.
• For any other issues, consult the detailed instructions included in the package or contact the manufacturer for assistance.

Frequently Asked Questions

Can I use the Xpro-C trigger with non-Canon flashes?

The Xpro-C trigger is designed to work with Godox flashes, outdoor flashes, and studio flashes. Some non-Canon flashes may be compatible, but it is recommended to check with the manufacturer for compatibility before purchasing.

Do I need to purchase additional receivers for my flashes?

For certain flash models, you may need to purchase additional receivers, such as the X1R-C, XTR-16, or XTR-16S, to enable wireless communication with the Xpro-C trigger. Check the compatibility list in the product description for more information.

Can I use the Xpro-C trigger with multiple flashes simultaneously?

Yes, the Xpro-C trigger can control and trigger up to 16 groups and 32 channels simultaneously, allowing you to use multiple flashes in various configurations.

How do I update the firmware on my Xpro-C trigger?

The Xpro-C trigger supports Type-C USB firmware upgrades. Connect the trigger to your computer using a Type-C USB cable and follow the manufacturer's instructions for updating the firmware.

What is the wireless range of the Xpro-C trigger?

The Xpro-C trigger has a wireless range of up to 100 meters (328 feet) in an open area without interference.

Q: What are the features of the Godox Xpro-C TTL Wireless Flash Trigger for Canon?
A: The Godox Xpro-C TTL Wireless Flash Trigger for Canon has the following features: TTL Autoflash, Multi Flash, Manual Flash, 1/8000s High-Speed Sync, Flash Exposure Compensation, One-Shoot & Multi- Shoot Setting, TTL-Convert-Manual Function, 01-99 WIRELESS ID, 16 Groups and 32 Channels to Wirelessly Control and Trigger, Large Dot Matrix LCD, Full Graphic Display of 5 Groups simultaneously, FE lock, 11 Customizable Functions, Manual Flash 1/1 - 1/256 Power, Modeling Light Status Control, Adjusts the Flash Zoom Coverage for Each Group, Selective Transmission of Data Conserves Energy and Battery Life, Magnification Function Displays Details of Each Group Settings, Global Adjustments to Exposure Values for Multi-Group in M Mode, 5 Group Buttons and 4 Function Buttons Offer Convenient Manipulation, Support Type-C USB Firmware Upgrade and Wireless Triggering by 2.5mm Sync Cord Jack.

Q: What is the function of the TCM button on the Godox Xpro-C TTL Wireless Flash Trigger for Canon?
A: The TCM button on the Godox Xpro-C TTL Wireless Flash Trigger for Canon can transform the flash value in TTL mode into the power output value in M mode when long-pressed. When short-pressed, it enables the groups to be switched between one-group and multi-group mode.

Q: What are the versatile using methods of the Godox Xpro-C TTL Wireless Flash Trigger for Canon?
A: The Godox Xpro-C TTL Wireless Flash Trigger for Canon can be used as a wireless Godox Flash Trigger/Wireless Shutter Release Trigger/Wireless Canon Speedlights Trigger/Flash Trigger with 2.5mm Sync Cord Jack.

Q: What is the purpose of the 01-99 WIRELESS ID feature on the Godox Xpro-C TTL Wireless Flash Trigger for Canon?
A: The 01-99 WIRELESS ID feature on the Godox Xpro-C TTL Wireless Flash Trigger for Canon is used to achieve triggering only when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.

Q: What is the display of the Godox Xpro-C TTL Wireless Flash Trigger for Canon?
A: The Godox Xpro-C TTL Wireless Flash Trigger for Canon has a large dot matrix LCD that can display 16 groups and 32 channels to wirelessly control and trigger. It has a full graphic display of 5 groups simultaneously.

Q: What is included in the package contents of the Godox Xpro-C TTL Wireless Flash Trigger for Canon?
A: The package contents of the Godox Xpro-C TTL Wireless Flash Trigger for Canon include one Xpro-c trigger for Cannon, detailed instructions, and a Pegear Cleaning kit.

Q: Is this compatible with Canon EOS Rebel T7i?
A: Yes, it is compatible with Canon EOS Rebel T7i as long as it has a hot shoe flash on top of the camera.

Q: Does this use AA or AAA batteries or is it built-in battery?
A: The Godox Xpro-C TTL Wireless Flash Trigger for Canon uses 2 AA batteries.