ResponseBridge Bluetooth Wireless Voice Amplifier Megaphone Speaker - Black
The Bluetooth Wireless Voice Amplifier Microphone Speaker Waterproof is a highly practical and versatile device that is perfect for outdoor activities, teachers, fitness instructo…
Manual and instructions
Instruction-focused content generated from the current product data and source context.
User Manual: Bluetooth Wireless Voice Amplifier Microphone Speaker Waterproof
Table of Contents
- Package Contents
- Product Overview
- Charging the Device
- Using the Wireless Microphone
- Connecting to Bluetooth
- Playing Music via Aux Input, TF Card, or U Disk
- Recording Function
- Troubleshooting Tips
- Frequently Asked Questions
1. Package Contents
- Voice amplifier
- Wireless microphone headset
- Charger
- User Manual
- 3.5mm audio cable
- Adjustable waistband
2. Product Overview
This Bluetooth Wireless Voice Amplifier Microphone Speaker Waterproof is designed to provide clear and loud amplification for your voice. It features an 18W output, wireless UHF headset microphone, Bluetooth connectivity, and IPX5 waterproof rating. This device is perfect for teachers, fitness instructors, tour guides, and outdoor activities.
3. Charging the Device
Before using the device, fully charge the built-in 4400mAh rechargeable battery. To charge the device, connect the provided charger to the DC 8V port on the device and plug it into a power outlet. The charging time is approximately 3-5 hours, and the device can last up to 12 hours on a single charge.
4. Using the Wireless Microphone
To use the wireless microphone headset, first power on the voice amplifier by pressing the power button. Then, turn on the microphone by pressing the power button located on the headset. The microphone should automatically connect to the amplifier via UHF signal. Adjust the volume using the volume control knob on the amplifier.
Attention:
- Do not place the voice amplifier and microphone too close together (greater than 40-50 cm) to avoid feedback noise.
- Before using the microphone, turn down the volume and adjust it according to your needs.
- Do not point the microphone directly at the speaker.
5. Connecting to Bluetooth
To connect the device to your Bluetooth-enabled mobile device, first power on the voice amplifier. Press the 'Mode' button to switch to Bluetooth mode. On your mobile device, search for available Bluetooth devices and select the voice amplifier from the list. Once connected, you can stream music from your mobile device through the amplifier.
6. Playing Music via Aux Input, TF Card, or U Disk
The voice amplifier also supports playing music via Aux input, TF Card, and U Disk. To play music using one of these methods, connect your music device using the provided 3.5mm audio cable, insert a TF Card, or connect a U Disk to the appropriate port. Press the 'Mode' button to switch to the desired input mode.
7. Recording Function
The voice amplifier features a recording function that allows you to record special moments, favorite songs, or class lectures. To start recording, press and hold the 'Record' button for 3 seconds. The device will start recording and save the audio file to the inserted TF Card. To stop recording, press the 'Record' button again.
8. Troubleshooting Tips
- If the device is not turning on, ensure that the battery is fully charged.
- If the microphone is not connecting to the amplifier, ensure both devices are powered on and within range.
- If you are experiencing feedback noise, increase the distance between the microphone and the amplifier or lower the volume.
- If you cannot connect to Bluetooth, ensure your mobile device's Bluetooth is enabled and within range of the amplifier.
9. Frequently Asked Questions
- Is the Bluetooth function available for both the voice amplifier and the microphone?
The Bluetooth function is available for the voice amplifier only, not for the wireless microphone. - Can I use this device for indoor activities?
While the device is designed for outdoor use, it can be used for small indoor activities as well. - What is the range of the wireless microphone?
The wireless microphone has a range of up to 35 meters (100 feet). - Is this device waterproof?
The voice amplifier has an IPX5 waterproof rating, making it suitable for use in most outdoor activities without worrying about rain. - How long does the battery last?
The 4400mAh rechargeable battery provides up to 12 hours of continuous amplification on a single charge.
