DemerBox DB2 Waterproof, Portable, and Rugged Outdoor Bluetooth Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Device Overview
4. Getting Started
5. Pairing with Bluetooth Devices
6. Multi-Pairing Party Mode
7. Using the USB Charging Port
8. Audio Input
9. Maintenance & Care
10. Troubleshooting
11. Frequently Asked Questions

1. Introduction

Welcome to your new DemerBox DB2 Waterproof, Portable, and Rugged Outdoor Bluetooth Speaker! This powerful and durable speaker is designed to provide you with high-quality sound and long-lasting battery life for all of your outdoor adventures. Please read this user manual carefully before using your DemerBox DB2 to ensure proper setup and operation.

2. Package Contents

• DemerBox DB2 Speaker
• A/C Charger (100-220v input, DC 12.6v@1A output, center positive)
• 3.5mm Stereo Cable (1 meter long)
• Port Plug
• Quick Start Guide

3. Device Overview

• Size: 10.62” x 9.68” x 6.87” (27 x 25 x 18 cm)
• Weight: 5.44 lbs (3.37 kg)
• Case: USA made military spec Pelican 1300 case
• Speaker: Two 3 inch, 8ohm, aluminum cone with rubber surround drivers
• Audio Power: 94db@1ft. 11w per channel RMS. Class D audio circuitry
• Bluetooth: 100 feet (30 meter) range
• Audio Input: 3.5mm audio jack in addition to Bluetooth
• Battery: 2600mAh Lithium Ion @12.6v. 40+ hours play time between charges
• Charge Time: Approximately 4 hours to full when battery is depleted

4. Getting Started

1. Charge your DemerBox DB2 using the included A/C charger. Connect the charger to a power source and plug it into the charging port on the speaker. The charging indicator will light up, and it will take approximately 4 hours to fully charge the speaker.
2. Install the included Port Plug to make your DemerBox waterproof. Simply insert the plug into the port opening and press firmly until it is securely in place.

5. Pairing with Bluetooth Devices

1. Turn on your DemerBox DB2 by flipping the power switch to the ON position.
2. Enable Bluetooth on your device (smartphone, tablet, etc.) and search for available devices.
3. Select "DemerBox DB2" from the list of available devices to initiate the pairing process.
4. Once connected, you can play music from your device through the DemerBox DB2 speaker.

6. Multi-Pairing Party Mode

To create an outdoor sound system, you can pair multiple DemerBox speakers together. Follow these steps:

1. Pair your first DemerBox DB2 with your Bluetooth device as described in section 5.
2. Turn on the second DemerBox DB2 and place it within range of the first speaker.
3. Press and hold the multi-pairing button on both speakers for 3 seconds. The speakers will automatically connect to each other.
4. Repeat this process for any additional DemerBox speakers you wish to connect.

7. Using the USB Charging Port

Your DemerBox DB2 features an internal USB charging port that can be used to charge your devices. To use this feature, follow these steps:

1. Open the DemerBox by releasing the latches and lifting the lid.
2. Connect your device to the USB charging port using a compatible USB cable.
3. Close the DemerBox, ensuring that the cable does not obstruct the seal. Your device will now charge while you play music.

8. Audio Input

In addition to Bluetooth, your DemerBox DB2 also features a 3.5mm audio input for wired connections. To use this feature, follow these steps:

1. Connect one end of the included 3.5mm stereo cable to the audio input on your DemerBox DB2.
2. Connect the other end of the cable to the headphone or audio output on your device (smartphone, tablet, etc.).
3. Play music from your device, and the sound will be transmitted through the DemerBox DB2 speaker.

9. Maintenance & Care

To ensure the longevity of your DemerBox DB2, follow these maintenance and care tips:

• Keep the speaker clean and free of debris.
• Store the speaker in a cool, dry place when not in use.
• Do not expose the speaker to extreme temperatures or prolonged direct sunlight.
• Charge the speaker regularly to maintain battery life.

10. Troubleshooting

1. Problem: DemerBox DB2 won't turn on.
   • Solution: Ensure the speaker is fully charged and the power switch is in the ON position.
2. Problem: DemerBox DB2 won't pair with Bluetooth device.
   • Solution: Make sure your device's Bluetooth is enabled and the speaker is within range (100 feet/30 meters). If the problem persists, try resetting the Bluetooth connection by turning off the speaker and your device, then turning them back on and attempting to pair again.
3. Problem: Sound quality is poor or distorted.
   • Solution: Check the audio source and ensure it is playing at an appropriate volume. If the problem persists, try adjusting the volume on your device or the DemerBox DB2.
4. Problem: USB charging port is not working.
   • Solution: Ensure the DemerBox DB2 is turned on and has sufficient battery life. Check the USB cable and device for any damage or compatibility issues. If the problem persists, contact DemerBox customer support for assistance.

11. Frequently Asked Questions

1. Question: How long does the battery last on the DemerBox DB2?
   • Answer: The DemerBox DB2 has a battery life of up to 40 hours, depending on audio volume, ambient temperature, charging habits, and USB charge port usage.
2. Question: Can I use the DemerBox DB2 to charge my phone or other devices?
   • Answer: Yes, the DemerBox DB2 has an internal USB charging port that can be used to charge your devices. Simply connect your device using a compatible USB cable.
3. Question: Is the DemerBox DB2 waterproof?
   • Answer: Yes, the DemerBox DB2 is waterproof when the included Port Plug is installed. It is designed to withstand water, rain, hail, dirt, sand, heat, and snow.
4. Question: Can I connect multiple DemerBox speakers together?
   • Answer: Yes, you can pair multiple DemerBox speakers together using the multi-pairing feature to create an outdoor sound system.
5. Question: Is the DemerBox DB2 compatible with all Bluetooth devices

Product FAQ:

Q: How long does the DemerBox battery last?
A: The DemerBox lasts an incredible 40 hours between charges. However, battery life depends on audio volume, ambient temperature, charging habits & USB charge port usage.

Q: Is the DemerBox waterproof?
A: Yes, the DemerBox is waterproof and includes a Port Plug that installs quickly to become fully waterproof. Every DemerBox is a waterproof case that opens to keep valuable items like your wallet, keys and phone safe and dry inside.

Q: Can I pair multiple DemerBox speakers together?
A: Yes, you can pair multiple DemerBox speakers around your pool to create an outdoor sound system.

Q: Is the DemerBox built to last?
A: Yes, the DemerBox is a fully serviceable speaker designed with sustainability in mind. In the unlikely event there's an issue, DemerBox can fix it.

Q: Where is the DemerBox manufactured?
A: Every DemerBox is proudly hand built in the USA.

Q: How loud is the DemerBox?
A: The DemerBox has a professional-grade sound that excels, providing loud sound for your outdoor adventures. It has an audio power of 94db@1ft and 11w per channel RMS.

Q: What is included with the DemerBox?
A: The DemerBox comes with an A/C Charger (100-220v input, DC 12.6v@1A output, center positive), 3.5mm stereo cable (1 meter long), Port Plug, and Quick Start Guide.

Q: Can I recharge the DemerBox with a power pack?
A: Yes, as long as the power pack has a DC 12.6v@1A output (center positive).

Q: What is the weight and dimensions of the DemerBox?
A: The DemerBox weighs 5.4 pounds and has dimensions of 10 x 7 x 10.5 inches.

Q: What is the waterproof rating of the DemerBox?
A: The DemerBox has a removable plug that will make it 100% waterproof when installed.

Q: Is the case of the DemerBox a genuine Pelican case?
A: Yes, it is a genuine Pelican 1300 case, made in the USA.