ELAC Debut 2.0 B5.2 Bookshelf Speakers User Manual

Introduction

Welcome to your new ELAC Debut 2.0 B5.2 Bookshelf Speakers. These speakers are designed to deliver high-quality audio performance for both movies and music. In this user manual, you will find detailed instructions for setting up, using, and troubleshooting your speakers.

Package Contents

• 2 x ELAC Debut 2.0 B5.2 Bookshelf Speakers
• User Manual

Speaker Placement

For optimal performance, follow these guidelines for speaker placement:

• Place the speakers on a stable, flat surface.
• Position the speakers at least 6 inches away from any walls or other objects.
• For the best stereo imaging, angle the speakers slightly inward, so they are pointing towards your main listening position.
• Maintain an equal distance between the speakers and your listening position.

Connecting the Speakers

Before connecting your speakers, ensure that your AV receiver or stereo amplifier is turned off. Connect the speakers using the following steps:

1. Locate the speaker terminals on the back of each speaker.
2. Connect the red (+) terminal on the speaker to the red (+) terminal on your AV receiver or amplifier using speaker wire.
3. Connect the black (-) terminal on the speaker to the black (-) terminal on your AV receiver or amplifier using speaker wire.
4. Repeat these steps for the second speaker.
5. Ensure all connections are secure and turn on your AV receiver or amplifier.

Speaker Break-In

It is recommended to allow your speakers to "break-in" for approximately 30-50 hours of usage. This will allow the speaker components to settle and reach their optimal performance.

Troubleshooting

If you encounter any issues with your speakers, refer to the following troubleshooting tips:

• No sound: Check all connections between the speakers, AV receiver, or amplifier. Ensure the correct input is selected on your AV receiver or amplifier.
• Distorted sound: Ensure the speaker wire connections are secure and not touching each other. Check if the AV receiver or amplifier is set to an appropriate volume level.
• Uneven sound between speakers: Verify that the speakers are placed symmetrically and at equal distances from your listening position. Check the balance settings on your AV receiver or amplifier.

FAQ

What is the recommended amplifier power for these speakers?

The ELAC Debut 2.0 B5.2 Bookshelf Speakers have a 6-Ohm nominal impedance and are compatible with most AV receivers and stereo amplifiers.

Do these speakers require a subwoofer?

While the ELAC Debut 2.0 B5.2 Bookshelf Speakers deliver clean, tight bass on their own, adding a subwoofer can enhance the low-frequency performance for a more immersive listening experience.

Can I use these speakers as rear speakers in a surround sound system?

Yes, these speakers can be used as front or rear speakers in a surround sound system for both music and movies.

What is the difference between the Debut 2.0 B5.2 and B6.2 models?

The main difference between the two models is the size of the woofer, with the B5.2 featuring a 5-1/4" aramid fiber woofer and the B6.2 featuring a 6-1/2" aramid fiber woofer. This results in slightly different frequency responses and sensitivity levels.

For further assistance, please contact ELAC Customer Support.

Q: In which country are these ELAC Debut 2.0 B5.2 Bookshelf Speakers made?
A: The design is English/American/German by Andrew Jones, and the parts are sourced by him in China where they are made.

Q: Do these ELAC Debut 2.0 B5.2 Bookshelf Speakers come with rubber feet?
A: No, they do not.

Q: Will a Yamaha r-n303bl work with these ELAC Debut 2.0 B5.2 Bookshelf Speakers?
A: Yes, it will work well, as it provides more than enough power.

Q: Can I pair these ELAC Debut 2.0 B5.2 Bookshelf Speakers with Klipsch rp 250f?
A: Yes, you can pair them together.

Q: Is it easy to put a bare 16 gauge wire through the binding posts of these ELAC Debut 2.0 B5.2 Bookshelf Speakers?
A: Yes, it is easy to put bare wire through the binding posts. Unscrew the banana clips, exposing the hole through the binding posts. Strip the wire long enough to thread through and then thread through before screwing the posts closed until wires are snug.

Q: Would these ELAC Debut 2.0 B5.2 Bookshelf Speakers make good side surrounds?
A: Yes, they would make great surrounds and pair very well with front towers since they don't have to handle much bass in the first place.

Q: What do I need to connect these ELAC Debut 2.0 B5.2 Bookshelf Speakers to a Sonos port?
A: You will need an amp/receiver to connect these speakers to a Sonos port.

Q: What wiring do I need to connect these ELAC Debut 2.0 B5.2 Bookshelf Speakers to a TV?
A: There is no way to know without seeing the back of your TV. You will need an amplifier, but which type will depend largely on what connections your television has.

Q: Is there poly fill inside the cabinet of these ELAC Debut 2.0 B5.2 Bookshelf Speakers or are they just hollow?
A: It's just hollow inside, but you can easily add poly fill if desired. However, it isn't needed, and you are not likely to hear any difference. Room acoustics and speaker placement make the most significant difference and are the places most people should concentrate on.

Q: Would these ELAC Debut 2.0 B5.2 Bookshelf Speakers be loud enough for a spin studio? Could I use four of them, two in front and two in back? Looking for an inexpensive good system.
A: Yes, they would be loud enough for a spin studio, but it depends on what you are driving them with. You would need a 100W amp or larger for four speakers.

Lastly, customers have given these ELAC Debut 2.0 B5.2 Bookshelf Speakers an overall rating of 4.8 out of 5 stars based on 475 ratings. Customers have praised their easy-to-drive 6-Ohm nominal impedance that is compatible with nearly all AV receivers and stereo amplifiers, their 5-1/4" woven aramid fiber bass driver and 1" soft-dome tweeter that delivers deep impactful bass and smooth extended highs for both movies and music, their front-firing ports that allow greater flexibility in room placement even up against a wall, their 46Hz - 35kHz frequency response that ensures a wide range of accurately reproduced sound, and their thick MDF cabinet with internal bracing that reduces unwanted cabinet vibration.