Loncaster Car Phone Holder User Manual

Product Overview

The Loncaster Car Phone Holder is a versatile, non-slip car dashboard phone mount designed to secure a wide range of smartphones and GPS devices while driving. This holder is compatible with devices that are 6-12mm thick and provides a stable platform for one-handed operation without the risk of scratching your device.

Installation Instructions

1. Ensure the dashboard surface where you intend to place the holder is flat, smooth, and clean. It should be dry and free of dust or residue.
2. Peel off the protective film from the sticky pad on the bottom of the phone holder.
3. Press the holder firmly against the designated spot on your dashboard for a few seconds to ensure a strong adhesive grip.
4. Place your smartphone or GPS device into the holder, adjusting for a secure fit if necessary.

Usage Tips

• For optimal performance, regularly clean the bottom of the car phone holder. Rinse with water and dry it to maintain the adhesive quality.
• Avoid placing the holder over dashboard surfaces that are curved, textured, or covered with materials such as a fuzzy dash cover.
• Thick phone cases, such as otterbox or cases with pop sockets, may not be compatible with this holder.

Troubleshooting Tips

• Holder Not Sticking: Clean the dashboard surface and the sticky pad with water, then dry both thoroughly before reapplying the holder.
• Phone Not Fitting: Remove any thick or bulky phone cases that may prevent the phone from fitting securely in the holder.
• Holder Losing Grip: Avoid exposing the holder to extreme temperatures which can affect the adhesive's effectiveness.

Frequently Asked Questions (FAQs)

Can I use the holder if there's a pop socket attached to my phone?

No, the holder is not compatible with phones that have a pop socket or similar accessories attached to the back.

Will the holder work with a fuzzy dash cover?

No, the holder requires a smooth, flat surface for proper adhesion and cannot grip onto a fuzzy dash cover.

Is it possible to use this holder on a curved or carpeted dashboard?

No, the adhesive requires a flat, smooth surface to function correctly. A curved or carpeted dashboard will not provide the necessary grip.

Can I move the holder between my car and home?

Yes, the holder does not use a permanent adhesive and can be moved between locations. Ensure you clean the base with water and dry it before reinstallation.

Is this holder better than magnetic or suction cup holders?

The holder is designed to be more stable and secure than magnetic or suction cup holders, especially during sudden stops or sharp turns.

Product FAQ:

Q: What devices is the Loncaster Car Phone Holder compatible with?
A: The Loncaster Car Phone Holder is suitable for all cell phone devices with a thickness between 6mm-12mm. It is compatible with iPhone 11/11 Pro/11 Pro Max/ XR/ XS/ XS Max/ X/8/8 Plus, Samsung Galaxy Note 8 /9/10 /Note 20 Ultra , S20/S9 /S10, S20 Plus / Nexus, Pixel, LG, Sony, HTC, IPAD, Huawei, Mi, and other similar devices.

Q: Can I use this car phone holder with a thick case on my device?
A: It is not recommended to use the Loncaster Car Phone Holder with thick cases, especially otterbox, life-proof, and pop socket cases. The holder works best with devices without a thick case.

Q: Will this car phone holder work on all dashboards?
A: The Loncaster Car Phone Holder is designed to work on most dashboards. However, it may not be suitable for curved surfaces or certain specific dashboards like 2016 Subaru Impreza, 2016 Nissan Frontier, Mini Cooper, 2016 Audi Q7, Honda Civic, 2009 Honda Accord, 2010 Honda CRV, 2008 Toyota Yaris, Toyota Rav 4 2018, Toyota Corolla, BMW i3, 2013 Audi A7, Scion XD, 2011 Tacoma, 2006 Jeep Wrangler, Jeep Cherokee, 2016 Nissan Sentra, 2018 Golf GTI, 2019 Prius, Ford Fiesta 2016, Hyundai Genesis Coupe, Mercedes Benz CLA 250, and Acura MDX.

Q: Is the Loncaster Car Phone Holder easy to install and operate?
A: Yes, the car phone holder is easy to mount, release, and operate with one hand. It allows for one-hand operation without causing distractions while driving.

Q: Will this car phone holder scratch or damage my device?
A: The Loncaster Car Phone Holder is designed without magnets and is made of full silicone material to avoid scratching your phone. Additionally, the gel pad is easy to clean and does not leave any residue on the dashboard.

Q: Is the Loncaster Car Phone Holder stable and slip-free?
A: Yes, the car phone holder is made of premium silicone material with non-slip technology. It holds your phone tightly, providing stability and preventing it from slipping or moving during your drive.

Q: Can I use this car phone holder with a pop socket attached to the back of my iPhone?
A: No, the car phone holder has a solid panel behind the phone when placed in the holder, so it is not compatible with a pop socket attached to the back of your iPhone.

Q: Can I use this car phone holder on a curved or carpeted dashboard navigation mat?
A: No, the car phone holder has a peel layer with adhesive on the bottom, so it cannot be placed on a curved or carpeted dashboard navigation mat.

Q: Can I remove the car phone holder from my car and use it in my house?
A: Yes, the car phone holder can be easily removed from your car as it does not permanently stick to anything. It has a washable rubber back that allows you to take it back and forth from your car to your house. It can be used repeatedly.

Q: Is this car phone holder better than a magnetic or suction holder for windows or dashboards?
A: Yes, the Loncaster Car Phone Holder is considered better than magnetic holders or suction holders for windows or dashboards. It provides a stable and secure hold for your phone in a horizontal position.