USCCE Digital Alarm Clock Radio User Manual
Table of Contents
- Introduction
- Setting Up Your Alarm Clock
- Adjusting the Display Brightness
- Setting the Time and Alarm
- Customizing Alarm Settings
- Using the FM Radio
- Charging Devices with USB Ports
- Battery Backup
- Troubleshooting Tips
- Frequently Asked Questions
1. Introduction
Welcome to your new USCCE Digital Alarm Clock Radio! This user
manual will guide you through setting up and using your alarm
clock, as well as provide troubleshooting tips and frequently asked
questions. Your USCCE Digital Alarm Clock Radio features a 0-100%
adjustable dimmer, dual alarms with weekday/weekend mode, 6
adjustable volume sounds, FM radio with sleep timer, snooze, 2 USB
charging ports, thermometer, and battery backup.
2. Setting Up Your Alarm Clock
Plug the power cord into a wall outlet. Optionally, insert 3 AAA
batteries (not included) as a backup in case of power outage.
Please note that batteries should only be used as a backup and not
for everyday operation, as they may drain quickly.
3. Adjusting the Display Brightness
Use the dial on the back of the alarm clock to adjust the
display brightness from 0 to 100%. You can turn the brightness
completely off for a darker bedroom or adjust it to be bright
enough to easily read the time from across the room.
4. Setting the Time and Alarm
Press and hold the "TIME SET" button until the hour starts
blinking. Use the rotary dial to adjust the hour, then press "TIME
SET" again to move to the minutes. Adjust the minutes using the
rotary dial and press "TIME SET" once more to confirm your
settings.
To set the alarm, press and hold the "ALARM 1" or "ALARM 2"
button until the hour starts blinking. Use the rotary dial to
adjust the hour, then press the corresponding alarm button again to
move to the minutes. Adjust the minutes using the rotary dial and
press the alarm button once more to confirm your settings.
5. Customizing Alarm Settings
Use the switches on the back of the alarm clock to set the alarm
mode for each alarm: Mon-Fri, Sat-Sun, or Mon-Sun. Choose one of
the 5 built-in tones (Beep/Piano/Buzzer/Bird/Soft Music) or radio
as your wake-up sound. The volume of the alarm can be adjusted from
level 3 to 16 by pressing the "VOL+" or "VOL-" buttons when the
radio is off.
To activate the snooze function, press the "SNOOZE" button when
the alarm is sounding. This will give you an extra 9 minutes of
slumber before the alarm sounds again.
6. Using the FM Radio
Press the "RADIO" button to turn on the FM radio. Use the rotary
dial to tune to your desired station, and adjust the volume using
the "VOL+" or "VOL-" buttons. You can save up to 40 stations by
pressing and holding the "PRESET" button while tuned to your
desired station. To set a specific station as your wake-up sound,
press and hold the "SNOOZE" button while playing that station.
To activate the sleep timer function, press and hold the "SLEEP"
button and use the rotary dial to set the desired sleep time
(10-150 minutes). The radio will turn off automatically after the
set time has elapsed.
For private listening, plug your headphones into the 3.5mm
headphone jack on the back of the alarm clock.
7. Charging Devices with USB Ports
Use the 2 USB ports on the front of the alarm clock to charge
your phone or other mobile devices while you sleep. Please note
that the USB ports will not charge devices when using battery
backup.
8. Battery Backup
In case of a power outage, the alarm clock can be backed up with
3 AAA batteries (not included). This will restore the time,
settings, alarm, and radio functions. Please note that the USB
ports will not charge devices during battery backup mode.
9. Troubleshooting Tips
- If the alarm clock is not turning on, check the power cord
connection and ensure it is plugged into a working wall
outlet.
- If the display is too dim or too bright, adjust the brightness
using the dial on the back of the alarm clock.
- If the alarm is not sounding, ensure the correct alarm mode is
selected and the volume is set to an audible level.
- If the FM radio is not functioning properly, ensure the antenna
is fully extended and try adjusting the rotary dial for better
reception.
