User Manual for Beikell Car Phone Holder

Product Overview

The Beikell Car Phone Holder is designed to securely hold smartphones and GPS devices ranging from 4.7 to 6.7 inches in size. It features a highly adhesive suction cup, an adjustable telescopic arm, 360° rotation capability, easy one-hand operation, and a quick-release button. Made from heat-resistant PC material and silicone arms, it ensures durability and full protection for your device.

Installation Instructions

1. Clean the surface where you plan to mount the holder (dashboard or windshield) to ensure it is free from dust and dirt.
2. Remove the protective film from the suction cup.
3. Press the suction cup firmly against the cleaned surface.
4. Push down the locking lever to create a vacuum and secure the holder in place.
5. Attach the phone cradle to the telescopic arm by connecting it to the ball joint and tightening the screw to secure it.
6. Adjust the telescopic arm to the desired length and angle.
7. Press the quick-release button on the side to open the arms of the cradle.
8. Place your phone between the arms and squeeze them together to secure your device.
9. Make any final adjustments to the angle of the phone cradle for optimal viewing.

Troubleshooting Tips

Suction Cup Won't Stick

Clean both the suction cup and surface with a damp cloth. Dry thoroughly before attempting to stick it again. Ensure the locking lever is fully pressed down.

Phone Holder Vibrates or Moves

Tighten the screw at the ball joint to secure the phone cradle. Shorten the telescopic arm to reduce the distance from the windshield or dashboard.

Quick-Release Button is Stiff

Ensure no debris is obstructing the button. Apply a small amount of silicone lubricant if necessary.

Device Doesn't Fit

Make sure to adjust the width of the arms to accommodate your device. The holder is compatible with devices of 4.7-6.7 inches.

Frequently Asked Questions (FAQs)

How do I clean the sticky gel on the suction cup?

To clean the suction cup, rinse it under warm water and let it air dry. Do not use any cleaning agents as they might degrade the adhesive quality.

Can I use this holder on a textured dashboard?

Yes, the suction cup is designed to adhere to both smooth and textured surfaces. However, for best results, use it on as smooth a surface as possible.

Is the holder compatible with my device?

The Beikell Car Phone Holder is compatible with most smartphones and GPS devices that are 4.7-6.7 inches in size.

How do I prevent the holder from falling off in hot weather?

During high temperatures, the suction cup may lose some adhesion. Regularly clean the cup and surface, and reapply the holder to ensure a strong bond.

What should I do if the holder is too loose or too tight?

If the holder is too loose or too tight, adjust the telescopic arm and the ball joint screw to find the perfect balance and stability for your device.

Can I charge my phone while it's in the holder?

Yes, the holder has a reserved port allowing you to connect a charging cable to your phone while it's mounted.

What to do if the arms won't hold the device securely?

If the arms do not hold your device securely, ensure that you have squeezed them firmly against your device. If the problem persists, check for any obstructions or damage to the arms.

Is the product durable?

Yes, the Beikell Car Phone Holder is made from heat-resistant PC material and silicone, designed for durability and longevity.

How do I adjust the viewing angle?

You can adjust the viewing angle by rotating the phone cradle on the ball joint to your preferred position and then tightening the screw to secure it in place.

How long is the warranty period?

The Beikell Car Phone Holder comes with a 5-year availability for spare parts.

If you have any further questions or require additional support, please refer to the contact information provided with your product packaging.

Q: What is the Beikell Support Téléphone Voiture used for?
A: The Beikell Support Téléphone Voiture is a universal car phone mount that can be easily attached to the dashboard or windshield of your car. It is designed to securely hold smartphones and GPS devices ranging from 4.7 to 6.7 inches in size.

Q: How does the ventouse (suction cup) work?
A: The ventouse on the Beikell Support Téléphone Voiture is ultra sticky and can be easily attached to smooth or textured surfaces such as the dashboard or windshield. It can be removed without leaving any marks by simply pulling on the suction cup.

Q: Is the arm adjustable?
A: Yes, the telescopic arm of the Beikell Support Téléphone Voiture can be extended from 13.5cm (5.3in) to 19.4cm (7.6in) to find the most suitable height for your phone. This helps prevent blocking your view while driving.

Q: Can the mount rotate?
A: Yes, the mount has a highly flexible ball joint that allows for 360-degree rotation. This provides various viewing angles, allowing you to find the perfect angle for a more relaxed and safer driving experience.

Q: Can I charge my phone while using this mount?
A: Yes, there is a reserved port on the mount that allows you to connect a charging cable, ensuring that you can charge your phone while it is mounted.

Q: Is it easy to use with one hand?
A: Yes, the Beikell Support Téléphone Voiture features a one-click release button on the right side of the mount. This button automatically adjusts the width of the arms, making it easy to place and remove your phone with one hand.

Q: Is it durable and does it provide full protection for my phone?
A: Yes, the Beikell Support Téléphone Voiture is made of heat-resistant PC material, making it stronger than other mounts on the market. The silicone arms of the mount provide protection against scratches and prevent your phone from falling while driving.

Q: What devices is this mount compatible with?
A: The Beikell Support Téléphone Voiture is compatible with smartphones and GPS devices ranging from 4.7 to 6.7 inches in size. It is suitable for various models such as iPhone 14/13/13 Pro/13 Pro Max/12/12 Pro/11/11 Pro Max/XS/XR/7/8, Galaxy S9/S10/S20, Huawei P30/P30 Pro/P40, Oneplus 5T/7 Pro/8T, and more.

Q: What color is it?
A: The Beikell Support Téléphone Voiture is available in black.

Q: What are the dimensions of the product?
A: The dimensions of the Beikell Support Téléphone Voiture are 13 x 8.5 x 6.5 centimeters.

Q: Is it waterproof?
A: Yes, the Beikell Support Téléphone Voiture has a level of water resistance and is considered waterproof.

Q: Is it easy to install?
A: Yes, the installation of the Beikell Support Téléphone Voiture is easy. The suction cup can be attached to the desired surface, and the phone mount can be adjusted to the desired position using the telescopic arm and rotating ball joint.

Q: Is there a warranty for this product?
A: The availability of spare parts for this product is guaranteed for 5 years.

Q: What is the average customer rating for this product?
A: The average customer rating for the Beikell Support Téléphone Voiture is 4.2 out of 5 stars based on 70,694 ratings.

Q: What is the ASIN for this product?
A: The ASIN for the Beikell Support Téléphone Voiture is B0792Z94FF.

Q: What is the best-selling rank of this product on Amazon?
A: The Beikell Support Téléphone Voiture is ranked 38 in the category of car phone mounts on Amazon.

Q: When was it first available on Amazon.fr?
A: The Beikell Support Téléphone Voiture was first available on Amazon.fr on January 16, 2018.