Linksys RE9000 AC3000 Tri-Band Wi-Fi Extender User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Getting Started
4. Setting Up the Wi-Fi Extender
5. Access Point Mode
6. Seamless Roaming
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Introduction

The Linksys RE9000 AC3000 Tri-Band Wi-Fi Extender is designed to boost your Wi-Fi signal and eliminate dead zones, providing seamless Wi-Fi connectivity throughout your home. With its tri-band technology, the RE9000 delivers speeds up to 3x faster than dual-band extenders. This user manual will guide you through the setup process and provide troubleshooting tips and frequently asked questions.

2. Package Contents

• Linksys MAX-STREAM Tri-Band AC3000 Wi-Fi Range Extender (RE9000)
• Quick install guide
• Regulatory information

3. Getting Started

Before setting up your Wi-Fi extender, ensure that your Wi-Fi router is turned on and functioning properly. The RE9000 is compatible with all Wi-Fi routers, including those from Internet Service Providers.

4. Setting Up the Wi-Fi Extender

1. Plug the RE9000 into a power outlet close to your Wi-Fi router.
2. Wait for the LED light on the front of the extender to flash orange.
3. On your computer or mobile device, go to your Wi-Fi settings and connect to the "Linksys Extender Setup" network.
4. Open a web browser and type "http://extender.linksys.com" in the address bar.
5. Follow the on-screen instructions to complete the setup process. The extender will automatically detect and connect to your Wi-Fi router.
6. Once the setup is complete, the LED light on the front of the extender will turn solid green.
7. Unplug the extender and move it to the desired location in your home. Plug it back in, and it will automatically connect to your Wi-Fi network.

5. Access Point Mode

If you want to use the RE9000 as an access point, connect it to your router or cable gateway using a Gigabit Ethernet cable. This will extend your home network and reduce dead spots by adding Wi-Fi capabilities to your wired network.

6. Seamless Roaming

For the best Wi-Fi experience, pair the RE9000 with a Linksys MAX-STREAM router. This will enable Seamless Roaming, allowing your devices to automatically switch to the strongest Wi-Fi signal as you move throughout your home.

7. Troubleshooting Tips

• If the extender is not connecting to your Wi-Fi router, try moving it closer to the router and ensure that it is within range.
• Ensure that your Wi-Fi router is functioning properly and has an active internet connection.
• If you are experiencing slow Wi-Fi speeds, try resetting the extender and going through the setup process again.
• For optimal performance, place the extender in an open area with minimal interference from other electronic devices.

8. Frequently Asked Questions

1. Q: Can I use the RE9000 with any Wi-Fi router?
   A: Yes, the RE9000 is compatible with all Wi-Fi routers, including those from Internet Service Providers.
2. Q: How do I reset the Wi-Fi extender?
   A: Press and hold the reset button on the side of the extender for 10 seconds. The LED light will flash and the extender will reboot.
3. Q: Can I use multiple RE9000 extenders in my home?
   A: Yes, you can use multiple extenders to further extend your Wi-Fi coverage. However, it is recommended to use Seamless Roaming with a Linksys MAX-STREAM router for the best experience.
4. Q: How do I update the firmware on my RE9000?
   A: The RE9000 will automatically receive firmware updates from Linksys as they are released, ensuring your extender is always up to date.

Q: What is the Linksys RE9000?
A: The Linksys RE9000 is a tri-band Wi-Fi range extender that boosts your Wi-Fi signal to eliminate dead zones and increase Wi-Fi coverage in hard-to-reach areas of your home.

Q: What are the benefits of using the Linksys RE9000?
A: The Linksys RE9000 offers tri-band AC3000 technology, which delivers three times the speed of dual-band extenders. It also supports multiple users with Next-Gen AC (MU-MIMO) and features Seamless Roaming for smooth Wi-Fi connections throughout your home. Additionally, it works with all Wi-Fi routers and has easy setup with Spot Finder and Push Button Connect.

Q: What is the range of the Linksys RE9000?
A: The Linksys RE9000 has a range of up to 10,000 square feet.

Q: Does the Linksys RE9000 reduce Wi-Fi speed?
A: According to customer reviews, there is no noticeable reduction in speed when using the Linksys RE9000.

Q: Can I use the Linksys RE9000 as an access point?
A: Yes, you can configure the Linksys RE9000 to act as an AC Wi-Fi access point to extend your home network and reduce dead spots by adding Wi-Fi capabilities to your wired network.

Q: Is the Linksys RE9000 compatible with all Wi-Fi routers?
A: Yes, the Linksys RE9000 is compatible with all Wi-Fi routers, including those from Internet Service Providers.

Q: Does the Linksys RE9000 have a WPS button for syncing to a router?
A: Yes, the Linksys RE9000 has a WPS button for easy syncing with your router.

Q: Where is the Linksys RE9000 manufactured?
A: The Linksys RE9000 is manufactured in Taiwan and assembled and designed in the US.