Go Power! GP-ISW2000-12 Industrial Pure Sine Wave Inverter User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Installation
4. Operation
5. Troubleshooting
6. Frequently Asked Questions

1. Introduction

Thank you for choosing the Go Power! GP-ISW2000-12 Industrial Pure Sine Wave Inverter. This inverter is designed to provide clean, reliable AC power for your large loads and is perfect for use with shop tools, solar panels, and battery banks. With 2000 watts of output power and two GFCI outlets, this inverter is a solid choice for a wide range of applications.

2. Package Contents

• Go Power! GP-ISW2000-12 Industrial Pure Sine Wave Inverter
• Connector covers
• User manual

3. Installation

1. Choose a suitable location for the inverter, ensuring it is well-ventilated and free from direct sunlight, moisture, or flammable materials.
2. Mount the inverter securely using the provided mounting holes.
3. Connect the inverter to your 12V battery bank using appropriately sized cables and a suitable fuse or circuit breaker. Ensure that the connections are secure and that the polarity is correct (red to positive, black to negative).
4. Attach the connector covers to the input terminals for added safety.

4. Operation

1. Turn the rocker switch on the front of the inverter to the "ON" position. The inverter will power up and be ready to provide AC power.
2. Plug your devices into the two GFCI outlets on the front of the inverter.
3. Monitor the inverter's performance, ensuring that the load does not exceed 2000 watts. If the load is too high, the inverter may shut down to protect itself.
4. Turn the inverter off when not in use to conserve battery power.

5. Troubleshooting

Inverter does not turn on:

Check the battery connections and ensure they are secure and correctly connected. Verify that the fuse or circuit breaker is intact and functioning properly.

Inverter shuts down during operation:

Ensure that the load does not exceed 2000 watts. Check for adequate ventilation around the inverter and ensure it is not overheating.

Fan is noisy or runs frequently:

Verify that the inverter is not overheating and that there is adequate ventilation. If the issue persists, contact Go Power! customer support for assistance.

6. Frequently Asked Questions

Does the inverter have a USB port?

No, the GP-ISW2000-12 does not have a USB port. You will need to use a standard plug-in adapter for USB devices.

What is the efficiency of the inverter?

The inverter has an efficiency of 91%.

Can I use this inverter to power my air conditioner?

It depends on the power requirements of your air conditioner. Ensure that the total load does not exceed 2000 watts. If your air conditioner requires more power, you may need a larger inverter.

Is the cooling fan supposed to run frequently?

The cooling fan is designed to run when the inverter is under load or when the temperature around the unit is high. If the fan is running frequently, ensure that the inverter is not overheating and that there is adequate ventilation.