6.5 Inch Bluetooth Marine Speakers User Manual

Package Contents

• 2 x 6.5" Coaxial Speakers (Active + Passive)
• Mounting Hardware
• User Manual

Installation

1. Choose a suitable location for the speakers on your watercraft or off-road vehicle, ensuring there is enough space behind the mounting surface for the speakers and wiring.
2. Use the provided cut-out template to mark the cut-out diameter (6.75 inches) on the mounting surface.
3. Carefully cut out the marked area using a suitable cutting tool.
4. Feed the speaker wires through the cut-out hole and connect them to the active speaker (with built-in amplifier) using the provided connectors.
5. Secure the active speaker in the cut-out hole using the provided mounting hardware.
6. Connect the passive speaker to the active speaker using the provided connectors.
7. Secure the passive speaker in its cut-out hole using the provided mounting hardware.

Bluetooth Pairing

1. Turn on your Bluetooth-enabled device (smartphone, tablet, laptop, or computer).
2. Ensure the speakers are powered on. The LED light on the active speaker will be red when not connected.
3. On your Bluetooth-enabled device, search for available Bluetooth devices and select "PLMRBT65B" from the list.
4. Once connected, the LED light on the active speaker will turn blue, and you can now stream music wirelessly from your device to the speakers.

Troubleshooting Tips

• Speakers not powering on: Check the wiring connections and ensure they are secure. Verify that the speakers are receiving power from your watercraft or off-road vehicle's electrical system.
• Bluetooth not connecting: Ensure the speakers are powered on and within range (+30ft) of your Bluetooth-enabled device. If the problem persists, try restarting your device or resetting its Bluetooth settings.
• Distorted sound or low volume: Check the speaker connections and ensure they are secure. If the issue persists, the speakers may be underpowered or overpowered. Verify that the speakers are receiving the appropriate power (300 Watt RMS, 600 Watt peak) from your watercraft or off-road vehicle's electrical system.
• Intermittent Bluetooth connection: Ensure there are no physical obstructions between the speakers and your Bluetooth-enabled device. If the problem persists, try moving your device closer to the speakers or resetting its Bluetooth settings.

Frequently Asked Questions

Can these speakers be used on a motorcycle?

While they can be installed on a motorcycle, they may not be loud enough at higher speeds due to wind and engine noise. An additional amplifier may be required to achieve the desired volume.

Is a separate amplifier required for these speakers?

No, the active speaker has a built-in 2-channel digital amplifier. However, if you desire a higher volume or better sound quality, an additional amplifier can be used.

Can these speakers be connected to a head unit?

Yes, these speakers can be connected to a head unit using RCA, Bluetooth, Auxiliary, or Coaxial connectivity options.

Are these speakers suitable for outdoor use?

Yes, these speakers are weather resistant and have an IP-X4 waterproof rating, making them suitable for outdoor use on watercraft and off-road vehicles.

What is the warranty on these speakers?

Please refer to the manufacturer's warranty information provided with the product or contact Pyle or Sound Around for warranty details.

Q: What is the waterproof rating of these marine speakers?
A: These marine speakers have a waterproof rating of IP-X4, making them completely waterproof for water-based automobile and off-road vehicle use.

Q: Does this speaker system have Bluetooth connectivity?
A: Yes, this speaker system has built-in 4.2 Bluetooth wireless streaming receiver for a simple and hassle-free connection. It works with smartphones, tablets, laptops, and computers with a wireless range of +30ft.

Q: What is the power output of these speakers?
A: These audio speakers have a full range stereo sound reproduction for a complete speaker system with a power output of 300 Watt RMS up to 600 Watt peak.

Q: Are these speakers weather resistant?
A: Yes, these speakers are made of rugged and durable materials that are weather-resistant. They have an engineered ABS housing construction, dual Polypropylene cone, cloth surround, Molded ABS Machined basket and grill to combat sun damage.

Q: What is the size of these marine speakers?
A: These marine speakers have a low profile design in black that makes them easy to install with a 6.5-inch standard size. They have a universal standard OEM replacement size with a mounting depth of 3.1 inches and a cut-out size of 6.75 inches.

Q: Can I connect other speakers to this system?
A: If you want to add other speakers, you have to use an amplifier. You may plug all the speakers there together with this unit.

Q: Can I use these speakers without Bluetooth?
A: Yes, you can connect the speakers to your stereo or amplifier.

Q: Do I need a radio receiver for these speakers?
A: No, you do not need a radio receiver for these speakers as they can be used from any device that is Bluetooth equipped.

Q: How many amps does this speaker system draw?
A: This unit draws around 50 amps.

Q: Are these speakers loud enough for a motorcycle?
A: These speakers may not be loud enough for a motorcycle, especially if you have stock pipes. It is recommended to use a head unit and hook them up to an amplifier for better sound quality.