LEVOIT Core 300 / Core300-P Air Purifier User Manual

Getting Started

• Place the air purifier on a flat, stable surface away from any heat sources, such as radiators or heaters.
• Ensure that there are at least 15 inches of clearance on all sides of the purifier to allow for proper airflow.
• Plug the power cord into a suitable 120V AC, 60Hz power outlet.

Operation Instructions

1. Press the power button located on the top control panel to turn on the air purifier.
2. Select your desired fan speed by pressing the fan speed button. There are three settings: low (1), medium (2), and high (3).
3. To use the timer function, press the timer button to cycle through the 2/4/6/8-hour options.
4. For a quieter operation, especially at night, press the sleep mode button. This will reduce the noise level to a near-silent 24dB.
5. The air quality indicator will change color based on the detected air quality level: blue (good), green (moderate), orange (unhealthy), or red (very unhealthy).
6. The filter indicator will illuminate when it is time to replace the filter.
7. To turn off the display lights for undisturbed sleep, press the display off button.
8. To lock the control panel, press and hold the lock button for 3 seconds. Repeat to unlock.

Filter Replacement

1. Turn off and unplug the air purifier.
2. Flip the purifier upside down and rotate the base cover counterclockwise to open.
3. Remove the used filter and replace it with a new LEVOIT Core 300 filter.
4. Align the base cover with the locking tabs and rotate clockwise to secure.
5. Reset the filter indicator by pressing and holding the filter button for 3 seconds.

Maintenance

• Regularly vacuum the exterior of the purifier and the pre-filter to remove large particles such as dust and hair.
• Replace the filter every 6-8 months, or sooner if the air quality decreases.
• Do not use water or any liquid cleaners to clean the filter or the purifier.

Troubleshooting Tips

• Purifier does not turn on: Ensure that the power cord is securely plugged into both the purifier and the power outlet.
• Unusual noise during operation: Check if the purifier is placed on an even surface and if the filter is properly installed.
• Display lights do not turn on: Press the display off button to ensure the lights are not turned off.
• Reduced airflow: Clean the pre-filter and replace the HEPA filter if necessary.
• Filter indicator remains on after filter change: Reset the filter indicator by pressing and holding the filter button for 3 seconds.

Frequently Asked Questions (FAQ)

What is the recommended room size for the LEVOIT Core 300?

The LEVOIT Core 300 is designed for rooms up to 1095 square feet.

How often should I replace the filter?

The filter should be replaced every 6-8 months, depending on usage and air quality.

Can I wash the HEPA filter?

No, the HEPA filter is not washable. Washing it will damage the filter and affect its performance.

Is the LEVOIT Core 300 ozone-free?

Yes, the LEVOIT Core 300 does not use UV-C light or ions, which produce ozone. It is 100% ozone-free.

How do I know when to replace the filter?

The filter indicator will light up when it is time to replace the filter.

Can I use third-party filters with the LEVOIT Core 300?

It is recommended to use official LEVOIT filters to ensure the best fit and performance. Third-party filters may not provide the same level of air purification and could potentially damage the unit.

What is the power consumption of the LEVOIT Core 300?

The LEVOIT Core 300 has a wattage of 45 watts.

Does the purifier come with a warranty?

Yes, the LEVOIT Core 300 comes with a 2-year warranty.

Can I turn off the display lights?

Yes, you can turn off the display lights by pressing the display off button on the control panel.

Is the air purifier Energy Star certified?

Yes, the LEVOIT Core 300 is Energy Star Verified and meets the energy efficiency guidelines set by the EPA.

For additional support, please refer to the user manual or contact LEVOIT customer service.

Q: What is the coverage area of the LEVOIT Air Purifier Core 300?
A: The LEVOIT Air Purifier Core 300 can cover up to 1095 square feet of space.

Q: What is the CADR (Clean Air Delivery Rate) of the Core 300?
A: The Core 300 has a CADR of 141 CFM (Clean Air Delivery Rate).

Q: What size particles can the Core 300 filter remove?
A: The efficient 3-in-1 filter of the Core 300 can remove particles as small as 0.3 microns (µm), including dust, pollen, and other airborne contaminants.

Q: Are there official replacement filters available for the Core 300?
A: Yes, you can search for B07RSZSYNC to find Levoit's replacement filters for the Core 300. It is recommended to use Levoit's filters for optimal fit and filtration.

Q: Can I choose different replacement filters for specific needs?
A: Yes, you can choose from a variety of replacement filters based on your specific needs. The Toxin Absorber Filter specializes in smog, toxins, and VOCs. The Smoke Remover filter specializes in wildfire smoke and other types of smoke. The Pet Allergy Filter helps capture pet dander and absorb unpleasant odors.

Q: Is the Core 300 air purifier quiet?
A: Yes, the Core 300 features QuietKEAP Technology, which reduces noise levels to a near-silent 24dB. You can also activate Sleep Mode at night for undisturbed operation.

Q: Does the Core 300 have a sleek design?
A: Yes, the Core 300 has a sleek and modern white design that can blend in with any decor.

Q: What certifications does the Core 300 have?
A: The Core 300 is Energy Star Verified and complies with California Air Resources Board (CARB) standards for indoor cleaning devices. It is also FCC certified and ETL listed.

Q: How long is the warranty for the Core 300?
A: The Core 300 comes with a 2-year warranty.

Q: Are batteries required for the Core 300?
A: No, the Core 300 does not require batteries.

Q: What is included in the package?
A: The package includes 1 x Air Purifier, 1 x 3-Stage Original Filter (Pre-Installed), 1 x User Manual, and 1 x Quick Start Guide.