Klipsch RP-402S Reference Premiere Surround Speakers User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Speaker Placement
4. Connecting the Speakers
5. Speaker Break-in Period
6. Troubleshooting Tips
7. Frequently Asked Questions

1. Introduction

Welcome to the world of Klipsch RP-402S Reference Premiere Surround Speakers. These speakers are designed to provide you with an immersive home theater experience, utilizing the latest Klipsch acoustic technologies. In this user manual, we will guide you through the process of setting up and using your new speakers.

2. Package Contents

• 2 x Klipsch RP-402S Reference Premiere Surround Speakers
• 2 x Removable Grilles
• User Manual

3. Speaker Placement

Proper speaker placement is crucial for achieving the best surround sound experience. The RP-402S speakers should be placed on the side walls of your listening area, slightly above ear level when seated. Make sure the speakers are angled towards the listening position for optimal performance. If wall mounting is not possible, consider using speaker stands.

4. Connecting the Speakers

1. Turn off your audio system before connecting the speakers.
2. Locate the speaker terminals on the back of each RP-402S speaker. There are two sets of terminals, one for the left channel and one for the right channel.
3. Connect speaker wires to the speaker terminals, ensuring that the positive (+) and negative (-) terminals on the speaker match the corresponding terminals on your audio system or receiver.
4. Tighten the terminal screws to secure the speaker wires in place.
5. Repeat the process for the other speaker.

5. Speaker Break-in Period

It is recommended to allow your new speakers to "break-in" for approximately 20-40 hours of listening at moderate volume levels. This will allow the speaker components to settle and provide optimal performance.

6. Troubleshooting Tips

1. If you experience no sound or weak sound from the speakers, ensure that all connections are secure and that the audio system is turned on and set to the correct input.
2. If the sound is distorted or unclear, check the speaker wire connections and ensure that the positive and negative terminals are correctly connected.
3. If you experience audio issues only with certain content or sources, try adjusting the audio settings on your audio system or receiver.

7. Frequently Asked Questions

1. Q: Can I use the Klipsch RP-402S speakers as front speakers in my home theater setup?
   A: While the RP-402S speakers are designed primarily for surround sound applications, they can be used as front speakers if desired. However, for optimal performance, it is recommended to use dedicated front speakers from the Klipsch Reference Premiere series.
2. Q: Are these speakers compatible with any audio system or receiver?
   A: The Klipsch RP-402S speakers are compatible with most audio systems and receivers that support wired speaker connections. Ensure that your audio system or receiver can provide sufficient power to drive the speakers for optimal performance.
3. Q: Do I need a separate subwoofer with these speakers?
   A: While the RP-402S speakers provide excellent low-frequency performance, adding a dedicated subwoofer will enhance the overall bass response and create a more immersive home theater experience.
4. Q: Can I wall-mount the Klipsch RP-402S speakers?
   A: Yes, the RP-402S speakers can be wall-mounted using appropriate mounting hardware (not included). Ensure that the mounting hardware can support the weight of the speakers and follow the manufacturer's instructions for installation.

Product FAQ:

Q: What are the dimensions of the Klipsch RP-402S Reference Premiere Surround Speakers?
A: The dimensions of these speakers are 14 x 9 x 13 inches, and they weigh 13 pounds each.

Q: Can these speakers be mounted on the wall or ceiling?
A: Yes, the RP-402S speakers have both a keyhole mount and a threaded port for standard wall mounts. They can also be mounted close to the ceiling if securely mounted and toed in towards the listening position.

Q: Do these speakers require a wireless power supply or can they be wired directly to a receiver?
A: The RP-402S speakers are passive, non-powered surround speakers that need to be connected via speaker wire. They do not require a wireless power supply.

Q: Are these speakers suitable for Dolby Atmos?
A: No, the RP-402S speakers are designed as 7.1 side wall mounted surrounds and are not suitable for Dolby Atmos. Upward firing or in-ceiling speakers are needed for Dolby Atmos.

Q: What is the difference between the RP-402S and RP-502S?
A: The main difference between these two models is the size of the woofer and power handling. The RP-502S has larger woofers and can handle more power than the RP-402S.

Q: Are these speakers sold as a pair or individually?
A: These speakers are sold as a pair.

Q: What kind of speaker stands fit these speakers?
A: The Pangea Audio LS300 Speaker Stand - Pair (36 Inch) is a recommended option that looks great and is very sturdy.

Q: What kind of screws are needed to hold up one speaker?
A: A single wood screw inserted into a stud in the wall should be able to hold the speaker via the keyhole mount. For further questions, please reach out to Klipsch Support.

Q: Why is there a price difference between the ebony and walnut finishes?
A: The price difference may be due to the cost of materials used for each finish. However, prices may also vary during sales and promotions.

Q: Are these speakers suitable for a smaller room?
A: Yes, these speakers are suitable for a smaller room and can be paired with a subwoofer for added bass.