Bousnic Dog Training Collar User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Charging the Collar and Remote
4. Setting Up the Collar
5. Using the Remote
6. Training Your Dog
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Bousnic Dog Training Collar. This collar is designed to help you train your dog effectively and humanely. With customizable Static Shock, Vibration, and Tone modes, this collar allows you to tailor your training to your dog's temperament and needs. Please read this user manual carefully before using the product.

2. Package Contents

• Remote Transmitter
• 2 Collar Receivers
• 2 Adjustable Nylon Collar Straps (one black, one yellow)
• USB Charging Cable
• 2 Sets of Contact Points (short and long)
• 2 Sets of Conductive Silicone Covers
• Test Light
• User Manual

3. Charging the Collar and Remote

Both the collar receiver and remote transmitter are rechargeable. To charge, connect the USB charging cable to the charging port on the collar receiver and the remote transmitter. Plug the other end of the cable into a USB outlet, such as a phone adapter, power bank, or computer. The collar receiver takes 2-3 hours to charge and lasts 15-20 days, while the remote transmitter takes 2-3 hours to charge and lasts up to 60 days on standby.

4. Setting Up the Collar

1. Choose the appropriate contact points (short for short-haired dogs, long for long-haired or thick-coated dogs).
2. Screw the selected contact points onto the collar receiver.
3. Attach the conductive silicone covers to the contact points.
4. Thread the adjustable nylon collar strap through the collar receiver, as shown in the provided instructions with photographs.
5. Fit the collar around your dog's neck, ensuring the contact points touch the skin and the collar is comfortable but secure.

5. Using the Remote

The remote transmitter allows you to control the training modes and adjust the intensity levels. It also features a dual channel to support training 2 dogs simultaneously. To use the remote:

1. Press the "1/2" button to switch between Dog 1 and Dog 2.
2. Select the desired training mode: Tone (beep), Vibration, or Static Shock.
3. Adjust the intensity level using the "+" and "-" buttons (Vibration: 1-8, Static Shock: 1-16).
4. Press the corresponding button for the selected mode to activate it.

6. Training Your Dog

Start with the Tone mode, followed by Vibration mode. Use Static Shock mode as a last resort. Begin at the lowest intensity level and increase gradually until your dog responds. Repeat and reinforce commands, rewarding good behavior. Consult dog training resources for best practices and techniques.

7. Troubleshooting Tips

• If the collar does not respond, ensure it is charged and turned on.
• Check that the remote transmitter is charged and functioning properly.
• Ensure the contact points are securely attached and the silicone covers are in place.
• Verify the collar is properly fitted on your dog's neck, with the contact points touching the skin.

8. Frequently Asked Questions

Q: Is the remote transmitter waterproof?

A: No, the remote transmitter is not waterproof. Please keep it away from water.

Q: Can I charge both collar receivers at the same time?

A: The included charging cable allows you to charge one collar receiver and the remote transmitter at the same time. To charge both collar receivers simultaneously, you would need an additional charging cable.

Q: How do I know if the Static Shock mode is working?

A: Use the included test light by attaching it to the contact points on the collar receiver. Press the Static Shock button on the remote transmitter. The test light should illuminate if the mode is functioning correctly.

Q: Can I use this collar on small dogs?

A: The Bousnic Dog Training Collar is recommended for dogs weighing 15-120 lbs and with neck sizes between 8-26 inches.

Q: What are the training modes available with the Bousnic Dog Training Collar?
A: The Bousnic Dog Training Collar offers three training modes - beep, vibration, and safe static shock.

Q: Can the collar be used for two dogs simultaneously?
A: Yes, the remote features dual channels to support training two dogs simultaneously.

Q: What is the range of the remote?
A: The remote can reach up to 1000 feet, making it suitable for indoor and outdoor training.

Q: Is the collar waterproof?
A: Yes, the collar receiver is rated IP67 waterproof, making it suitable for use during outdoor activities.

Q: How long does the battery last?
A: Both the transmitter and receiver are rechargeable and can last up to 15-20 days on a single charge.

Q: What is the recommended dog weight and neck size for this collar?
A: The collar is recommended for dogs weighing between 15-120 lbs and with neck sizes ranging from 8-26 inches.

Q: Are there replaceable prongs?
A: Yes, there are replaceable conductive silicone prongs and metal prongs.

Q: How do I properly use the dog training collar?
A: It is important to read the user manual carefully before using the collar on your dog. Install the collar receiver with appropriate contact prongs and attach it to your dog's neck. Start training your dog at beep mode, then vibration mode, and if necessary, use shock mode as a last resort. Repeat and reinforce commands to understand and reward good behavior.

Q: How do I charge the collar?
A: To charge the collar, use a phone adapter, USB outlet of a power bank/computer/car or any other source with worldwide voltage compatibility. There is no adapter included in the package.

Q: Can I replace just the remote or charger if needed?
A: Yes, replacement remotes and chargers are available for purchase on Amazon or by contacting the manufacturer's customer support.