User Manual

Lightimetunnel Bluetooth 5.0 Wireless 3D Sleep Headphones Eye Mask

Thank you for choosing the Lightimetunnel Bluetooth 5.0 Wireless 3D Sleep Headphones Eye Mask. Please read this user manual carefully to ensure proper use and care of your new sleep headphones eye mask.

Package Contents

• Bluetooth Sleep Eye Mask x1
• Travel Bag x1
• USB Cable x1
• User Manual x1
• TANKS Card x1

Getting Started

1. Charge the sleep headphones eye mask using the provided USB cable. Connect the cable to the charging port on the mask and a USB power source. Charging should take approximately 2-2.5 hours.
2. Turn on the Bluetooth on your device (smartphone, tablet, etc.).
3. Press and hold the middle button on the sleep mask for 3 seconds to turn on the Bluetooth. The LED light will flash blue and red, indicating that the mask is in pairing mode.
4. On your device, search for available Bluetooth devices and select "BSE-01" from the list to connect.
5. Once connected, the LED light on the mask will turn blue, and you can now play music, make calls, and control your device using the buttons on the mask.

Button Functions

• Play/Pause: Press the middle button once.
• Volume Up: Press the "+" button.
• Volume Down: Press the "-" button.
• Next Track: Press and hold the "+" button for 2 seconds.
• Previous Track: Press and hold the "-" button for 2 seconds.
• Answer/End Call: Press the middle button once during an incoming call.
• Reject Call: Press and hold the middle button for 2 seconds during an incoming call.

Adjusting the Sleep Mask

1. Put on the sleep mask, ensuring that the Bluetooth control module is in the middle of your forehead.
2. Adjust the length of the strap to fit your head comfortably.
3. Adjust the nose flap to fit the bridge of your nose.
4. To achieve 100% light blockage, pull down the nose flap and lift it up, then adjust the position as needed.

Washing Instructions

1. Remove the Bluetooth module and wires from the sleep mask.
2. Hand wash the mask with warm water.
3. Air dry the mask before reinserting the Bluetooth module and wires.

Troubleshooting

If you experience any issues with your sleep headphones eye mask, try the following:

• Ensure the mask is fully charged.
• Check that your device's Bluetooth is turned on and within range.
• Reset the Bluetooth connection by turning off the mask and your device's Bluetooth, then turning them back on and reconnecting.

Specifications

• Brand: Lightimetunnel
• Manufacturer: LIGHTIMETUNNEL
• Model Number: BSE-01
• Product Dimensions: 24.8 x 4.33 x 0.39 inches
• Item Weight: 3.52 ounces
• Batteries: 1 Lithium Polymer batteries required

Frequently Asked Questions

Q: How do I charge the sleep headphones eye mask?

A: Use the provided USB cable to connect the charging port on the mask to a USB power source. Charging should take approximately 2-2.5 hours.

Q: Can I wash the sleep mask?

A: Yes, the sleep mask is washable. Remove the Bluetooth module and wires before washing. Hand wash the mask with warm water and air dry before reinserting the Bluetooth module and wires.

Q: How do I connect my device to the sleep headphones eye mask?

A: Turn on Bluetooth on your device, then press and hold the middle button on the mask for 3 seconds to enter pairing mode. Search for available Bluetooth devices on your device and select "BSE-01" to connect.

Q: How long does the battery last on a full charge?

A: The battery provides more than 8 hours of playing time on a full charge, allowing you to sleep peacefully all night without needing to recharge.

Q: Is the sleep mask suitable for side sleepers?

A: Yes, the sleep headphones eye mask is designed with breathable material and a comfortable fit, making it perfect for side sleepers. The Bluetooth control is located in the middle of the mask and should not cause discomfort when sleeping on your side.

Product FAQ:

Q: Does the sleep headphones wireless mask block out noise?
A: Yes, the sleep headphones wireless mask can block out noise and create an absolute dark zone for a deep sleep experience.

Q: Is the 3D contoured eye mask comfortable to wear?
A: Yes, the 3D contoured eye mask is designed to be comfortable and ergonomic, allowing for optional eye opening without disturbing makeup or causing discomfort.

Q: Can the strap be adjusted to fit most head sizes?
A: Yes, the strap can be adjusted to fit most head sizes comfortably.

Q: Is the sleep headphones mask washable?
A: Yes, the Bluetooth module and wires can be taken out from the sleep mask for washing. It is recommended to wash it by hand with warm water.

Q: Does the Bluetooth 5.0 feature provide stable connectivity and smooth transmission?
A: Yes, the updated Bluetooth 5.0 technology provides stable connectivity and smooth transmission in high speed and long distance with low consumption for a great stereo sound experience.

Q: Is the sleep headphones Bluetooth sleep mask comfortable for side sleepers?
A: Yes, it is designed with breathable material and comfortable feel, making it perfect for side sleepers.

Q: How long does the battery last?
A: The premium high-performance battery takes about 2-2.5 hours to charge and provides more than 8 hours of playing time.

Q: Does it cancel out noise?
A: No, it does not cancel out noise.

Q: Where can I find the manual for this product?
A: The manual can be found on the product website.

Q: Where do these headphones ship from?
A: They ship from wherever the buyer is located.

Q: Can this be used as an alarm with an iPhone?
A: Yes, it can be used as an alarm with an iPhone or other Bluetooth-enabled devices.