Victrola 6-in-1 Wood Bluetooth Mid Century Record Player User Manual

Table of Contents

1. Getting Started
2. Using the Turntable
3. Playing CDs and Cassettes
4. Using the FM Radio
5. Connecting to Bluetooth
6. Connecting External Devices
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Getting Started

Unpack your Victrola 6-in-1 Record Player carefully and place it on a flat, stable surface. Plug the power cord into a wall outlet. Make sure the voltage rating of your outlet matches the rating on the back of the unit.

2. Using the Turntable

1. Open the turntable lid.
2. Select the desired speed for your vinyl record (33 1/3, 45, or 78 RPM) using the speed selector switch.
3. If playing a 45 RPM record, place the included 45 RPM adapter on the spindle.
4. Place your vinyl record on the turntable platter.
5. Unlock the tonearm by gently sliding the tonearm lock to the right.
6. Hold the tonearm and carefully move it over the record's edge.
7. Gently lower the tonearm lever to place the needle on the record.
8. The turntable will begin to play your record. Adjust the volume using the volume knob.
9. To stop playing, lift the tonearm lever, return the tonearm to its resting position, and lock it in place with the tonearm lock.

3. Playing CDs and Cassettes

To play CDs, press the "CD" button and insert a CD into the CD slot. Press the "Play/Pause" button to start or pause playback. To play cassettes, press the "Tape" button and insert a cassette into the cassette slot. Press the "Play" button on the cassette player to start playback.

4. Using the FM Radio

1. Press the "FM" button to switch to FM radio mode.
2. Rotate the tuning knob to find your desired radio station.
3. The LED lighting around the analog tuner will indicate the selected station.
4. Adjust the volume using the volume knob.

5. Connecting to Bluetooth

1. Press the "Bluetooth" button on the record player.
2. Enable Bluetooth on your smart device and search for available devices.
3. Select "Victrola" from the list of available devices to connect.
4. Once connected, play music from your smart device, and it will stream through the record player's speakers.

6. Connecting External Devices

To connect external devices, such as a smartphone or MP3 player, use the 3.5mm aux-in jack. Connect one end of a 3.5mm audio cable (not included) to your device's headphone jack and the other end to the aux-in jack on the record player.

7. Troubleshooting Tips

If you experience any issues with your Victrola 6-in-1 Record Player, try the following troubleshooting tips:

• Ensure the power cord is securely plugged into a wall outlet.
• Check that the selected function (turntable, CD, cassette, FM radio, or Bluetooth) is correct.
• If the turntable is skipping, try adding a small weight (such as a nickel) to the tonearm to improve stability.
• For Bluetooth connectivity issues, ensure your smart device is within range and that Bluetooth is enabled.
• If the sound quality is poor, consider connecting external speakers for improved audio.

8. Frequently Asked Questions

Can I connect external speakers to the Victrola 6-in-1 Record Player?

Yes, you can connect external speakers using the RCA output on the back of the unit.

Can I connect my smart device to the record player using Bluetooth?

Yes, the Victrola 6-in-1 Record Player features Bluetooth connectivity, allowing you to stream music from your smart device without any wires.

Can I play 45 RPM records on this record player?

Yes, the turntable supports 33 1/3, 45, and 78 RPM records. A 45 RPM adapter is included for playing 45 RPM records.

Does the record player have a headphone jack?

Yes, the Victrola 6-in-1 Record Player includes a headphone jack for private listening.

Can I close the lid while playing a record?

Yes, you can close the lid to keep dust out while still playing your vinyl records.

Q: What are the features of the Victrola 6-in-1 Wood Bluetooth Mid Century Record Player?
A: The Victrola 6-in-1 Wood Bluetooth Mid Century Record Player features a 3-speed turntable, Bluetooth connectivity, CD player, cassette player, FM radio, and 3.5mm aux-in. It also has a classic FM radio with an analog tuner and "around the dial" LED lighting, built-in stereo speakers, RCA output, and headphone jack.

Q: What are the dimensions and weight of the product?
A: The product dimensions are 20.4 x 18.4 x 10.4 inches and it weighs 19.8 pounds.

Q: Does this unit come with a 45 rpm adapter?
A: Yes, it does come with a 45 rpm adapter.

Q: Can I connect this to external Bluetooth speakers?
A: No, you cannot connect the device itself to external Bluetooth speakers. However, you can play music wirelessly from your phone through the unit. It does have a headphone and RCA out connections.

Q: Does the arm automatically return?
A: No, the arm does not automatically return on its own.

Q: Can I pause a CD and come back to it later?
A: Yes, you can pause a CD and come back to it later.

Q: What kind of power source does it use?
A: The Victrola 6-in-1 Wood Bluetooth Mid Century Record Player uses AC power as its power source.

Q: Does it have a cassette player?
A: Yes, it has a cassette player on the right side of the product.

Q: Can I connect an external amplifier to this unit?
A: Yes, you can connect an external amplifier to this unit using the LINE OUT RCA jacks on the rear.

Q: Does the lighting around the dial stay on all the time or only when it’s in use?
A: The dial lights are only lit when the unit is on.

Q: What is the weight of the product?
A: The weight of the product is 19.8 pounds.

Q: Can this unit play MP3 CDs or CDRs?
A: Yes, it can play MP3 CDs and CDRs.

Q: Is there a counterweight on the arm?
A: There isn't much of a counterweight on the arm, and it doesn't appear adjustable either.

Q: What kind of motor does it have?
A: It has an AC motor.

Q: What is the best way to play FM, phono, CD without moving the dial to aux when an external amp is connected?
A: The 3.5mm AUX-IN jack on the front is to connect a portable device to play music files that have been downloaded to a smart phone or tablet. The LINE OUT RCA jacks on the rear are for connection to, for example, a tape recorder. Line out is at a fixed level, independent of the volume control and is not suitable, nor recommended, for connection to an amplifier unless it has its own volume control.