Frequently asked questions
Q: How to pair this wireless amplifier and microphone?
A: The voice amplifier and wireless microphone are normally already paired before you receive the package. If you need to re-pair them, please follow these steps: Turn on the voice amplifier, short press "M" key to switch to UHF mode, long press "M" key for 3 seconds, and the amplifier will prompt "UHF is waiting for connection". Turn on the wireless microphone and long press the top key for 5 seconds until it pairs successfully with a voice prompt "UHF is connected". If you have any problems with the product, please contact the Service Department at [email protected].
Q: Can you connect to a separate speaker with music via Bluetooth?
A: Yes, you can connect to a separate speaker with music via Bluetooth.
Q: How do I get a second wireless mic headset for this to use when battery dies on first headset?
A: The wireless set is unreliable, and it may be difficult to find a replacement. It is recommended to use a wired microphone instead.
Q: It says the battery can last up to 2-3 years. But I don’t see any opening on the device to put new ones. Can the batteries be replaced by the owner?
A: The battery in both the headset and amplifier is rechargeable. There is no need to replace them, but if there is an issue with the battery life, contact customer service.
Q: Can I use multiple of these units in the same room with different presenters on each one?
A: Yes, you can use multiple units in the same room with different presenters on each one. However, pair each unit one by one to avoid cross-connection.
Q: Does this work well with a mask?
A: The microphone will pick up sound through a mask if spoken forcefully enough. This amplifier may do better than others on the market.
Q: Can you connect a lavalier mic?
A: Yes, you can use a lavalier mic with this amplifier.
Q: Will both units work while being charged, or do they not work while plugged in?
A: Both the voice amplifier and wireless mic will work while being charged.
Q: Is it possible to play music and amplify at the same time? Can I use it as a mini karaoke system?
A: Yes, you can play music and amplify at the same time. This can be used as a mini karaoke system.
Q: Is it possible to order a second microphone for the same speaker? My battery dies before my day is over.
A: If you need a replacement microphone, please contact customer service at [email protected].
Specifications
Structured product details pulled from the latest available product data.
| Brand | ResponseBridge |
|---|---|
| Manufacturer | SHIDU Digital |
| Model Number | RB-800U |
| Category | Musical Instruments > Live Sound & Stage > PA Systems |
| Color | Black-wireless |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Weight | 13 ounces |
| Dimensions | 4.7 x 3.8 x 1.8 inches |
| First Available | May 19, 2018 |
| Mounting Type | Tabletop |
| Power Source | Battery Powered |
| Connector Type | Aux |
| Item Weight | 13 Ounces |
| Number of Channels | 1 |
| Audio Input | 'TF card', 'U disk', '3.5mm audio cable' |
| Recommended Uses For Product | Singing, Speaking |
| Frequency Response | 18 KHz |
| Product Dimensions | 4.7 x 3.8 x 1.8 inches |
| ASIN | B07D5YC4T8 |
| Item model number | RB-800U |
| Batteries | 1 A batteries required. (included) |
| Customer Reviews | 4.0 4.0 out of 5 stars 464 ratings 4.0 out of 5 stars |
| Best Sellers Rank | #48,882 in Musical Instruments (See Top 100 in Musical Instruments) #430 in PA Systems |
| Is Discontinued By Manufacturer | No |
| Date First Available | May 19, 2018 |
| Color Name | Black-wireless |
| Material Type | Acrylonitrile Butadiene Styrene (ABS) |
| Output Wattage | 18 Watts |
| Battery type | Lithium Polymer |
| Wattage | 18 watts |
| Item dimensions L x W x H | 4.7 x 3.8 x 1.8 inches |
| Connectivity Technology | Wireless |
| Compatible Devices | Amplifier, Headphone, Smartphone, Speaker |
Use this page carefully
ProductReviewGPT pages are AI-assisted summaries. When a source document is available, it should take priority over the generated summary for important operating, warranty, safety, or compliance details.