Georges Cric hydraulique pour Voiture 2,5 tonnes
User Manual for Georges Cric Hydraulic Jack
Product Overview
The Georges Cric Hydraulic Jack is a low-profile, heavy-duty car
jack designed to lift vehicles up to 2.5 tonnes with a minimum
height of 80 mm and a maximum height of 360 mm. It is equipped with
a hydraulic pressure/overflow valve for smooth lowering, fixed and
swivel metal wheels for mobility, a long lever rod for easy
lifting, and a PVC handle for transportation.
Specifications
- Brand: GEORGES
- Category: Auto et Moto > Outils et dépannage >
Équipements garage et atelier > Élévateurs, grues d'atelier et
crics > Crics de levage
- Maximum Load Capacity: 2.5 tonnes (2500 kg)
- Maximum Lifting Height: 360 mm
- Minimum Height: 80 mm
- Color: Black
Instructions for Use
- Before using the jack, ensure that the vehicle is parked on a
flat and stable surface, and the parking brake is engaged.
- Place wheel chocks behind the wheels to prevent the vehicle
from rolling.
- Locate the vehicle's designated lifting points as per the
manufacturer's manual.
- Position the jack so that the saddle is directly underneath the
lifting point of the vehicle.
- Ensure that the release valve is closed by turning the handle
clockwise.
- Pump the lever rod up and down to raise the saddle until it
comes into contact with the vehicle's lifting point.
- Continue to pump the lever rod until the vehicle is lifted to
the desired height.
- Once the vehicle is at the desired height, place jack stands
under the vehicle for support before starting any work.
- To lower the vehicle, slowly turn the handle counterclockwise
to open the release valve, allowing the vehicle to descend smoothly
and safely.
Troubleshooting Tips
- Jack Not Lifting
- - Check the hydraulic fluid level and refill if necessary.
- Ensure the release valve is fully closed by turning the handle
clockwise.
- Verify that the weight of the vehicle does not exceed the maximum
lifting capacity of 2.5 tonnes.
- Jack Lowers Too Quickly
- - Turn the release valve counterclockwise slowly to control the
descent rate.
- If the problem persists, the jack may need servicing or
repair.
- Jack is Unstable
- - Confirm that the jack is placed on a flat and stable
surface.
- Check that all wheels are firmly on the ground and the saddle is
correctly positioned under the lifting point.
Frequently Asked Questions (FAQs)
What should I do if the hydraulic jack does not lift?
Ensure the hydraulic fluid level is sufficient, the release
valve is fully closed, and the weight of the vehicle is within the
jack's capacity.
How do I maintain my hydraulic jack?
Regularly check the hydraulic fluid level, keep the jack clean,
and store it in a dry place. Lubricate moving parts as needed.
Can this jack be used for SUVs?
Yes, the jack comes with an SUV adapter and should be used in
accordance with the SUV's lifting point specifications.
What is the minimum height required for this jack?
The minimum height for this jack is 80 mm, making it suitable
for vehicles with low clearance.
Is there a warranty for this hydraulic jack?
Please refer to the manufacturer's documentation or contact
customer service for warranty information.
What should I do if I received a damaged or previously used
jack?
Contact the seller immediately to report the issue and request a
replacement or refund.
How do I know if the jack is suitable for my car?
Check your vehicle's weight and ground clearance to ensure
compatibility with the jack's specifications.
FAQ [continued]
Q: What is the maximum lifting capacity of the Georges Cric
hydraulique pour Voiture?
A: The maximum lifting capacity of this car jack is 2.5 tons (2,500
kg).
Q: What is the maximum lifting height of this car jack?
A: The maximum lifting height is 360 millimeters.
Q: Does it come with an SUV adapter and rubber support?
A: Yes, this car jack comes with an SUV adapter and a rubber
support.
Q: Does it have continuous vehicle lowering capability?
A: Yes, this car jack has continuous vehicle lowering capability
thanks to the pressure release valve/safety and overload valve.
Q: What type of wheels does it have?
A: This car jack has 2 fixed metal wheels and 2 swivel metal
wheels.
Q: Is there a long lever handle for easier lifting?
A: Yes, there is a long lever handle for easier lifting, as well as
a PVC carrying handle.
Q: Is there any warranty for this product?
A: The warranty information for this product is not provided in the
available information.
Q: Is this car jack suitable for all car models?
A: According to a customer review, the unit as supplied may not be
suitable for some car models. However, the reviewer mentioned
modifying the cup unit to make it usable.
Specifications
Brand | GEORGES |
Category | Auto et Moto > Outils et dépannage > Équipements garage et atelier > Élévateurs, grues d'atelier et crics > Crics de levage |
Charge maximale | 2,5 tons |
Hauteur maximale de soulèvement | 360 Millimètres |
Marque | GEORGES |
Couleur | noir |
Color | noir |
The content on this website is generated using the GPT (Generative Pre-trained Transformer) model, an artificial intelligence language model developed by OpenAI. While this technology is advanced and can produce highly coherent text, it is important for users to understand that the information and opinions expressed on this site may not be accurate, reliable, or up-to-date.
Please be aware that the GPT-generated content may include errors, inaccuracies, or misleading information, and should not be relied upon as a sole source of information or guidance. The website owner and its affiliates disclaim all liability for any loss, damage, or inconvenience that may arise from the use or reliance on the content provided.
We encourage users to verify any critical information obtained from this site with other reliable sources, and to consult with a qualified professional before making any decisions based on the content.
By using this website, you acknowledge and agree to these limitations and understand that the GPT-generated content is provided "as is" without any warranties or guarantees of any kind.