VR-robot Personal AM/FM Pocket Radio Portable User Manual

Table of Contents

1. Introduction
2. Package Contents
3. Getting Started
4. Operating Instructions
5. Troubleshooting
6. Frequently Asked Questions

1. Introduction

Thank you for choosing the VR-robot Personal AM/FM Pocket Radio Portable. This compact and lightweight radio is designed for easy storage and transport, making it the perfect companion for sports, jogging, walking, and other outdoor activities. With its high-quality reception, lock screen feature, and rechargeable battery, you can enjoy your favorite stations wherever you go.

2. Package Contents

• 1 x VR-robot Personal AM/FM Pocket Radio
• 1 x 3.5mm Earphones
• 1 x Lanyard
• 1 x USB Charging Cable

3. Getting Started

1. Charge the radio using the included USB cable. Connect the cable to the radio and a power source (such as a computer or USB wall charger). The charging indicator will turn on, and the radio will be fully charged within 2-3 hours.
2. Insert the 3.5mm earphones into the headphone jack on the radio.
3. Turn on the radio by sliding the power switch to the 'ON' position.

4. Operating Instructions

4.1 Tuning and Preset Stations

1. Switch between AM, FM1, or FM2 by pressing the 'AM/FM' button.
2. Press and hold the 'Tuner +/-' buttons to automatically search for stations. The radio will stop when it finds an effective station.
3. To save a station as a preset, press the 'MEMO' button while tuned to the desired station. The Memo icon and memory location number will flash at the top right of the screen. Press 'MEMO' again to save the station, or use the 'M-/M+' buttons to change the memory location number.
4. To tune to a preset station, press the 'M-/M+' buttons until the desired station is displayed.

4.2 Lock Screen

To prevent accidental operation, slide the lock switch to the 'LOCK' position. This will disable all buttons on the radio. To unlock, slide the switch back to the 'OFF' position.

4.3 Deleting Preset Stations

1. Press the 'M-/M+' buttons to navigate to the station you wish to delete.
2. Press and hold the 'DEL' button to remove the station from your presets.

5. Troubleshooting

1. Problem: The radio is not turning on.
   Solution: Make sure the radio is charged and the power switch is in the 'ON' position. If the problem persists, try charging the radio using a different USB cable or power source.
2. Problem: Poor reception or static.
   Solution: Adjust the position of the radio or move to a different location with better reception. Make sure the antenna is fully extended for optimal reception.
3. Problem: The radio is not saving preset stations.
   Solution: Make sure to press the 'MEMO' button twice when saving a station, and ensure the memory location number is correct. If the problem persists, try resetting the radio by turning it off and on again.

6. Frequently Asked Questions

1. Q: Can I use this radio without earphones?
   A: No, this radio does not have a built-in speaker and requires earphones to listen to stations.
2. Q: How long does the battery last on a full charge?
   A: The built-in 500mAh rechargeable battery provides a long working time, but the exact duration will depend on usage and volume settings.
3. Q: Can I charge the radio while listening to it?
   A: Yes, you can charge the radio using the included USB cable while listening to stations.
4. Q: Is the radio water-resistant?
   A: The VR-robot Personal AM/FM Pocket Radio is not water-resistant. It is recommended to keep the radio away from water and moisture.

Product FAQ:

Q: Can I use any wired headphones with this radio?
A: If they are compatible with a 3.5mm stereo headphone jack, they can all be used with this portable radio.

Q: Is it stereo?
A: Yes, it is stereo.

Q: Does the radio come with batteries?
A: No, it has a built-in rechargeable lithium-ion battery. You don’t need to buy additional batteries for it.

Q: Does it work without headphones?
A: No, it only works with headphones or earbuds.

Q: Can I charge this safely with an iPhone 5V cube?
A: Yes, you can charge it safely with an iPhone 5V cube.

Q: How long is the earbud cord?
A: The included 3.5mm earphones are approximately 2.5 feet in length.

Q: How do you insert the lanyard?
A: Take the end with the thin loop and pinch it with your finger so it will pass through the anchor hole on the top right of the radio. Once it is through, pass the other end of the lanyard through the string loop that you just passed through the hole of the plastic anchor. Pull it all the way through and your lanyard will be secured.

Q: What is the USB cable for?
A: The USB cable is used to charge the portable radio.

Q: Is the battery replaceable and do you sell replacements if it is?
A: No, it has a built-in rechargeable lithium-ion battery that is not replaceable.

Q: Does it have a voice recorder function?
A: No, this portable radio currently does not support a recording function.