Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Setup and Installation
4. Speaker Placement
5. Troubleshooting Tips
6. Frequently Asked Questions

1. Introduction

Congratulations on your purchase of the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair. These high-performance speakers are designed to deliver an amazing soundstage, featuring Klipsch's proprietary Tractrix horn technology, aluminum diaphragm compression driver, linear travel suspension, and IMG woofers. This user manual will guide you through the setup, installation, and optimal use of your new speakers.

2. Package Contents

• 2 x Klipsch Synergy Black Label B-100 Bookshelf Speakers
• Power cord (external wiring not included)

3. Setup and Installation

To set up and install your Klipsch Synergy Black Label B-100 Bookshelf Speakers, follow these steps:

1. Unpack the speakers and place them on a stable surface.
2. Connect the speakers to an AV receiver or amplifier using the appropriate speaker wires (not included).
3. Ensure that the speaker wires are connected to the correct terminals on both the speakers and the receiver/amplifier (red to red, black to black).
4. Plug the power cord into a power outlet.
5. Power on your receiver or amplifier and adjust the volume to a comfortable listening level.

4. Speaker Placement

Proper speaker placement is essential for optimal sound quality. Follow these guidelines for the best listening experience:

• Place the speakers at least 6-10 feet apart and at ear level when seated.
• Angle the speakers towards the listening area for a more focused soundstage.
• For surround sound setups, place the speakers to the sides or behind the listening area.
• Avoid placing the speakers in corners or close to walls, as this may negatively affect bass response.

5. Troubleshooting Tips

If you encounter any issues with your Klipsch Synergy Black Label B-100 Bookshelf Speakers, try the following troubleshooting tips:

1. Check that all connections are secure and properly connected.
2. Ensure that the receiver or amplifier is powered on and set to the correct input source.
3. Adjust the volume on your receiver or amplifier to ensure it is not muted or set too low.
4. Try connecting the speakers to a different receiver or amplifier to rule out any issues with your current setup.
5. If the issue persists, contact Klipsch customer support for further assistance.

6. Frequently Asked Questions

Q: Can these speakers be used as surround speakers?

A: Yes, the Klipsch Synergy Black Label B-100 Bookshelf Speakers can be used as front speakers or surround speakers in a home theater setup.

Q: What is the recommended power for these speakers?

A: Supplying the speakers with sufficient power is important for quality audio reproduction and longevity of the speaker's components. Ensure that your AV receiver or amplifier provides adequate power for the speakers.

Q: Do these speakers come with speaker wires?

A: No, speaker wires are not included with the Klipsch Synergy Black Label B-100 Bookshelf Speakers. You will need to purchase speaker wires separately to connect the speakers to your AV receiver or amplifier.

Q: How do I mount these speakers on a wall?

A: The Klipsch Synergy Black Label B-100 Bookshelf Speakers do not come with wall-mounting brackets. You can purchase compatible wall-mounting brackets separately and follow the manufacturer's instructions to mount the speakers on a wall.

Q: Can I connect these speakers to a TV without an AV receiver or amplifier?

A: No, the Klipsch Synergy Black Label B-100 Bookshelf Speakers must be connected to an AV receiver or amplifier for audio signal and power. They cannot be connected directly to a TV.

Q: What is the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair?

A: The Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair is a set of two bookshelf speakers that can be used as front or surround speakers. They feature proprietary horn technology, a dynamic .75" tweeter, and a single 4" high-output woofer for accurate, non-fatiguing sound.

Q: What are the dimensions of the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair?

A: The dimensions of each speaker are 9.75” H X 5.88” W X 7.5” D.

Q: What kind of connectivity technology does the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair use?

A: The Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair uses wired connectivity technology.

Q: What is included in the box with the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair?

A: The box includes two pairs of Klipsch Synergy Black Label bookshelf speakers and a power cord. External wiring is not included.

Q: Are these speakers sold in pairs or individually?

A: The Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair is packaged and sold in pairs.

Q: What is the frequency range of the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair?

A: The frequency response of the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair is 64Hz-23KHz ± 3dB.

Q: What kind of connector does the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair use?

A: The Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair is a passive speaker that requires a speaker wire connection to an AV receiver or amplifier for audio signal and power. Standard bare speaker wire, spade lugs, or banana plugs can be used for speaker wire connection.

Q: What is the sensitivity rating of the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair?

A: The Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair has a sensitivity rating of 90dB @ 2.83V / 1m.

Q: Can the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair be used with a Sonos "connect"?

A: The Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair is a passive speaker that requires a receiver or amplifier for power and audio signal. It can be used with a Sonos "connect" as long as it is connected to an amplifier or receiver.

Q: Are these magnetically shielded for use around CRTs and other magnetically sensitive equipment?

A: Yes, the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair is magnetically shielded for use around CRTs and other magnetically sensitive equipment.

Q: Is there a speaker mount that can be used to mount the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair to a ceiling or wall?

A: Yes, the Monoprice Low Profile 22 lb. Capacity Speaker Wall Mount Brackets (Pair) Black can be used to mount the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair to a ceiling or wall.

Q: What is included in the package with the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair?

A: The package includes two pairs of Klipsch Synergy Black Label bookshelf speakers and a power cord. External wiring is not included.

Q: What are customers saying about the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair?

A: Customers have given the Klipsch Synergy Black Label B-100 Bookshelf Speaker Pair a 4.6 out of 5 stars rating on Amazon. They have praised the speakers for their accurate, non-fatiguing sound and value for money. Some customers have noted that the bass response could be improved, but overall they are satisfied with the quality of the speakers.