10. Frequently Asked Questions
- Q: Can I set different alarm sounds for each alarm?
- A: Yes, you can choose one of the 5 built-in tones or radio as
your wake-up sound for each alarm separately.
- Q: Can I turn off the display completely?
- A: Yes, you can use the dial on the back of the alarm clock to
adjust the display brightness from 0 to 100%, including turning it
off completely.
- Q: Can I listen to the radio with headphones?
- A: Yes, there is a 3.5mm headphone jack on the back of the
alarm clock for private listening.
- Q: Will the USB ports charge devices during battery backup
mode?
- A: No, the USB ports will not charge devices during battery
backup mode.
- Q: Can I use the alarm clock without plugging it in and only
using batteries?
- A: While the alarm clock can be powered by 3 AAA batteries (not
included), it is recommended to use them only as a backup during
power outages, as batteries may drain quickly.
If you have any further questions or require assistance, please
do not hesitate to contact us. We are always here to help!
FAQ [continued]
Q: What are the dimensions of the USCCE Digital Alarm Clock
Radio?
A: The dimensions of the clock are 4.25 inches in length, 2.56
inches in height, and 3.27 inches in width.
Q: Can the radio turn off automatically after a certain amount of
time if used as an alarm?
A: Yes, the radio will turn off after one hour if it is used as an
alarm and not turned off manually.
Q: Does the clock have a battery backup?
A: Yes, the clock can be backed up with 3 AAA batteries (not
included) in case of a power outage. However, it is recommended to
only use this feature as a backup and not for everyday
operation.
Q: Can the brightness of the display be adjusted?
A: Yes, the brightness of the 3.4-inch compact LCD display can be
adjusted from 0 to 100% with a dial control.
Q: Are there different alarm sounds to choose from?
A: Yes, there are five built-in tones (Beep/Piano/Buzzer/Bird/Soft
Music) or radio as wake up sound, which gradually increases in
volume from gentle to the level you set (options from level 3 to
16).
Q: Can I charge my phone using this clock?
A: Yes, there are two USB ports that can be used to charge mobile
devices while you sleep.
Q: Does the clock have a programmable sleep timer?
A: Yes, the clock has a sleep timer function (10-150min) that
allows you to fall asleep with your favorite station playing.
Q: Is there a headphone jack on this clock?
A: Yes, there is a 3.5mm headphone jack that comes in handy when
you don't want to disturb others nearby.
Q: Can I save and switch between saved radio stations on this
clock?
A: Yes, during setup, the clock scans the FM band and saves all the
received stations. After setup, you can change saved stations by
rotating the big snooze dial on top.
Q: Does the clock automatically re-set itself for time changes?
A: No, it has to be done manually. However, it is an easy process
by pressing the clock button until the hour flashes, turning the
knob clockwise for forward or counter-clockwise to go back, and
then pressing the clock button again to set the minutes.
Specifications
Brand | Uscce |
Manufacturer | USCCE |
Model Number | Dual Digital Radio Alarm Clock |
Product Dimensions | 4.25 x 3.27 x 2.56 inches |
Item Weight | 10.8 ounces |
ASIN | B07YNX5D1V |
Item model number | Dual Digital Radio Alarm Clock |
Customer Reviews | 4.4 out of 5 stars 12,578 ratings 4.4 out of 5 stars |
Best Sellers Rank | #454 in Electronics |
Date First Available | October 3, 2019 |
Country of Origin | China |
Style | Digital |
Material | Plastic |
Color | Black |
Shape | Rectangular |
Power Source | Corded-Electric, Battery |
Special Feature | Timer, Adjustable Brightness, Temperature Display, Adjustable Volume, Charging Port |
Theme | Easter, Christmas, Fantasy, Halloween |
Frame Material | Acrylonitrile Butadiene Styrene |
Display Type | LCD |
Material | Acrylonitrile Butadiene Styrene |
Weight | 10.8 ounces |
Dimensions | 4.25 x 3.27 x 2.56 inches |
First Available | October 3, 2019 |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.