Klipsch RP-500SA Dolby Atmos Surround Sound Speakers User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Switching between Dolby Atmos and Surround Sound Modes
6. Mounting the Speakers
7. Troubleshooting Tips
8. Frequently Asked Questions

1. Introduction

Thank you for purchasing the Klipsch RP-500SA Dolby Atmos Surround Sound Speakers. These speakers are designed to deliver an immersive listening experience by leveraging Klipsch's proprietary horn-loaded controlled directivity technology. This user manual will guide you through the setup and proper usage of your new speakers.

2. Package Contents

• 2 x Klipsch RP-500SA Dolby Atmos Surround Sound Speakers
• 2 x Removable Magnetic Grilles
• User Manual

3. Speaker Placement

The RP-500SA speakers can be used as up-firing immersive speakers for Dolby Atmos, as height speakers, or as rear surround speakers. For the best listening experience, place the speakers at ear level or higher, angled towards the listening position.

4. Connecting the Speakers

Connect the speaker wires from your amplifier or receiver to the binding posts on the back of the RP-500SA speakers. Make sure to match the positive (+) and negative (-) terminals on both the speakers and the amplifier or receiver.

5. Switching between Dolby Atmos and Surround Sound Modes

The RP-500SA features a switchable crossover that allows you to change between Atmos and Surround speaker modes. To switch between modes, locate the switch on the back of the speaker and slide it to the desired position.

6. Mounting the Speakers

The RP-500SA speakers can be mounted on the wall using the keyhole mounting system. To mount the speakers, follow these steps:

1. Choose a suitable location for the speakers, ensuring they are angled towards the listening position.
2. Mark the wall where the keyhole mounting points will be placed.
3. Install appropriate wall anchors and screws, leaving enough space for the speaker to slide onto the screw head.
4. Slide the keyhole mounting points on the back of the speaker onto the screws.

7. Troubleshooting Tips

• If you experience a lack of sound from the RP-500SA speakers, check that the speaker wires are properly connected to both the speakers and the amplifier or receiver.
• Ensure the switch on the back of the speaker is set to the correct mode (Atmos or Surround) for your desired usage.
• Check your amplifier or receiver settings to ensure the correct speaker configuration is selected.
• Try adjusting the volume levels of the height channels on your amplifier or receiver to ensure they are not being drowned out by the other speakers in your system.

8. Frequently Asked Questions

Can the RP-500SA speakers be used with any brand of amplifier or receiver?

Yes, the Klipsch RP-500SA speakers can be used with any brand of amplifier or receiver that supports Dolby Atmos or surround sound speaker configurations.

Do I need special speaker wires to connect the RP-500SA speakers?

No, you can use any standard speaker wires to connect the RP-500SA speakers to your amplifier or receiver.

Can I use the RP-500SA speakers as front or rear surround speakers?

Yes, the RP-500SA speakers can be used as front, rear, or side surround speakers by switching the crossover setting on the back of the speaker to "Surround."

How do I clean and maintain the RP-500SA speakers?

To clean the speakers, use a soft, dry cloth to gently wipe away dust and dirt. Avoid using harsh chemicals or abrasive materials that may damage the speaker's finish.

Q: What are the Klipsch RP-500SA Dolby Atmos Surround Sound Speakers?
A: The Klipsch RP-500SA Dolby Atmos Surround Sound Speakers are an enhanced version of the company’s award-winning Reference Premiere series speakers. They feature the latest technological audio advancements, premium material upgrades, and dramatic cosmetic details. These speakers enhance your home theater system with the incredible, overhead sound effects of the Klipsch RP-500SA Dolby Atmos speaker.

Q: How do I use the Klipsch RP-500SA Dolby Atmos Surround Sound Speakers?
A: The RP-500SA can be used as an up-firing immersive speaker for Dolby Atmos Technology, a height speaker or a rear surround model all with the flip of a switch. Add to any monitor or tower speaker or use as surround speakers for a hemisphere of rich, detailed sound.

Q: What are the features of the Klipsch RP-500SA Dolby Atmos Surround Sound Speakers?
A: The features of the Klipsch RP-500SA Dolby Atmos Surround Sound Speakers include 1” Titanium LTS Vented Tweeters with Hybrid Tractrix Horns, 5.25" Spun Copper Cerametallic Woofers, Switchable Crossover Setting for Dolby Atmos or Surround Sound, Keyhole Mounting for On-Wall Elevation/Surround Sound, Premium Scratch Resistant Finish, and Strong, Flexible Removable Magnetic Grille.

Q: What is Dolby Atmos?
A: To put it simply, Dolby Atmos is the greatest advancement in home and cinema audio since surround sound. The addition of elevation speakers reflects sound from the ceiling to put sound anywhere in your room - making you feel like you’re truly in the middle of the action.

Q: How do I wire these up as atmos up firing on top of existing front tower speakers?
A: You need at least a 7.1 receiver, to set up Dolby Atmos 5.1.2, or 5.2.2. My Denon has a set up option under amplifiers to where you switch the rear channel to height. Hook up your front placement atmos speakers to that rear output. Either on top or next to your tower speakers, or whatever you’re using for your front left and right. Use the microphone to set up your speakers if you have a Denon. And then run test tone to make sure when it gets to the rear speakers it’s actually firing your front Atmos speakers.

Q: How far do I have to sit from these if they are height mounted to gain the effect?
A: If you are using them as height channels, you can generally mount them as high up on the wall as you like. Dolby themselves say the speaker should be at an angle 30 to 45 degrees above listening position. Eight or nine feet up the wall should suffice.

Q: Can I hang these on the wall as rear speakers in a 5.1 system?
A: Yes, there is a switch on the bottom of the speaker. You can set it for Atmos setup or for regular surround system. There is a keyhole slot on back to hang the speakers on your wall.

Q: What is the difference between these RP-500SA and the RP-500SA II?
A: The RP-500 SA - II has an updated woofer driver and larger horn.

Q: For best quality of Dolby Atmos do you recommend this RP-500SA or the ceiling R5650WII?
A: If you have the ability to install ceiling speakers that would be best.

Q: Could you specify the package dimensions?
A: The RP-500SA box dimensions are Width 17.72 Inches Depth 16.14 Inches Height 11.02 Inches.

Q: Any substantial difference between R-41SA at Amazon and this pair?
A: There is a bit smoother high frequency and lower frequencies with the larger driver, but the driver materials on the RP-500SA match better with the Reference Premier series speakers where the R-41SA is a better sonic match to the F-200.