Audio-Technica AT-LP60X-BK Fully Automatic Belt-Drive Stereo Turntable User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Assembly and Setup
4. Operating Instructions
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Welcome to the world of high-fidelity audio with the Audio-Technica AT-LP60X-BK Fully Automatic Belt-Drive Stereo Turntable. This user manual will guide you through the assembly, setup, and operation of your new turntable, ensuring a seamless and enjoyable vinyl listening experience.

2. Package Contents

• Audio-Technica AT-LP60X-BK Turntable
• Detachable RCA output cable (3.5 mm male to dual RCA male)
• 45 RPM adapter
• Removable hinged dust cover
• AC adapter

3. Assembly and Setup

1. Place the turntable on a flat, stable surface, away from any sources of vibration or interference.
2. Connect the AC adapter to the turntable and plug it into an AC power outlet.
3. Connect the RCA output cable to the turntable's output and the other end to your audio system or powered speakers.
4. Set the built-in switchable phono pre-amplifier to either "PHONO" or "LINE" output, depending on your audio system's requirements.
5. Attach the removable hinged dust cover to the turntable.

4. Operating Instructions

1. Ensure that the turntable is connected to your audio system or powered speakers and that the power is on.
2. Select the desired speed (33-1/3 or 45 RPM) using the speed selector switch.
3. Place a vinyl record on the turntable platter, lining up the center hole with the spindle.
4. If playing a 45 RPM record, place the included 45 RPM adapter on the spindle.
5. Press the "START" button to begin playback. The tonearm will automatically move to the record's beginning and lower onto the vinyl.
6. To stop playback, press the "STOP" button. The tonearm will lift and return to its resting position.

5. Troubleshooting Tips

• If the turntable is not producing any sound, ensure that all connections are secure and that the correct input is selected on your audio system or powered speakers.
• If the turntable is producing distorted or unclear audio, check the stylus for dust or debris and clean it if necessary.
• If the turntable is experiencing speed inconsistencies, ensure that the turntable is placed on a flat, stable surface and is not subject to any vibrations or interference.

6. Frequently Asked Questions

1. Q: Can I use this turntable with passive speakers?
   A: Yes, but you will need to connect the turntable to an amplifier and use speaker wire to connect the amplifier to the passive speakers.
2. Q: Can I upgrade the cartridge on this turntable?
   A: No, the AT-LP60X-BK has an integral Dual Magnet phono cartridge with a replaceable diamond stylus (ATN3600L) that cannot be upgraded.
3. Q: Does this turntable support 78 RPM records?
   A: No, the AT-LP60X-BK only supports 33-1/3 and 45 RPM records.
4. Q: Can I connect this turntable to a computer?
   A: Yes, you can connect the turntable to a computer using an RCA to 3.5mm adapter or an external USB audio interface. However, you may need additional software for recording or playback.

Q: What is the Audio-Technica AT-LP60X-BK turntable?
A: The Audio-Technica AT-LP60X-BK is a fully automatic belt-drive stereo turntable designed for high-fidelity audio playback of vinyl records. It has two speeds, 33-1/3 and 45 RPM, and features an anti-resonance, die-cast aluminum platter and a redesigned tone arm base and headshell for improved tracking and reduced resonance. It also comes with an integral Dual Magnet phono cartridge with a replaceable diamond stylus (ATN3600L) for high-quality sound.

Q: What are the dimensions and weight of this turntable?
A: The product dimensions of the Audio-Technica AT-LP60X-BK are 14.7 x 14.1 x 3.8 inches, and it weighs 8.11 pounds.

Q: Does this turntable come with speakers?
A: No, this turntable does not come with speakers. It requires powered (active) speakers or an amplifier with passive speakers to play records.

Q: Is this turntable fully automatic?
A: Yes, this turntable is fully automatic, meaning it can queue and play the record itself with the push of one button as well as return the tonearm on its own once the record is finished playing.

Q: Can I move the tonearm manually on any setting even while on start?
A: Yes, you can move the tonearm manually on any setting, including while on start.

Q: Can I put multiple albums on at the same time?
A: No, this is a single record table. You could stack multiple records on the disc, but it may not produce optimal results.

Q: Does this model operate in 220 volts?
A: No, it operates in 120 volts.

Q: How do you connect your speakers? What type of speakers can be used?
A: You can connect your speakers using the detachable RCA output cable (3.5 mm male to dual RCA male) that comes with the turntable. You will need powered (active) speakers or an amplifier with passive speakers to use this turntable.

Q: Can you skip through songs?
A: No, this turntable does not have a feature to select songs automatically. You will need to do it manually.

Q: Is this turntable compatible with Bluetooth?
A: No, this turntable is not compatible with Bluetooth.

Q: Can I upgrade the cartridge on this turntable?
A: No, the cartridge on this turntable is integral and cannot be upgraded.

Overall, the Audio-Technica AT-LP60X-BK is a great entry-level turntable for those who want to enjoy high-fidelity audio playback of vinyl records without breaking the bank. It has a sleek design, easy operation, and produces excellent sound quality. However, it does require additional equipment such as powered speakers or an amplifier with passive speakers to function properly.