JMDHKK Anti Spy Detector User Manual

Introduction

Package Contents

1. K18 RF Detector
2. RF Antenna
3. GS Probe for Magnetic Field Detection
4. USB Charging Cable
5. User's Manual (English)

Device Overview

The JMDHKK Anti Spy Detector features:

• RF Signal Detection for wireless bugs
• Magnetic Field Detection for GPS trackers
• Hidden Camera Lens Finder for wired and wireless cameras
• Adjustable Sensitivity
• LED Signal Strength Indicator
• Sound and Vibration Alarms
• Rechargeable Lithium Polymer Battery

Charging the Device

Before using the detector for the first time, fully charge the battery using the included USB charging cable. The charging time is approximately 2.5 hours. The device can work continuously for 5-8 hours on a full charge.

How to Use the Detector

RF Signal Detection

1. Turn off all known electronic devices that emit RF signals, such as cell phones, radios, Wi-Fi routers, and microwaves, to avoid interference.
2. Turn on the detector by pressing and holding the power button for 2 seconds.
3. Attach the RF antenna to the detector.
4. Adjust the sensitivity using the sensitivity knob. Higher sensitivity will detect signals from a greater distance, while lower sensitivity will help pinpoint the location of the signal source.
5. Slowly walk around the area you want to scan. The LED signal strength indicator will display the strength of detected signals. Green indicates low signal strength, yellow indicates medium signal strength, and red indicates high signal strength.
6. When the detector detects a strong signal, it will beep or vibrate. The alarm will become continuous when the signal source is locked.

Magnetic Field Detection

1. Attach the GS Probe to the detector.
2. Press and hold the GS button to activate the magnetic field detection mode.
3. Slowly move the probe around the area you want to scan. The detector will beep or vibrate when it detects a magnetic field.

Hidden Camera Lens Finder

1. Press and hold the camera button to activate the infrared scanning mode.
2. Look through the red-tinted viewfinder while slowly scanning the area.
3. Hidden camera lenses will appear as bright light spots in the viewfinder.

Troubleshooting Tips

• If the detector is not picking up any signals, make sure all known electronic devices that emit RF signals are turned off to avoid interference.
• If the detector is giving false alarms, try adjusting the sensitivity to a lower setting.
• If the detector is not detecting hidden cameras, make sure you are scanning the area slowly and thoroughly while looking through the viewfinder.
• If the battery is not charging, check the USB cable and ensure it is securely connected to both the detector and the power source.

Frequently Asked Questions

Q: Can the detector find GPS trackers that are turned off?

A: The detector can only detect GPS trackers that are actively transmitting signals. However, it can detect the magnetic fields created by magnetic GPS trackers, even if they are not currently transmitting.

Q: Does the detector work through walls?

A: The detector's effectiveness may be reduced by thick walls or other obstacles. For best results, scan each room individually.

Q: Can the detector detect wired cameras?

A: The hidden camera lens finder can detect both wired and wireless cameras. However, the RF signal detection will only detect wireless cameras that are actively transmitting signals.

Q: Can the detector detect 5G signals?

A: The detector can detect signals in the frequency range of 1 MHz to 8 GHz, which includes 5G signals.

Q: How often should I perform a sweep with the detector?

A: The frequency of sweeps depends on your personal needs and concerns. It is recommended to perform regular sweeps in areas where sensitive information is discussed or where privacy is a concern, such as offices, conference rooms, hotels, and rental properties.

Q: What is the JMDHKK Anti Spy Detector used for?
A: The JMDHKK Anti Spy Detector is a 3-in-1 multipurpose RF bug detector and counter surveillance tool that can be used to search and find bug devices such as wireless bugs, magnetic GPS trackers, and hidden wired or wireless cameras. It can also detect 2G/3G/4G mobile phone SIM card bugs, GPS locators, and electromagnetic radiation leak from microwaves.

Q: What are the key features of the JMDHKK Anti Spy Detector?
A: The key features of the JMDHKK Anti Spy Detector include:
1. 3-in-1 multipurpose RF bug detector and counter surveillance tool
2. Detects radio waves and magnetic fields
3. Detects hidden wired or wireless cameras
4. Detects 2G/3G/4G mobile phone SIM card bugs, GPS locators
5. Detects 1.2GHz/2.4GHz/5.8GHz wireless hidden camera, pinhole camera, spy camera, IP camera, webcam, monitor, microphone, eavesdropping device, surveillance device
6. Comes with Magnetic field probe to detect standby magnetic GPS locator, GPS tracker, hidden audio or video bug magnetically installed on covert place in your vehicle
7. Can detect electromagnetic radiation leak from microwaves
8. Sleek design with one sensitivity knob and 2 buttons for easy use
9. Adjustable sensitivity for detecting range
10. Colorful LEDs indicate signal strength levels
11. Sound and vibration alarm when signal strength reaches level 7 or higher
12. Lithium Polymer rechargeable battery with excellent battery life of 5-8 hours for continuous working and lasts for couples of months on standby state.

Q: What are the key applications of the JMDHKK Anti Spy Detector?
A: The key applications of the JMDHKK Anti Spy Detector include:
1. Sweeping office room and conference room for any intrusive audio-video bug devices
2. Scanning your vehicle for any unauthorized GPS trackers
3. Doing a bug sweeping in hotels/Airbnbs/vacation rentals/bathrooms/locker rooms/washrooms to find and remove any privacy threats.

Q: How does the Camera Detector/Finder work?
A: The Camera Detector/Finder is the simplest to use and most straightforward of all the counter surveillance devices. Infrared lights embedded in it will illuminate even the tiniest pinhole camera lens, and the specially red tinted View Finder built into the detector makes it easier to see the camera lens's reflection. The camera lens will appear as a bright light spot when you watch through the View Finder.

Q: How does the RF Bug Detector work?
A: The RF Bug Detector picks up RF (Radio Frequency) signals such as WiFi signals, GSM/DECT/CDMA cellular signals when they are working. It shows you increased signal strength on the signal strength indicator when it is getting near the signal source, and finally alerts you with sound or vibration when it is very near the signal source (the working wireless bug device), to notify you that a working wireless bug device is found and pinpointed. Please turn off known electronic devices that are emitting RF signals like cell phones, radios, WiFi routers, microwaves, cordless phones etc., before searching to eliminate any RF interference or signal noise.

Q: What is included in the package?
A: The package includes:
1. K18 RF detector
2. RF Antenna
3. GS Probe for Magnetic Field Detection
4. USB Charging Cable
5. User's Manual (English)