Realspace Densey Bonded Leather Mid-Back Manager's Chair User Manual

Table of Contents

1. Assembly Instructions
2. Adjustment Features
3. Cleaning and Maintenance
4. Troubleshooting Tips
5. Frequently Asked Questions

1. Assembly Instructions

Before assembling your Realspace Densey Bonded Leather Mid-Back Manager's Chair, please ensure you have all the components and hardware included in the package. Follow these steps to assemble your chair:

1. Attach the casters to the base by inserting them into the designated holes on the base.
2. Insert the gas lift cylinder into the center hole of the base.
3. Attach the seat plate to the bottom of the seat cushion using the provided screws.
4. Slide the armrests into the slots on the sides of the seat cushion and secure them with the provided screws.
5. Attach the backrest to the seat cushion by aligning the holes on the backrest with the holes on the seat cushion. Secure with the provided screws.
6. Place the assembled seat and backrest onto the gas lift cylinder.

2. Adjustment Features

Your Realspace Densey Bonded Leather Mid-Back Manager's Chair comes with the following adjustment features:

• Seat Height: To adjust the seat height, sit on the chair and pull the lever located on the right side of the seat upwards. Release the lever at the desired height.
• Tilt Tension: To adjust the tilt tension, locate the knob under the front of the seat. Turn the knob clockwise to increase tension and counter-clockwise to decrease tension.

3. Cleaning and Maintenance

Follow these guidelines to keep your Realspace Densey Bonded Leather Mid-Back Manager's Chair looking and functioning at its best:

• Regularly check all hardware and tighten any loose screws or bolts.
• Wipe the chair with a soft, damp cloth to remove dust and dirt. Avoid using abrasive cleaners or harsh chemicals on the chair.
• Keep the chair away from direct sunlight and heat sources to prevent damage to the bonded leather upholstery.

4. Troubleshooting Tips

If you encounter issues with your Realspace Densey Bonded Leather Mid-Back Manager's Chair, try the following troubleshooting tips:

• Chair wobbles or feels unstable: Check all screws and bolts to ensure they are tight. If the issue persists, inspect the casters and base for damage and replace if necessary.
• Gas lift cylinder not functioning: Ensure the chair is fully assembled and seated correctly on the gas lift cylinder. If the issue persists, consider replacing the gas lift cylinder.

5. Frequently Asked Questions

Q: What is the weight capacity of this chair?

A: The Realspace Densey Bonded Leather Mid-Back Manager's Chair has a maximum weight recommendation of 275 pounds.

Q: Is the seat material made of nylon or bonded leather?

A: The seat material is made of bonded leather, while the frame material is made of alloy steel and nylon.

Q: Can the armrests be removed or adjusted?

A: The armrests can be removed by unscrewing them from the seat cushion. However, they are not adjustable in height or width.

Product FAQ:

Q: What are the dimensions of this chair?
A: The product dimensions for the Realspace® Densey Bonded Leather Mid-Back Manager's Chair are 28.74"D x 26.38"W x 43.5"H.

Q: What is the weight capacity of this chair?
A: The maximum weight recommendation for this chair is 275 pounds.

Q: Can the armrests be removed?
A: Yes, the armrests can be removed. They are not essential to the structural integrity of the chair.

Q: Does this chair tilt or recline back?
A: Yes, there is a lever on the right-hand side under the seat that allows you to lock the chair in an upright position or to tilt or recline back.

Q: What is the material used for this chair?
A: The frame material of this chair is alloy steel and nylon, while the seat material type is nylon.

Q: Is this chair suitable for office use?
A: Yes, this chair is recommended for office use.

Q: What is the best way to clean this chair?
A: It is recommended to clean this chair with a soft cloth and mild soap solution. Avoid using abrasive materials or harsh chemicals that may damage the leather or other materials.