Edifier P17 Passive Bookshelf Speakers User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setup and Installation
4. Connecting to an Amplifier or Receiver
5. Wall Mounting
6. Troubleshooting Tips
7. Frequently Asked Questions
8. Warranty Information

1. Introduction

Thank you for purchasing the Edifier P17 Passive Bookshelf Speakers. These 2-way speakers are perfect for 5.1, 7.1, or 11.1 side/rear surround setup and require an amplifier or receiver to operate. This user manual will guide you through the setup, installation, and usage of your new speakers.

2. Package Contents

• 2 x Edifier P17 Passive Bookshelf Speakers
• 1 x Speaker Wire
• 1 x User Manual

3. Setup and Installation

Place the speakers on a stable, flat surface or mount them on the wall using the built-in wall-mount bracket. Ensure that the speakers are positioned at an appropriate distance from each other and at the desired height for optimal sound quality.

4. Connecting to an Amplifier or Receiver

1. Turn off your amplifier or receiver before connecting the speakers.
2. Connect the included speaker wire to the speaker terminals on the back of each speaker. Ensure that the positive (+) and negative (-) terminals on the speaker match the corresponding terminals on the amplifier or receiver.
3. For bare wire connections, insert the exposed end of the wire into the terminal and tighten the terminal screw. For banana plug connections, insert the plug into the terminal.
4. Turn on your amplifier or receiver and adjust the volume, bass, and treble settings to your preference.

5. Wall Mounting

The Edifier P17 speakers come with built-in wall-mount brackets, allowing you to easily hang them on the wall as side or rear surround speakers. To mount the speakers, follow these steps:

1. Choose the desired location on the wall and mark the positions for the mounting screws.
2. Drill holes at the marked positions and insert wall anchors (not included).
3. Attach the speakers to the wall using appropriate screws (not included) through the built-in wall-mount brackets.
4. Ensure that the speakers are securely mounted before connecting the speaker wires.

6. Troubleshooting Tips

• If there is no sound or weak sound from the speakers, check the connections between the speakers and the amplifier or receiver. Ensure that the positive (+) and negative (-) terminals are correctly connected.
• If the sound quality is poor, adjust the volume, bass, and treble settings on your amplifier or receiver. Also, make sure the speakers are placed at an appropriate distance from each other and at the desired height for optimal sound quality.
• If the speakers are not producing any bass, ensure that the bass reflex port on the back of the speakers is not blocked.

7. Frequently Asked Questions

Q: Do these speakers require an amplifier or receiver to operate?

A: Yes, the Edifier P17 Passive Bookshelf Speakers require an amplifier or receiver to power them.

Q: Can these speakers be used as front speakers in a home theater setup?

A: Yes, the Edifier P17 speakers can be used as front speakers, but they are designed primarily for use as side or rear surround speakers in a 5.1, 7.1, or 11.1 setup.

Q: Are these speakers waterproof?

A: No, the Edifier P17 speakers are not waterproof.

8. Warranty Information

The Edifier P17 Passive Bookshelf Speakers come with a 2-year warranty in the USA and Canada. This warranty covers parts and labor for hassle-free repairs and replacements. For more information, please refer to the warranty card included with your purchase.

Q: What is required to operate the Edifier P17 Passive Bookshelf Speakers?
A: An amplifier or receiver is required to power these speakers. Bare wire or banana inputs are available and speaker wires are included.

Q: What is the driver used in these speakers?
A: The Edifier P17 uses a 4-inch Nomax diaphragm driver and a bass reflex port for deep and punchy bass response. The impedance is 6 ohms.

Q: Can these speakers be mounted on walls?
A: Yes, the Edifier P17 has built-in wall mounts, making them perfect for hanging on walls as side or rear surround speakers for a 5.1, 7.1, or 11.1 setup.

Q: What type of tweeters do these speakers have?
A: The Edifier P17 uses high-quality 19mm (3/4 inch) silk dome tweeters that reproduce crisp clear treble with much detail.

Q: Is there a warranty for the Edifier P17?
A: Yes, there is a 2-year warranty for parts and labor in the USA and Canada.

Q: What are the dimensions and weight of the Edifier P17?
A: The product dimensions are 6.61 x 5.04 x 9.37 inches, and it weighs 9.46 pounds.

Q: Can these speakers be used for surround sound systems?
A: Yes, the Edifier P17 is recommended for surround sound systems.

Q: Is Bluetooth available on these speakers?
A: No, Bluetooth is not available on the Edifier P17. However, it has RCA, optical, COAX, and XLR audio inputs.

Q: Can these speakers be used as a center channel or subwoofer?
A: The Edifier P17 is not a subwoofer and comes as a pair of speakers. It may be used as a center channel depending on the receiver.

Q: Do these speakers come as a pair?
A: Yes, the Edifier P17 comes as a pair of speakers.

Q: Is an amplifier or receiver required to use these speakers?
A: Yes, an amplifier or receiver is required to use the Edifier P17 since they are passive speakers.

Q: What is the price of the Edifier P17?
A: The price of the Edifier P17 is $129 for both speakers.