Klipsch RP-8000F Reference Premiere Floorstanding Speaker User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Bi-wiring and Bi-amping
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Welcome to the world of Klipsch RP-8000F Reference Premiere Floorstanding Speakers! These speakers deliver incredible cinematic sound by leveraging our proprietary Tractrix horn-loaded technology and dual 8" copper-spun Cerametallic woofers. This user manual will guide you through the setup and usage of your new speakers.

2. Package Contents

• Klipsch RP-8000F Reference Premiere Floorstanding Speaker (1 unit)
• Removable Magnetic Grille
• User Manual

3. Speaker Placement

For optimal performance, place the speakers at least 2 feet away from any walls and at least 6 feet apart. Position the speakers so that their tweeters are at ear level when seated in the listening area. Experiment with the toe-in angle (the angle at which the speakers are pointed toward the listener) to find the best imaging and soundstage for your room.

4. Connecting the Speakers

1. Turn off your amplifier or receiver before making any connections.
2. Remove the plastic caps from the binding posts on the back of the speaker.
3. Strip approximately 1/2 inch of insulation from the ends of your speaker wire.
4. Insert the stripped end of the wire into the hole in the binding post, making sure to connect the positive (+) terminal on the speaker to the positive (+) terminal on the amplifier, and the negative (-) terminal on the speaker to the negative (-) terminal on the amplifier.
5. Tighten the binding post by turning it clockwise until the wire is securely held in place.
6. Repeat steps 2-5 for the other speaker.
7. Turn on your amplifier or receiver and play some music to test the connections.

5. Bi-wiring and Bi-amping

Your Klipsch RP-8000F speakers feature dual binding posts, allowing for bi-wiring or bi-amping. Bi-wiring uses separate cables for the high-frequency and low-frequency drivers, while bi-amping uses separate amplifiers for the high-frequency and low-frequency drivers. To bi-wire or bi-amp your speakers, follow these steps:

1. Remove the metal jumper bars connecting the two sets of binding posts on the back of the speaker.
2. For bi-wiring, connect one set of speaker cables to the top binding posts (for the high-frequency driver) and another set of cables to the bottom binding posts (for the low-frequency driver). Connect the other ends of the cables to the corresponding terminals on your amplifier or receiver.
3. For bi-amping, connect one amplifier to the top binding posts (for the high-frequency driver) and another amplifier to the bottom binding posts (for the low-frequency driver).
4. Make sure to maintain proper polarity (+ to + and - to -) when connecting the cables.

6. Troubleshooting Tips

• If there is no sound or weak sound from the speakers, check that all connections are secure and that the amplifier or receiver is turned on and set to the correct input.
• If the sound is distorted or unclear, check that the speaker wire is not frayed or damaged and that the connections are secure.
• If the bass response is weak, try adjusting the speaker placement, toe-in angle, or room acoustics (adding rugs, curtains, or other soft materials to absorb reflections).

7. Frequently Asked Questions

Do I need a subwoofer with the Klipsch RP-8000F speakers?

While the RP-8000F speakers deliver impressive bass performance on their own, adding a subwoofer can enhance the overall low-frequency impact and provide a more immersive home theater experience.

What type of amplifier or receiver should I use with these speakers?

The Klipsch RP-8000F speakers can be used with a wide range of amplifiers and receivers. Look for a model that provides at least 150 watts per channel and has a compatible impedance rating (typically 8 ohms).

How do I clean the speakers?

Use a soft, dry cloth to gently clean the speaker cabinet and grille. Avoid using water or cleaning solutions, as they may damage the finish.

Q: What is the output wattage of the Klipsch RP-8000F floorstanding speaker?
A: The output wattage of the Klipsch RP-8000F floorstanding speaker is 150 watts.

Q: Does this speaker have a hybrid tractrix horn technology?
A: Yes, the Klipsch RP-8000F floorstanding speaker features hybrid tractrix horn technology.

Q: How many woofers does this speaker have?
A: The Klipsch RP-8000F floorstanding speaker has dual 8" spun copper cerametallic woofers.

Q: Can this speaker be bi-wired or bi-amped?
A: Yes, the Klipsch RP-8000F floorstanding speaker has dual binding posts for bi-wire/bi-amp.

Q: What is the special feature of the tweeter in this speaker?
A: The titanium tweeter diaphragm's light weight yet rigid composition exceeds the performance of aluminum, polymer or silk tweeters. It also has a vented design to reduce standing waves behind the tweeter diaphragm for a smoother high frequency reproduction.

Q: What is the recommended amplifier power for this speaker?
A: The Klipsch RP-8000F floorstanding speaker has a minimum power rating of 120 Watts per channel at 8 Ohms. It is recommended to have a receiver with a minimum output of 100w per channel.

Q: Is the price listed for one or a pair of speakers?
A: The price listed is for one Klipsch RP-8000F Reference Premiere Floorstanding Speaker - Each (Ebony).

Q: What is the weight and dimensions of this speaker?
A: The Klipsch RP-8000F floorstanding speaker weighs 60 pounds and has dimensions of 10 x 18 x 43 inches.

Q: Does Klipsch offer repair/installation services for their speakers?
A: It is recommended to contact Klipsch directly to inquire about repair or installation services.

Q: Can this speaker be used with a 90W per channel amp?
A: Yes, the Klipsch RP-8000F floorstanding speaker can be used with a 90W per channel amp, but it may not provide optimal performance. It is recommended to have a minimum of 120 Watts per channel at 8 Ohms for this model.