InnoGear Microphone Arm Stand User Manual

Package Contents

• 1 x InnoGear Microphone Arm Stand
• 1 x Mic Clip
• 1 x Table Clamp Base
• 5 x Cable Ties

Assembly Instructions

1. Attach the table clamp base to the edge of your desk by loosening the side screw, placing the clamp over the edge of the desk, and then tightening the screw to secure it in place. Make sure the sponge on the base is in contact with the desk to prevent scratches.
2. Insert the bottom end of the microphone arm stand into the hole on the table clamp base. Tighten the screw on the base to secure the arm stand in place.
3. Attach the mic clip to the top end of the microphone arm stand by screwing it onto the 5/8" connector.
4. Insert your microphone into the mic clip. If your microphone requires an adapter, screw the adapter onto the 5/8" connector before attaching the microphone.
5. Use the provided cable ties to organize the microphone cable along the arm stand. Place the ties between the arm sections for a neat appearance.

Adjustment Instructions

To adjust the position and angle of the microphone arm stand, simply move it up or down, left or right as needed. The arm stand has a maximum reach of 28 inches horizontally and 27 inches vertically. The internal springs and steel construction provide stability and smooth movement.

Frequently Asked Questions

• Q: Can this microphone arm stand support heavy microphones like the Blue Yeti?
  A: Yes, the InnoGear Microphone Arm Stand is designed to support microphones with a weight of up to 3.5lbs, making it suitable for heavy microphones like the Blue Yeti.
• Q: Is the stiffness of the arm stand adjustable?
  A: No, the stiffness of the arm stand is not adjustable. However, it is designed to provide a stable and secure hold for your microphone.
• Q: Will this arm stand work with other microphone brands and models?
  A: The 5/8" connector on the InnoGear Microphone Arm Stand is compatible with many microphones, including popular models like the AT2020, AT2020USB+, AT2035, ATR2500-USB, and ATR2100-USB.
• Q: Can I use this arm stand with a shock mount?
  A: Yes, you can use the InnoGear Microphone Arm Stand with a shock mount. Simply attach the shock mount to the 5/8" connector instead of the mic clip.
• Q: What is the maximum desk thickness that the table clamp base can accommodate?
  A: The table clamp base can accommodate desks with a thickness of up to 2 inches. If your desk is thicker than 2 inches, you may need to find an alternative clamp or mounting solution.

Q: What is the InnoGear Microphone Arm Stand made of?
A: The InnoGear Microphone Arm Stand is made of premium cast metal.

Q: What is the maximum weight that the InnoGear Microphone Arm Stand can hold?
A: The InnoGear Microphone Arm Stand can hold a maximum weight of 3.5lbs.

Q: What is the reach length of the InnoGear Microphone Arm Stand?
A: The InnoGear Microphone Arm Stand has a maximum reach of 28 inches horizontally and 27 inches vertically.

Q: Is the InnoGear Microphone Arm Stand compatible with Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB microphones?
A: Yes, the InnoGear Microphone Arm Stand's 5/8" connector is compatible with many microphones including Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB.

Q: Does the InnoGear Microphone Arm Stand come with cable ties?
A: Yes, the package comes with 5 cable ties to help organize your microphone cable.

Q: Is the InnoGear Microphone Arm Stand foldable?
A: Yes, the InnoGear Microphone Arm Stand is foldable which helps to free up desk space.

Q: What is the material of the table clamp base for the InnoGear Microphone Arm Stand?
A: The table clamp base for the InnoGear Microphone Arm Stand is made of plastic.

Q: Can an isolation shield be used with the InnoGear Microphone Arm Stand?
A: Yes, an isolation shield can be used with the InnoGear Microphone Arm Stand.

Q: Can the arm be removed from the clamp for the InnoGear Microphone Arm Stand?
A: Yes, the arm can be removed from the clamp for the InnoGear Microphone Arm Stand.

Q: What is the minimum size for a desk hole to use with the InnoGear Microphone Arm Stand?
A: The desk hole should be at least 0.5" in diameter for the InnoGear Microphone Arm Stand to fit.

Q: Is the InnoGear Microphone Arm Stand adjustable?
A: Yes, the InnoGear Microphone Arm Stand is adjustable and versatile, allowing for easy adjustment of position and angle.