Dash Cam Hardwire Kit User Manual

Package Contents

• 1 x Mini USB hardwire kit
• 1 x Installing crowbar
• 4 x Fuse tap cable

Product Features

• 24 Hours Surveillance
• High Secure Standards
• Wide Compatibility
• Easy Installation

Installation Steps

1. Find the correct fuse slot: Open the fuse box and find the correct fuse slot for your hardwire kit. Identify the fuse which is not lit up while the car is off, and test it by turning the car on to see if it lights up.
2. Connect the red wire: Crimp the red wire of your hardwire kit onto the Add-A-Fuse. Gently remove the fuse you identified. Install the fuse you just removed into the installation kit add-a-fuse circuit. Plug the add-a-circuit into the fuse box in the correct orientation.
3. Ground the hardwiring kit: Slip the black wire (which is in the shape of a C) under a metal bolt or screw in your vehicle (this is the ground wire). Check that it is not attached to plastic parts. Loosen the nut or bolt enough to slip it in and tighten it back up afterwards.
4. Connect the mini USB: Connect the mini USB end of the hardwire kit to your dash cam or other compatible device.

Troubleshooting Tips

• If the dash cam does not power on, double-check the fuse connection and ensure the ground wire is securely connected to a metal surface.
• If the low voltage protection feature does not work, ensure the red wire is connected to the correct fuse slot and the fuse is properly installed.
• For compatibility issues, verify that your device uses a mini USB input and the voltage requirements match the hardwire kit output (5V / 2A).

Frequently Asked Questions

Q: Will this hardwire kit work with my dash cam?

A: This hardwire kit is compatible with most car mini USB devices, such as dash cams, mirror cams, GPS navigators, and radar detectors. Ensure your device uses a mini USB input and has voltage requirements that match the hardwire kit output (5V / 2A).

Q: Can I use this hardwire kit with a 24V vehicle?

A: Yes, this hardwire kit accepts voltage from any type of vehicles that run on 12V to 24V.

Q: How do I know which fuse slot to use for my hardwiring kit?

A: Put the key in the vehicle and find the fuse which is not lit up while the car is off. Test it by turning the car on to see if it lights up. If your kit requires constant power, turn off the car and remove the key to see which fuse slots stay lit on.

Q: How do I ensure the ground wire is properly connected?

A: Make sure the ground wire (black wire) is slipped under a metal bolt or screw in your vehicle, and not attached to plastic parts. Loosen the nut or bolt enough to slip it in and tighten it back up afterwards.

Q: What is the Plozoe Dash Cam Hardwire Kit?
A: The Plozoe Dash Cam Hardwire Kit is a device that allows you to hardwire your dashcam to your car's battery or fuse box, providing continuous power to your dashcam.

Q: What are the features of the Plozoe Dash Cam Hardwire Kit?
A: The Plozoe Dash Cam Hardwire Kit has several features, including low voltage protection, 24-hour parking surveillance, four types of fuse adapters for almost all cars, high-quality copper conductor, and easy installation.

Q: What is low voltage protection?
A: Low voltage protection is a feature that protects your car battery by automatically turning off the power when your car's voltage drops below a certain level.

Q: Can the Plozoe Dash Cam Hardwire Kit provide power to my dashcam even when my car is turned off?
A: Yes, the Plozoe Dash Cam Hardwire Kit can provide power to your dashcam even when your car is turned off.

Q: Is the Plozoe Dash Cam Hardwire Kit compatible with most car models?
A: Yes, the Plozoe Dash Cam Hardwire Kit is suitable for most car models with a voltage between 12-24V.

Q: Is installation of the Plozoe Dash Cam Hardwire Kit easy?
A: Yes, installation of the Plozoe Dash Cam Hardwire Kit is easy and can be done in minutes with little to no expertise required.

Q: What comes in the package when I purchase the Plozoe Dash Cam Hardwire Kit?
A: The package includes 1 x Mini USB hardwire kit, 1 x installing crowbar, 4 x fuse tap cable, and dash cam hardwire with the most popular fuse types that will meet the applications for most car models.

Q: Does the Plozoe Dash Cam Hardwire Kit come with a fuse puller?
A: Yes, the Plozoe Dash Cam Hardwire Kit comes with one free fuse puller inside the storage box for easy picking.

Q: Can I use the Plozoe Dash Cam Hardwire Kit for other devices besides dash cams?
A: Yes, the Plozoe Dash Cam Hardwire Kit works for almost all car mini & micro USB device, such as mirror cam, GPS navigator, and radar detector, etc.