OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit User Manual

Package Contents

• 1 x Transmitter (TX)
• 1 x Receiver (RX)
• 2 x Power Adapters
• 2 x Antennas
• 1 x User Manual

Setup and Installation

1. Attach the antennas to the transmitter (TX) and receiver (RX) units.
2. Connect the transmitter (TX) to your amplifier/receiver's subwoofer output using an RCA cable (not included).
3. Connect the receiver (RX) to your subwoofer's input using an RCA cable (not included).
4. Plug the power adapters into the transmitter (TX) and receiver (RX) units, and then into an electrical outlet.
5. Turn on your amplifier/receiver, subwoofer, and the transmitter (TX) and receiver (RX) units.
6. If the units do not pair automatically, press the "pair" button on the receiver (RX) unit while it is near the transmitter (TX) unit.
7. Adjust the volume and phase controls on your subwoofer to achieve the desired sound.

Troubleshooting Tips

• If you experience connection issues, try moving the transmitter (TX) and receiver (RX) units closer together or repositioning the antennas.
• If you hear a constant low-level hissing noise or occasional popping sounds, try adjusting the volume levels on your amplifier/receiver and subwoofer.
• Ensure there are no other devices operating on the 5.8 GHz frequency nearby, as this may cause interference.
• If the units do not pair following the instructions provided, try placing them side by side, powering both units, and then pressing the "pair" button on the receiver (RX) unit.

Frequently Asked Questions

Can I use two subwoofers with one transmitter?

No, the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit is designed for use with one subwoofer only.

Does this kit come with the necessary RCA cables?

No, the kit does not include RCA cables. You will need to purchase two RCA cables separately to connect the transmitter (TX) to your amplifier/receiver and the receiver (RX) to your subwoofer.

Is there any delay in the transmission of the audio signal?

The OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit has an upgraded chipset that ensures reliable and instant transmission with undetectable delay.

What is the range of the wireless signal?

The wireless signal has a range of up to 150 feet (line of sight) on the 5.8 GHz frequency, which is less crowded and more reliable than the 2.4 GHz frequency used by many other wireless devices.

Can the transmitter/receiver transmit through walls and cabinets?

Yes, the transmitter/receiver can transmit through walls and cabinets, allowing you to hide the units in another room, behind a sofa, or inside a cabinet for a clean and uncluttered setup.

Q: What is the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit?
A: The OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit is a reliable digital wireless subwoofer kit that includes a transmitter and receiver, allowing you to bring the bass to any space without having to run cables.

Q: Does the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit have zero delay time?
A: Yes, the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit includes an upgraded chip set that ensures reliability and instant transmission with undetectable delay.

Q: What frequency does the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit transmit on?
A: The OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit transmits on the less crowded and more reliable 5.8GHz frequency for steady bass sound up to 150 feet (line of sight).

Q: Where can I place my subwoofer using the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit?
A: You can use the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit anywhere there is an electrical outlet, so you can place your subwoofer where it sounds best.

Q: Can I hide the transmitter/receiver of the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit easily?
A: Yes, the compact footprint of the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit lets you hide the transmitter/receiver in another room, behind a sofa, or inside a cabinet.

Q: Can I connect multiple subwoofers with additional receivers using the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit?
A: Yes, you can connect multiple receivers to the WSK-100 or WRSK-250 for multiple subwoofers and multiple speakers/sub with the WRSK-250.

Q: What types of speakers can I use with the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit?
A: The WSK-100 is only meant for subwoofers since it only has an RCA mono input/output, but the WRSK-250 can be used for either a 2.1 set up or rear surround set up.

Q: Can I mix a front speaker and a rear surround sound speaker with the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit?
A: It depends on how you connect the front speaker. If you connect it correctly, there should be no issues. However, if you plug it in the wrong way, it could cause technology issues.

Q: Is it normal for the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit to make popping noises from speakers?
A: No, the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit should not make any popping noises at all. If you experience this issue, it could be due to RF interference with something in the surrounding area.

Q: Can I use this kit with an active subwoofer and two passive rear surround sound speakers?
A: Yes, you can use this kit with an active subwoofer and two passive rear surround sound speakers.

Q: Where can I purchase a second OSD 5.8 wireless receiver for a dual sub setup?
A: You can check with OSD or eBay to purchase a second OSD 5.8 wireless receiver for a dual sub setup.

Q: Does the rear wireless receiver power the rear speakers or do I have to use powered rear speakers with this wireless kit?
A: Yes, the rear receiver powers the speakers.

Q: I get static in my rear speakers. Any thoughts?
A: These are line-of-sight devices, so any obstacles between them could likely cause loss of signal quality. Try adjusting the placement of the transmitter and receiver to see if that resolves the issue.

Overall, the OSD Wireless 5.8G Subwoofer Transmitter/Receiver Kit is a reliable and convenient solution for bringing bass to any space without the need for cables. It has a range of up to 150 feet (line of sight) and transmits on a reliable 5.8GHz frequency. It is easy to set up and can be used with multiple subwoofers and speakers. However, it may experience issues with RF interference or signal loss due to obstacles between the transmitter and receiver.