ELAC Debut 2.0 B6.2 Bookshelf Speakers User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Welcome to the ELAC Debut 2.0 B6.2 Bookshelf Speakers! These speakers are designed to deliver high-quality sound for your music and home theater needs. With a newly developed 1" soft-dome tweeter, 6-1/2" aramid fiber woofer, and front-firing ports, you can expect excellent sound performance and easy room placement.

2. Package Contents

• 2 x ELAC Debut 2.0 B6.2 Bookshelf Speakers
• User Manual

3. Speaker Placement

Proper speaker placement is essential for optimal sound performance. Follow these guidelines for the best results:

• Position the speakers at least 6 inches away from the back wall.
• Place the speakers at ear level when seated.
• For stereo listening, position the speakers at an equal distance from the listening position, forming an equilateral triangle.
• For home theater setups, place the front speakers at a 22-30 degree angle to the sides of the listening position.

4. Connecting the Speakers

Before connecting the speakers, make sure your amplifier or receiver is turned off to prevent damage.

1. Strip approximately 1/2 inch of insulation from the ends of the speaker wire.
2. Insert the stripped end of the wire into the corresponding red (+) and black (-) binding post terminals on the back of the speaker.
3. Tighten the binding post terminals to secure the wire in place.
4. Connect the other end of the speaker wire to the corresponding terminals on your amplifier or receiver.
5. Repeat steps 1-4 for the second speaker.

5. Troubleshooting Tips

If you experience issues with your ELAC Debut 2.0 B6.2 Bookshelf Speakers, try these troubleshooting tips:

• Ensure all connections are secure and correct.
• Check that your amplifier or receiver is turned on and set to the correct input source.
• Adjust the volume and tone controls on your amplifier or receiver.
• Try a different audio source or input cable to rule out issues with the source material or cable.

6. Frequently Asked Questions

Q: What is the recommended amplifier power for these speakers?

A: The ELAC Debut 2.0 B6.2 Bookshelf Speakers have a maximum power input of 120 watts. An amplifier with a power output of 80 watts per channel or more is recommended for optimal performance.

Q: Can I use these speakers without a subwoofer?

A: Yes, these speakers have a frequency response of 44Hz - 35kHz, which provides a solid low end. However, adding a subwoofer can enhance the overall bass performance.

Q: What type of speaker wire should I use?

A: We recommend using high-quality copper speaker wire for the best performance.

Q: Can these speakers be wall-mounted?

A: The ELAC Debut 2.0 B6.2 Bookshelf Speakers are not designed for wall mounting. However, you can place them on speaker stands or shelves.

Q: What is the frequency response of the ELAC Debut 2.0 B6.2 Bookshelf Speakers?
A: The frequency response of the ELAC Debut 2.0 B6.2 Bookshelf Speakers is 44Hz – 35000Hz.

Q: What is the sensitivity of the ELAC Debut 2.0 B6.2 Bookshelf Speakers?
A: The sensitivity of the ELAC Debut 2.0 B6.2 Bookshelf Speakers is 87db at 2.83v/1m.

Q: What is the nominal impedance of the ELAC Debut 2.0 B6.2 Bookshelf Speakers?
A: The nominal impedance of the ELAC Debut 2.0 B6.2 Bookshelf Speakers is 6 Ohms.

Q: What is the recommended usage for the ELAC Debut 2.0 B6.2 Bookshelf Speakers?
A: The recommended usage for the ELAC Debut 2.0 B6.2 Bookshelf Speakers includes front or rear speakers for music and movies, for computers, for televisions, and for DVD players.

Q: What is the weight of the ELAC Debut 2.0 B6.2 Bookshelf Speakers?
A: The weight of the ELAC Debut 2.0 B6.2 Bookshelf Speakers is 16.31 pounds.

Q: Are these speakers Bluetooth enabled?
A: No, these are regular speakers that require hard wiring to an amplifier and other components.

Q: What stands would you recommend for the ELAC Debut 2.0 B6.2 Bookshelf Speakers?
A: It is recommended to use stands that position the tweeter at ear level when in your ideal seating position, such as Sanus BF24 stands.

Q: Can these speakers be mounted on a ceiling?
A: These are bookshelf speakers and are heavier than ceiling-mounted speakers. It is not recommended to mount them on a ceiling unless special clamps or other mounting solutions are used.

Q: What amplifier would you recommend for these speakers?
A: An Onkyo 50 watt RMS per channel or more amp, a Yamaha A-S301 and above, or a modern Marantz or NAD stereo amp with adequate power are recommended for these speakers.

Q: Can the tweeter grille be removed?
A: The main grille can be removed, but it is recommended to keep the tweeter grille on as it serves as a wave guide.

Q: What wall mount can secure these speakers horizontally and swiveled facing down from a tray ceiling side wall?
A: Wall mounts such as the VideoSecu MS56B or the Sanus VMPL50A-B1 can secure these speakers horizontally and swiveled facing down from a tray ceiling side wall.