DIRECTV RC73 IR/RF Remote Control User Manual

Table of Contents

1. Getting Started
2. Inserting Batteries
3. Pairing with DIRECTV Receiver
4. Programming for TV Control
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Getting Started

Before using the DIRECTV RC73 IR/RF Remote Control, ensure that you have the following items:

• 2 AA batteries (included)
• DIRECTV receiver
• Compatible TV

2. Inserting Batteries

To insert the batteries into your RC73 remote control, follow these steps:

1. Turn the remote control over to reveal the battery compartment on the back.
2. Slide the battery cover off by pressing the tab and pulling it away from the remote.
3. Insert the 2 AA batteries, making sure to match the polarity (+ and -) as indicated inside the battery compartment.
4. Replace the battery cover by sliding it back into place until it clicks.

3. Pairing with DIRECTV Receiver

To pair your RC73 remote control with your DIRECTV receiver, follow these steps:

1. Turn on your DIRECTV receiver and TV.
2. Press and hold the "Mute" and "Enter" buttons on the remote simultaneously until the green light at the top of the remote flashes twice.
3. The remote should now be paired with your DIRECTV receiver. Test the remote by pressing the "Guide" button to bring up the on-screen guide.

4. Programming for TV Control

To program your RC73 remote control to control your TV, follow these steps:

1. Turn on your TV.
2. Press and hold the "Mute" and "Select" buttons on the remote simultaneously until the green light at the top of the remote flashes twice.
3. Enter the 5-digit code for your TV brand. If you don't know the code, you can find it using the DIRECTV remote code lookup tool.
4. The green light will flash twice if the code is entered correctly.
5. Test the remote by pressing the "Volume Up" button to see if it controls your TV's volume. If it works, the setup is complete.

5. Troubleshooting Tips

If you encounter any issues with your RC73 remote control, try the following troubleshooting tips:

• Check the batteries and replace them if necessary.
• Make sure the remote is in DIRECTV mode by pressing the "Mode" button until the green light at the top of the remote flashes twice.
• Reset the remote by pressing and holding the "Mute" and "Select" buttons simultaneously until the green light flashes twice, then re-pair the remote with your DIRECTV receiver and reprogram it for your TV.
• If the remote still does not work, contact DIRECTV customer support for further assistance or a possible replacement.

6. Frequently Asked Questions

Q: Can I use this remote with other devices besides my DIRECTV receiver and TV?

A: The RC73 remote control is designed specifically for use with DIRECTV receivers and compatible TVs. It may not work with other devices.

Q: How do I know if my TV is compatible with the RC73 remote control?

A: Most TVs are compatible with the RC73 remote control. To check your TV's compatibility, refer to the DIRECTV remote code lookup tool.

Q: Can I use this remote with older DIRECTV receivers?

A: The RC73 remote control is compatible with most DIRECTV receivers. However, some older models may not be compatible. Check your receiver's user manual or contact DIRECTV customer support for compatibility information.

Q: The battery cover on my remote keeps falling off. What can I do?

A: If the battery cover on your RC73 remote control does not stay in place, you may need to replace the remote. Contact DIRECTV customer support for assistance.

Q: What is the power source type for the DIRECTV 4336303112 2 Pack - RC73 IR/RF Remote Control?
A: The power source type for this remote control is corded electric.

Q: What are the connectivity technologies supported by this remote control?
A: The DIRECTV 4336303112 2 Pack - RC73 IR/RF Remote Control supports both infrared and radio frequency connectivity technologies.

Q: Are there programming codes included with this remote control?
A: No, programming codes are not included with this remote control. However, you can find the code for your particular TV online and enter it to program your remote control.

Q: What is the return policy for this product?
A: This product comes with Amazon assurance, which means you have 30 days to return it if it doesn't work. Just call customer service for assistance.

Q: Will this remote control work with a D12-100 receiver?
A: No, the D12-100 receiver requires an RC6X remote control.

Q: Does this product come with instructions for programming to operate a DVR?
A: Yes, instructions are included with this remote control. However, you can also find tutorials on YouTube that may be helpful.

Q: Is this remote control good for a DirecTV Deco LHR 26?
A: Yes, this remote control is very functional and should work well with a DirecTV Deco LHR 26.

Q: Do these remotes come with backlit keys?
A: No, these remotes do not have backlit keys.

Q: How do I get this remote to also turn on my TV?
A: You may need to find the code for your particular TV online and enter it to program your remote. Once programmed, you should be able to turn on both your cable box and TV with the press of a single button.

Q: Are these remotes easy to set up?
A: Yes, these remotes are easy to set up. Just follow the instructions provided with the remote and you should be able to program it for use with your TV and cable box.