AMIR Refrigerator Thermometer User Manual
Product Overview
The AMIR Refrigerator Thermometer is a wireless temperature monitoring system designed to ensure your food is stored at safe temperatures in your refrigerator and freezer. It includes a main display unit and two sensors for indoor and outdoor use.
Getting Started
- Insert 2 x AAA batteries into the main unit and 4 x AA batteries into the transmitters (batteries not included).
- Place the main unit in a location where it can be easily viewed.
- Position the transmitters in your desired monitoring locations (e.g., inside the fridge or freezer).
- Wait for the transmitters to sync with the main unit. This may take a few minutes.
Installation
The main unit can be placed on a table, hung on the wall, or attached to a refrigerator using the built-in magnets. The sensors can be clipped onto a door or hung on the wall.
Operation
- Turning Alarms On/Off: Press the corresponding key on the main unit.
- Switching Between Celsius/Fahrenheit: Press the °C/°F button on the main unit.
- Clearing MAX/MIN Records: Press the CLR button on the main unit.
Setting Alarms
- Long press the 'Alarm' button on the main unit.
- Use the '+/-' buttons to set your desired minimum and maximum temperature thresholds.
- The alarm will sound if the temperature exceeds these settings after a 10-minute period.
Troubleshooting Tips
Temperature Error
If the temperature reading is inaccurate, ensure that the sensors are not near heat sources or humidifiers that can affect the reading. Wait for 20-30 minutes for the temperature to stabilize before comparing readings.
Sensor Connection Issues
Ensure there are no obstacles blocking the signal between the host and transmitter. If issues persist, try long pressing the 'Alarm + CLR' button for 3 seconds to enter long reception mode, or replace the batteries.
Alarm Not Working
Verify that the alarm temperatures are set correctly and wait for 10 minutes to see if the alarm updates and functions as expected.
Display Issues
If the screen content is not displayed, check the connection between the transmitter and main unit and replace the batteries if necessary.
Frequently Asked Questions (FAQ)
How do I ensure accurate temperature readings?
To ensure accurate readings, place the batteries in the transmitters and the host, and avoid heat sources during the initial setup. Allow the unit to stabilize for 20-30 minutes.
What do I do if the sensor cannot be connected?
Check for obstructions and ensure the batteries are installed correctly. If necessary, enter the long reception mode by pressing the 'Alarm + CLR' button for 3 seconds.
How do I set up the alarm?
Long press the 'Alarm' button and use the '+/-' buttons to set your desired temperature range. The alarm will update after 10 minutes.
Can I use this thermometer in cold climates or freezers?
Yes, but it is recommended to use Lithium batteries for the sensors, especially in very cold environments, as they operate well in temperatures down to -40°F.
What should I do if the screen content is not displayed?
Ensure the transmitter is properly connected to the main unit and the batteries are not dead. Replace the batteries if needed.
How often does the thermometer update the temperature reading?
The sensor refresh rates are approximately 57 seconds for Sensor 1 and 67 seconds for Sensor 2.
FAQ [continued]
**Product FAQ****Q: What is the temperature range for the AMIR Refrigerator Thermometer?**
A: The indoor temperature range is -10℃~ 60℃ (14℉~ 140℉) and outdoor temperature range is -40℃~ 60℃ (-40℉~140℉).
**Q: Does the thermometer come with audible alarms for temperature exceedance?**
A: Yes, the Wireless Thermometer console includes audible and visual alarms when temperature exceeds your pre-set minimum and maximum alarm settings.
**Q: How easy is it to read the display of the thermometer?**
A: The LCD screen features large digits and records Min and Max temperatures, providing historical temperature readings for easy monitoring.
**Q: What are the installation options for the wireless thermometer?**
A: The display unit can stand on a table, hang on a wall, or magnetically attach to a refrigerator. The wireless sensor can clip on a door or hang on a wall.
**Q: How do I operate the thermometer?**
A: There are 6 function keys on the main unit and a signal indicator on the transmitter. You can easily turn on/off the alarm, switch between Celsius and Fahrenheit, and clear MAX/MIN records by pressing the corresponding keys.
**Q: What type of batteries does the thermometer require?**
A: The main unit operates on 2 x AAA batteries (not included), while the transmitter requires 4 x AA batteries (not included).
**Q: Is it suitable for use in freezers or extremely cold climates?**
A: Lithium batteries are recommended for the freezer temperature sender as they work well down to -40F. Alkaline batteries work down to around -4F, while zinc-carbon AA batteries function down to approximately -20F with reduced output voltage.
**Q: Can I monitor multiple locations with this thermometer?**
A: Yes, this unit is set up for two individual sensors/monitored readings, allowing you to monitor temperatures in different locations simultaneously.
**Q: How reliable is this thermometer for monitoring food storage temperatures?**
A: Customers have found this thermometer to be simple, effective, and reliable for monitoring refrigerator and freezer temperatures to ensure food safety.
Specifications
| Brand | AMIR |
| Manufacturer | AMIR |
| Model Number | WA50&WA65 |
| Category | Tools & Home Improvement > Home & Kitchen > Kitchen & Dining > Kitchen Utensils & Gadgets > Thermometers & Timers > Refrigerator Thermometers |
| Is Discontinued By Manufacturer | No |
| Package Dimensions | 4.53 x 3.66 x 2.56 inches; 7.83 Ounces |
| Item model number | WA50&WA65 |
| Date First Available | March 7, 2018 |
| ASIN | B07B9N71VC |
| Country of Origin | China |
| Best Sellers Rank | See Top 100 in Kitchen & Dining |
| Color | White |
| Unit Count | 1 Count |
| Power Source | Battery Powered |
| Response Time | 500 Milliseconds |
| Ean | 0712195987089 , 0767421045774 |
| Part Number | WA50&WA65 |
| Power Source Type | Battery Powered |
| Response Time | 500 milliseconds |
| UNSPSC Code | 52150000 |
| UPC | 767421045774 , 712195987089 |
| Brand Name | AMIR |
| GTIN | 767421045774 , 712195987089 |
| First Available | March 7, 2018 |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content. By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.