Denon AVR-S540BT Receiver User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Initial Setup
4. Connecting Devices
5. Bluetooth Connectivity
6. Using the On-Screen Setup Assistant
7. Quick Select Buttons
8. Controlling with Smart TV Remote or Denon 500 Series Remote App
9. Troubleshooting Tips
10. Frequently Asked Questions

1. Introduction

Welcome to the world of Denon AVR-S540BT Receiver, a 5.2 channel home theater system with 4K Ultra HD audio and video, built-in Bluetooth and USB port, and compatibility with HEOS Link for wireless music streaming. This user manual will guide you through the setup and use of your new receiver.

2. Package Contents

• Denon AVR-S540BT Receiver
• Remote control (with 2 AAA batteries)
• Power cord
• Quick start guide

3. Initial Setup

1. Place the receiver on a stable and level surface with proper ventilation.
2. Connect the power cord to the receiver and plug it into a power outlet.
3. Insert the batteries into the remote control.

4. Connecting Devices

The Denon AVR-S540BT supports 5 HDMI inputs for connecting various devices such as TV, gaming systems, streaming devices, and more. To connect a device, follow these steps:

1. Turn off all devices before making any connections.
2. Connect the HDMI cable from the device to one of the HDMI inputs on the receiver.
3. Connect the HDMI output of the receiver to the HDMI input of your TV.

5. Bluetooth Connectivity

To connect your Bluetooth-enabled device to the receiver, follow these steps:

1. Turn on the Bluetooth function on your device.
2. Select the Denon AVR-S540BT from the list of available devices.
3. Once connected, you can stream music from your device to the receiver.

6. Using the On-Screen Setup Assistant

The Denon AVR-S540BT features an easy on-screen setup assistant to help you configure your system. To use the setup assistant, follow these steps:

1. Turn on the receiver and your TV.
2. Select the HDMI input on your TV corresponding to the receiver's HDMI output.
3. Follow the on-screen instructions to connect your devices, configure audio settings, and optimize surround sound for your room.

7. Quick Select Buttons

The receiver features four Quick Select buttons on the front panel that allow you to store and quickly switch between your preferred audio settings for different devices. To use the Quick Select buttons, follow these steps:

1. Select the desired input source and adjust the audio settings to your preference.
2. Press and hold one of the Quick Select buttons for a few seconds until the display shows "Memory."
3. To switch between stored settings, simply press the corresponding Quick Select button.

8. Controlling with Smart TV Remote or Denon 500 Series Remote App

You can control the AVR-S540BT using your Smart TV remote or by downloading the Denon 500 Series Remote App for iOS and Android. To control the receiver using your Smart TV remote, follow these steps:

1. Connect the receiver to your Smart TV using an HDMI cable.
2. Enable HDMI CEC control on both the receiver and your Smart TV.
3. Now you can use your Smart TV remote to control the receiver's volume, input selection, and surround mode.

To control the receiver using the Denon 500 Series Remote App, follow these steps:

1. Download the Denon 500 Series Remote App from the App Store or Google Play Store.
2. Connect your smartphone or tablet to the same Wi-Fi network as the receiver.
3. Open the app and follow the instructions to connect and control the receiver.

9. Troubleshooting Tips

• If you experience no sound or video, check all connections and ensure that the correct input source is selected on the receiver.
• If you cannot connect to Bluetooth, make sure the receiver is not connected to another device and that your device is within range.
• If you experience audio issues, try resetting the receiver to its factory settings and reconfiguring the audio settings using the on-screen setup assistant.

10. Frequently Asked Questions

Q: Can I connect a turntable to the Denon AVR-S540BT?

A: Yes, you can connect a turntable using an external phono preamp connected to one of the analog audio inputs on the receiver.

Q: Can I use the Denon AVR-S540BT with a 7.1 or 7.2 speaker setup?

A: The AVR-S540BT supports up to a 5.2 speaker setup. For a 7.1 or 7.2 speaker setup, you will need a receiver with more channels.

Q: Can I use the Denon AVR-S540BT with wireless speakers?

A: The AVR-S540BT does not support wireless speakers directly. However, you can use the HEOS Link to connect the receiver to compatible wireless speakers in a multi-room audio system.

Q: Does the Denon AVR-S540BT support Dolby Atmos or DTS:X?

A: The AVR-S540BT supports Dolby TrueHD and DTS-HD Master Audio but does not support Dolby Atmos or DTS:X.

Q: How many watts per channel for 8ohm speakers if only using front two , center speaker with sub woofer and no surround sound?
A: The Denon AVR-S540BT receiver delivers 140W per channel, which is suitable for driving power to your front two speakers, center speaker, and subwoofer.

Q: Are the hook up's for the subwoofer for a powered subwoofer speaker or a passive?
A: The connections are preamp outputs that are intended for use with a powered subwoofer. A passive sub will not work with this receiver.

Q: If I plug in an antenna that goes to my outside wireless speakers in the headphone jack, will it turn off my inside connected speakers?
A: It is not recommended to use the headphone jack for your wireless speakers as it may remove sound from your hooked up speakers. If your speakers are wireless, try using the Bluetooth or WiFi feature on the Denon receiver to pair them.

Q: Do you need a TV to set up Pandora or a wireless connection?
A: You need a TV or monitor that is capable of HDMI to use the on-screen setup. However, you can also set up music without a TV using the Denon AVR app.

Q: How do I connect bookshelf, center, tweeter, and sub speakers to this receiver and then all that to a projector?
A: Denon provides a tutorial on connecting your surround sound speakers. To have video playing from your projector and sound to your surround sound system, you can run an HDMI cable from the DVD or video player to the projector, and another HDMI cable from the projector to the receiver. Alternatively, you can run a video cable from the receiver or DVD/video player to the projector.

Q: Can I add an amplifier to this device?
A: The Denon AVR-S540BT is already a receiver/amplifier with a 5-channel, 700-watt amplifier built-in. It is not designed to pair with any additional amplifiers.

Q: Is it compatible with Nintendo Switch for 5.1, taking into account that the Switch outputs PCM for surround sound?
A: Yes, the AVR-S540BT is compatible with PCM and digital audio signals, and it also has Dolby ProLogic II, which can be selected when playing back 2-channel sources in 5.1-channel surround sound.

Q: Why does the screen turn pinkish after 2 hours of casting Amazon videos when Chromecast is connected to media player HDMI in?
A: A pink screen can be caused by a number of things, including an issue with the AVR's HDMI board or a faulty HDMI cable. It is recommended to replace the HDMI input cable and contact Denon support if the issue persists.

Q: Did anyone else have trouble setting this up with a Sony Bravia TV?
A: Some users have reported issues with setting up the Denon AVR-S540BT with a Sony Bravia TV. It is recommended to ensure that both devices are updated to their latest firmware versions and try using the Denon remote app for easier setup.