Pyramid-PSV150 Desktop Bench Power Supply User Manual

Introduction

The Pyramid-PSV150 Desktop Bench Power Supply is an AC-to-DC power converter designed to provide a constant source of DC voltage for various electronic devices. It features a USB charge port, vehicle cigarette lighter socket (12 Amp), and universal screw connection terminals, making it compatible with a wide range of devices and equipment. This power supply is perfect for use with cellular phones, CB radios, scanners, HAM radios, and more.

Package Contents

• 1 x Pyramid-PSV150 Desktop Bench Power Supply
• 1 x User Manual

Specifications

Instructions for Use

1. Place the Pyramid-PSV150 Desktop Bench Power Supply on a stable, flat surface.
2. Connect the power supply to a 115/230 Volt AC power source using the included power cable.
3. Switch the voltage selector on the back of the power supply to the appropriate voltage (115V or 230V) for your region.
4. Turn on the power supply by pressing the LED backlit ON/OFF switch located on the front panel.
5. Connect your device to the power supply using one of the following methods:
   • For devices with a cigarette lighter plug, insert the plug into the vehicle cigarette lighter socket (12 Amp).
   • For devices requiring a USB power source, connect a compatible USB cable to the USB charge port.
   • For devices with screw-type terminals, connect the positive and negative wires to the corresponding terminals on the power supply.
6. Ensure that your connected device is operating as expected. If not, refer to the troubleshooting section below.
7. When finished using the power supply, turn it off using the ON/OFF switch and disconnect your device.

Troubleshooting Tips

1. If your device is not receiving power from the Pyramid-PSV150, ensure that the power supply is properly connected to a compatible AC power source and that the voltage selector is set to the correct voltage.
2. Ensure that the ON/OFF switch is in the ON position and that the LED indicator is illuminated.
3. Check the connections between your device and the power supply. Ensure that the appropriate connection method is being used and that all connections are secure.
4. If your device is still not receiving power, try connecting a different device to the power supply to determine if the issue is with the power supply or the original device.
5. If the power supply is generating excessive heat or noise, turn it off immediately and allow it to cool down before attempting to use it again.
6. If you continue to experience issues with the Pyramid-PSV150, contact Pyramid customer support for further assistance.

FAQ

Q: Can the Pyramid-PSV150 power a device that requires more than 12 Amps?

A: The Pyramid-PSV150 is designed to provide a constant amperage of up to 12 Amps. It may not be suitable for devices that require more than 12 Amps of power. Always check the power requirements of your device before connecting it to the power supply.

Q: Why is my iPhone not charging when connected to the USB port?

A: Ensure that you are using a compatible USB cable and that the power supply is turned on. If your iPhone still does not charge, try connecting a different USB device to the power supply to determine if the issue is with the USB port or the iPhone.

Q: Can I use the Pyramid-PSV150 to power an HF transceiver?

A: The Pyramid-PSV150 can be used to power a variety of devices, including HF transceivers. However, some users have reported RF noise issues when using the power supply with HF transceivers. If you experience RF noise, you may need to consider a different power supply specifically designed for communications equipment.

Q: Does the Pyramid-PSV150 have overload and short-circuit protection?

A: Yes, the Pyramid-PSV150 is equipped with built-in electronic overload and short-circuit protection to ensure the safety of the operator and any connected electronics.

Q: How do I switch between 115V and 230V input voltage?

A: The Pyramid-PSV150 has a voltage selector switch located on the back of the power supply. Simply slide the switch to the desired voltage (115V or 230V) before connecting the power supply to an AC power source.

Q: What is the Pyramid-PSV150 Desktop Bench Power Supply?
A: The Pyramid-PSV150 Desktop Bench Power Supply is an AC-to-DC power converter with a USB charge and vehicle cigarette lighter socket. It has a 12 Amp capacity and is designed for use with cellular phones, CB radio, scanner, HAM radio, etc.

Q: What are the features of the Pyramid-PSV150 Desktop Bench Power Supply?
A: The Pyramid-PSV150 Desktop Bench Power Supply features a cigarette lighter socket, USB and screw-type terminals, plug-in operation, short-circuit protection, and a built-in cooling fan.

Q: What is the output voltage of the Pyramid-PSV150 Desktop Bench Power Supply?
A: The output voltage of the Pyramid-PSV150 Desktop Bench Power Supply is 13.8 volts.

Q: What is the amperage capacity of the Pyramid-PSV150 Desktop Bench Power Supply?
A: The Pyramid-PSV150 Desktop Bench Power Supply has a maximum amperage capacity of 12 amps.

Q: Does the Pyramid-PSV150 Desktop Bench Power Supply have surge protection?
A: The Pyramid-PSV150 Desktop Bench Power Supply has surge protection of up to 5 amps.

Q: Can this power supply be used for marine VHF radios?
A: Yes, as long as the radio's amperage draw when transmitting does not exceed 9.6 amps.

Q: Is there a warranty for the Pyramid-PSV150 Desktop Bench Power Supply?
A: Yes, there is a one-year warranty for this product.

Q: Can I contact technical support if I have concerns about my product?
A: Yes, you can call 718 535 1800 Press 2 then 1 from Monday to Friday from 9 AM to 5 PM EST for technical support.