Dosmix M3 Mini Bluetooth Speaker User Manual

Getting Started

Thank you for choosing the Dosmix M3 Mini Bluetooth Speaker. This user manual will guide you through the setup and usage of your new speaker. Please read the instructions carefully before using the speaker to ensure the best performance and to avoid any damage.

Package Contents

• Dosmix M3 Mini Bluetooth Speaker
• Micro USB Charging Cable
• Nylon Lanyard
• User Manual

Product Overview

1. Power Button
2. Volume Up/Next Button
3. Volume Down/Previous Button
4. Micro USB Charging Port
5. LED Indicator Light
6. Nylon Lanyard Hole

Charging the Speaker

Before using the speaker for the first time, please charge it fully. Connect the included Micro USB cable to the charging port on the speaker and plug the other end into a USB power source (such as a computer, wall charger, or power bank). The LED indicator light will turn red while charging and turn off when fully charged. Charging time is approximately 1.5 hours.

Powering On/Off the Speaker

To power on the speaker, press and hold the Power Button for 3 seconds. The LED indicator light will turn blue and you will hear a power-on tone. To power off the speaker, press and hold the Power Button for 3 seconds again. The LED indicator light will turn off and you will hear a power-off tone.

Pairing with a Bluetooth Device

1. Power on the speaker.
2. Enable Bluetooth on your device (smartphone, tablet, laptop, etc.).
3. Search for available Bluetooth devices on your device and select "Dosmix M3" from the list.
4. Once connected, the LED indicator light will turn solid blue and you will hear a connection confirmation tone.

Wireless Stereo Pairing (TWS)

1. Power on both Dosmix M3 speakers.
2. Press and hold the Power Button on one of the speakers for 3 seconds. The two speakers will pair, and you will hear a paired tone (LED light: flashing blue turns solid).
3. Open the Bluetooth settings on your device and connect to one of the two speakers (Model: M3).
4. Music should now play from both speakers. If not, pause the music for 5 seconds, then press play again or repeat the pairing process.

Volume Control and Track Navigation

To increase the volume, press the Volume Up/Next Button. To decrease the volume, press the Volume Down/Previous Button. To skip to the next track, press and hold the Volume Up/Next Button. To go back to the previous track, press and hold the Volume Down/Previous Button.

Troubleshooting Tips

• If the speaker is not turning on, make sure it is charged.
• If the speaker is not pairing with your device, make sure Bluetooth is enabled on your device and the speaker is in pairing mode (LED indicator light flashing blue).
• If you experience audio dropouts or music not playing from both speakers in TWS mode, pause the music for 5 seconds, then press play again or repeat the pairing process.
• If the speaker is not charging, check the Micro USB cable and the power source for any issues.

FAQs

Q: Can I connect the Dosmix M3 to multiple devices at the same time?

A: No, the Dosmix M3 can only be connected to one device at a time.

Q: Can I use the speaker while it is charging?

A: Yes, you can use the speaker while it is charging, but it may take longer to fully charge.

Q: Is the Dosmix M3 waterproof?

A: The speaker is IP65 splashproof, meaning it can withstand light splashes of water but should not be submerged in water.

Q: Can I use the Dosmix M3 with non-Bluetooth devices?

A: The Dosmix M3 does not have an Aux Line-in function, so it can only be used with Bluetooth-enabled devices.

If you have any further questions or concerns, please do not hesitate to contact our customer support team. We are committed to ensuring you have a positive experience with our products.

Product FAQ:

Q: What is the range of the Bluetooth?
A: The Bluetooth range is about 30 ft.

Q: Can you use it while charging?
A: Yes, you can still use it while charging. However, it is not recommended.

Q: How do I get the volume to go down? It's loud.
A: You can adjust the volume through your phone.

Q: Will multiple pieces sync together?
A: No, only two Dosmix M3 speakers can be paired together.

Q: The instructions say to press and hold either one of the speaker buttons, but I only see the on/off button. What am I missing?
A: The power button is also the speaker button for the Dosmix M3 speaker.

Q: Can it get wet in the shower?
A: While you can use it in the shower, it is not recommended to put it in or near water unless it is explicitly stated that the device is waterproof/water-resistant.

Q: How do I turn off the three blue LEDs that flash when audio is played?
A: The Dosmix M3 speaker only has two LED lights, one on each speaker. They will flash if the speakers are not in sync or if the battery is low. If they are blinking for another reason, there might be a defect. Refer to the troubleshooting information that came with your speaker.

Overall, the Dosmix M3 and M5 speakers offer impressive sound quality and are compact and portable, making them great for on-the-go listening. They are compatible with a variety of devices and have fast pairing capabilities. However, it is important to follow instructions carefully and not expose them to excessive water or moisture.