InnoGear Adjustable Mic Stand for Blue Snowball and Blue Snowball iCE User Manual
Package Contents
- 1 x Microphone Stand
- 1 x Pop Filter
- 1 x Windscreen for Blue Snowball and Blue Snowball iCE
- 1 x Table Mounting Clamp
- 1 x Microphone Clip
- 1 x Metal Microphone Screw
- 1 x Connection Adapter
Assembly and Installation
- Attach the table mounting clamp to the edge of your desk. Ensure the clamp is tight and secure by adjusting the positioning screw. The sponge pad on the clamp will protect your desk from scratches.
- Insert the bottom end of the microphone stand into the clamp and tighten the side screw to secure it in place.
- Adjust the suspension boom scissor arm stand to your desired angle and height. The arms can be extended in 135° back and forth, and 180° up and down.
- Attach the microphone clip to the top end of the microphone stand using the metal microphone screw. If you are using a Blue Yeti, Blue Snowball, or Blue Yeti Nano, use the included 3/8" to 5/8" screw adapter.
- Place your microphone into the microphone clip, ensuring it is secure and stable.
- Attach the pop filter to the microphone stand by clamping it onto the boom arm. Adjust the gooseneck of the pop filter to position it in front of the microphone.
- Slide the windscreen onto your Blue Snowball or Blue Snowball iCE microphone, ensuring a snug fit.
Troubleshooting Tips
- If the microphone stand is unable to hold the weight of your microphone, adjust the spring to the second hole to increase its bearing capacity.
- If the pop filter is not staying in place, try tightening the screw holding the pop filter. If the issue persists, consider purchasing a separate pop filter with a more robust gooseneck.
- If the threads on the microphone clip or screw adapter are not tight enough, use the included thread tape to improve the fit.
Frequently Asked Questions
Q: Can this stand support heavier microphones like the Blue Yeti?
A: Yes, this stand can support the Blue Yeti and other similar microphones. Use the included 3/8" to 5/8" screw adapter to attach the microphone to the stand. If necessary, adjust the spring to the second hole to increase the stand's bearing capacity.
Q: Is the pop filter compatible with other microphones?
A: The included pop filter is designed to work with most microphones. However, its effectiveness may vary depending on the size and shape of the microphone.
Q: How do I clean the windscreen?
A: To clean the windscreen, gently remove it from the microphone and wash it with mild soap and water. Allow it to air dry completely before reattaching it to the microphone.
Q: Can the stand be used with a webcam or other devices?
A: This stand is primarily designed for use with microphones. However, it may be compatible with some webcams, cellphones, tablets, and ring lights if the appropriate attachments are used.
FAQ [continued]
Q: What is included in the InnoGear Adjustable Mic Stand package?A: The package includes an adjustable microphone stand, a pop filter, and a windscreen for Blue Snowball and Blue Snowball iCE.
Q: Is the windscreen made of high-quality material?
A: Yes, the windscreen is made of high-density acoustic foam material that is durable and elastic.
Q: How strong is the construction of the mic stand?
A: The mic stand has a heavy-duty construction with a super-strong spring that protects the microphone from shaking, dropping, and making noise.
Q: Is the pop filter double-layered?
A: Yes, the pop filter is double-layered to effectively dissipate air and reduce velocity for clean vocal recording.
Q: Is this mic stand compatible with other microphones besides Blue Snowball and Blue Snowball iCE?
A: Yes, it comes with a screw adapter that fits most microphones. However, it also includes an adapter specifically for Blue Yeti, Blue Snowball, and Blue Yeti Nano.
Q: Can this mic stand swivel?
A: Yes, the arm can swivel 180 degrees if the screw that keeps it in place is left a little loose.
Q: How long is the arm of the mic stand?
A: The arm is about 35 inches long.
Q: Is this mic stand suitable for Tonor TC77?
A: It will be compatible with the silver adaptor. After screwing the adaptor to the mic mount, then you can install it on boom arm. Check for the foam cover before you make a decision.
Q: Does this mic stand work with Razer Seiren X or Razer Siren Elite?
A: It works with Razer Seiren Mini with 3/8 to 5/8 adapter in the product image. However, it may not work with Razer Seiren X or Razer Siren Elite.
Q: What is the weight and size of the InnoGear Adjustable Mic Stand?
A: The item weighs 1.68 pounds, and the package dimensions are 16.85 x 6.54 x 2.56 inches. The size is medium, and the material is sponge and foam.
Q: Are there any negative reviews for this product?
A: Yes, there are some negative reviews regarding low quality and poor construction. However, there are also positive reviews that highlight the product's durability and compatibility with different microphones.
Specifications
| Brand | InnoGear |
| Model Number | MU056 |
| Category | Musical Instruments > Microphones > Accessories > Stands |
| Package Dimensions | 42.9 x 16.69 x 6.4 cm; 760 Grams |
| Item Model Number | MU056 |
| Body Material | Steel |
| Colour | Blue |
| Compatible Devices | Microphones |
| Connector | Clip, Screw |
| Material Type | Metal |
| Musical Style | Mic Stand |
| Size | Medium |
| Item Weight | 760 g |
| ASIN | B07QH554TJ |
| Customer Reviews | 4.6 4.6 out of 5 stars 7,481 ratings 4.6 out of 5 stars |
| Best Sellers Rank | 14,634 in Musical Instruments (See Top 100 in Musical Instruments) 548 in Stands |
| Date First Available | 9 April 2019 |
| Colour | Blue |
| Material | Metal |
| Item weight | 760 Grams |
| Style | Boom Arm Set |
| Color | Blue |
| Material | Metal |
| Weight | 760 g |
| First Available | 9 April 2019 |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content. By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.