Master & Dynamic MW50+ Wireless Bluetooth Headphones User Manual

Table of Contents

1. Package Contents
2. Getting Started
3. Charging the Headphones
4. Pairing with Bluetooth Devices
5. Controls and Functions
6. Switching Between On-Ear and Over-Ear Pads
7. Troubleshooting
8. Frequently Asked Questions

1. Package Contents

• MW50+ Wireless Bluetooth Headphones
• On-Ear and Over-Ear Lambskin Ear Pads
• USB-C Charging Cable
• 3.5mm Audio Cable
• Canvas Headphone Pouch
• User Manual

2. Getting Started

Before using the MW50+ headphones, ensure that they are fully charged. Please refer to the charging instructions below.

3. Charging the Headphones

1. Connect the USB-C charging cable to the charging port on the headphones.
2. Connect the other end of the cable to a USB power source, such as a computer or USB wall charger.
3. The LED indicator on the headphones will turn red while charging and turn off when fully charged.
4. Allow the headphones to charge for approximately 2 hours or until fully charged.

4. Pairing with Bluetooth Devices

1. Ensure that the headphones are turned off.
2. Press and hold the power button for 5 seconds until the LED indicator starts flashing blue and red.
3. On your Bluetooth device, go to the Bluetooth settings and search for available devices.
4. Select "MW50+” from the list of devices to pair.
5. Once connected, the LED indicator on the headphones will turn blue.

5. Controls and Functions

• Power Button: Press and hold for 5 seconds to turn the headphones on or off.
• Volume Up/Next Track: Press briefly to increase volume or press and hold for 2 seconds to skip to the next track.
• Volume Down/Previous Track: Press briefly to decrease volume or press and hold for 2 seconds to skip to the previous track.
• Play/Pause/Answer Call: Press the power button once to play or pause audio playback, or to answer or end a phone call.

6. Switching Between On-Ear and Over-Ear Pads

1. Remove the current ear pads by gently pulling them away from the headphones. The pads are held in place by magnets.
2. Align the holes on the new ear pads with the pins on the headphones.
3. Gently press the new ear pads onto the headphones until the magnets hold them securely in place.

7. Troubleshooting

• No Sound: Ensure that the headphones are properly connected to your device, either via Bluetooth or with the 3.5mm audio cable. Check the volume level on both the headphones and your device.
• Bluetooth Connection Issues: Ensure that the headphones are in pairing mode (LED indicator flashing blue and red) and that your device's Bluetooth is turned on. Move closer to your device and remove any obstacles between the headphones and the device. If the issue persists, try resetting the Bluetooth connection by turning off the headphones and your device, then repeating the pairing process.
• Charging Issues: Ensure that the USB-C charging cable is properly connected to the headphones and a USB power source. Try using a different USB power source or charging cable if the issue persists.

8. Frequently Asked Questions

Q: How long does the battery last on a single charge?

A: The MW50+ headphones have a battery life of up to 16 hours on a single charge.

Q: Can I use these headphones for phone calls?

A: Yes, the MW50+ headphones have a built-in microphone for phone calls. Press the power button once to answer or end a call.

Q: Are these headphones noise-canceling?

A: The MW50+ headphones are not active noise-canceling, but they do provide some passive noise isolation, especially when using the over-ear pads.

Q: Can I use these headphones with a wired connection?

A: Yes, the MW50+ headphones can be used with the included 3.5mm audio cable for a wired connection.

Q: Where are the MW50+ headphones made?
A: The MW50+ headphones are made in China.

Q: What does the noise isolation technology do?
A: The noise isolation technology helps block outside noises, making it easier to focus on your music or work.

Q: What materials are used in the MW50+ headphones?
A: The MW50+ headphones are made with premium grain cowhide leather, lambskin leather, stainless steel, and aluminum.

Q: Are the MW50+ headphones comfortable to wear?
A: Yes, the MW50+ headphones are designed to be comfortable and lightweight. You can choose between on-ear or over-ear pads depending on your preference.

Q: How long is the battery life of the MW50+ headphones?
A: The MW50+ headphones have a battery life of up to 16 hours from a single charge.

Q: Does the MW50+ have a built-in mic?
A: Yes, the MW50+ has a built-in mic for hands-free calling.

Q: Can you charge the MW50+ with a USB-C cable?
A: Yes, the MW50+ can be charged with a USB-A to USB-C cable.

Q: Are there vegan alternatives to the leather materials used in the MW50+ headphones?
A: At this time, Master & Dynamic only offers leather options for the MW50+. However, they do offer an Alcantara model of their wired MH40 headphone.

Q: Do the MW50+ headphones come with a USB-C dongle charger?
A: No, the MW50+ comes with a USB-A to USB-C cable and a 3.5mm M to M cable. No other adapter is included.

Q: How do the MW50+ compare to Bose QC35ii for noise cancelling on a plane?
A: The MW50+ is not active noise cancelling — it's passive noise isolating by virtue of being closed-back headphones.

Q: Do the black/black model (over-ear) charge with USB-C?
A: Yes, the black/black model of the MW50+ charges with USB-C. Additionally, you can change the earcups so you have both around the ear and over-ear options.

Q: What is included in the box with the MW50+ headphones?
A: The MW50+ headphones come with a USB-A to USB-C cable, a 3.5mm M to M cable, and interchangeable on-ear and over-ear lambskin ear pads.